1. Introduction
The Newfast NF-A882 is a high-power outdoor Access Point (AP) designed to provide robust and extensive wireless coverage. Featuring a dual-band 1200Mbps wireless transmission rate, it is built to withstand various harsh outdoor environments with its sophisticated waterproof, lightning-proof, moisture-proof, and freeze-proof design. This device is ideal for creating a reliable outdoor WiFi network in large areas such as squares, resorts, scenic spots, and business premises.
2. Package Contents
Please check the box for the following items:
- Outdoor AP (NF-A882) x 1
- Network Cable x 1
- 48V POE Power Adapter x 1
- Installation Guide x 1
- Tie Straps
- Waterproof Cap
- Sealing Gasket Screw
3. Specifications
| Feature | Description |
|---|---|
| Hardware Specification | DDR: 128MB, Flash: 16MB |
| Antenna | External 2*5dBi Omnidirectional Antennas |
| Wireless Rate | 2.4GHz: 300Mbps, 5GHz: 867Mbps (Total 1200Mbps) |
| RF Parameters | Output Power (Max): 250mW (24dBm); Receiving Sensitivity (Min): -98dBm |
| Frequency | 802.11b/g/n/a/ac; 2.412GHz-2.472GHz, 5.180GHz-5.825GHz |
| Physical Ports | 1*10/100/1000Mbps WAN RJ45 Ethernet Port, 2*10/100/1000Mbps LAN RJ45 Ethernet Ports, 1*Reset Button, 1*DC Port |
| Power Adapter | 48V 0.32A POE Power (0-100m) |
| IP Index | IP66 (Windproof, rainproof, lightning proof) |
| MTBF | >250000H |
| Installation Way | Pole-mounted, Wall-mounted |
| Case Material | Plastic Case (Imported ABS Material) |
| Physical Dimensions | 90mm*406mm*42mm |
| Indicator Lights | WIFI, LAN, WAN, POWER |
| Working Environment | Working Temperature: 0°C to 40°C; Storage Temperature: -40°C to 70°C; Working Humidity: 10%-90%RH Non-condensing; Storage Humidity: 5%-90%RH Non-condensing |
| Max. Users Supported | 120+ |
| WiFi Coverage | 100-200M (without obstacles) |
| Supports WPS | No |
| Supports WDS | No |
| Supports Mesh | Not Supported |
4. Setup and Installation
The NF-A882 offers flexible deployment options and simplified installation thanks to its Power over Ethernet (PoE) support.
4.1 Physical Installation
The device can be mounted on a pole or a wall. Ensure the chosen location provides optimal signal coverage and is protected from direct physical impact.
- Pole Mounting: Use the provided tie straps to secure the AP to a pole.
- Wall Mounting: Use the sealing gasket screws to attach the AP securely to a wall.
4.2 Power and Network Connection
The NF-A882 supports 48V PoE power supply, meaning a single network cable can provide both power and data. This simplifies installation by eliminating the need for additional power cables.
- Connect one end of the network cable to the WAN port of the NF-A882.
- Connect the other end of the network cable to the PoE injector's 'PoE Out' port.
- Connect a separate network cable from your router/modem to the PoE injector's 'LAN In' port.
- Plug the 48V POE Power Adapter into a power outlet and connect it to the PoE injector.
- The device will power on, and indicator lights will illuminate.
5. Operating Modes
The NF-A882 supports multiple operating modes to suit various network requirements:
- Router Mode: The device acts as a primary router, providing internet access to connected devices.
- AP (Access Point) Mode: The device extends an existing wired network to a wireless network.
- Bridge Mode: Connects two or more wired networks wirelessly.
- Repeater Mode: Extends the coverage of an existing wireless network by repeating its signal.
Configuration of these modes is typically done via the device's web interface, accessible through a web browser after initial connection.
6. Maintenance
To ensure optimal performance and longevity of your Newfast NF-A882, consider the following maintenance tips:
- Regular Cleaning: Periodically clean the exterior of the device to prevent dust and debris buildup, especially around the ports and antennas. Use a soft, dry cloth.
- Firmware Updates: Check the manufacturer's website regularly for firmware updates. Keeping the firmware updated can improve performance, add new features, and enhance security.
- Environmental Protection: Although IP66 rated for weather resistance, avoid exposing the device to extreme conditions beyond its specified operating range. Ensure waterproof caps are securely fastened.
- Cable Integrity: Periodically inspect network and power cables for any signs of wear or damage. Replace damaged cables immediately.
7. Troubleshooting
7.1 No Power/Device Not Turning On
- Check if the PoE power adapter is correctly connected to a working power outlet.
- Ensure the network cable is securely connected to the PoE injector's 'PoE Out' port and the NF-A882's WAN port.
- Verify the PoE injector is receiving power and its indicator lights are on.
7.2 No Internet Connection
- Confirm that your main router/modem is working correctly and has an active internet connection.
- Check the network cable connection between your main router/modem and the PoE injector's 'LAN In' port.
- Ensure the NF-A882 is configured in the correct operating mode (e.g., AP mode if extending an existing network).
- Restart the NF-A882 and your main router/modem.
7.3 Weak or Unstable WiFi Signal
- Relocate the NF-A882 to a more central position or higher elevation to minimize obstructions.
- Ensure the antennas are properly oriented.
- Check for sources of interference (e.g., other wireless devices, microwaves, thick walls).
- Verify that the device is within the optimal coverage range (100-200 meters without obstacles).
8. User Tips
- Optimal Placement: For best outdoor coverage, mount the AP in an elevated position with minimal obstructions to ensure the 100-200 meter radius is utilized effectively.
- PoE Advantage: Leverage the Power over Ethernet (PoE) feature to simplify installation. A single Ethernet cable can carry both power and data, reducing cable clutter and installation complexity.
- Mode Selection: Choose the appropriate operating mode (Router, AP, Bridge, or Repeater) based on your specific network needs to maximize performance and efficiency.
- Device Capacity: The NF-A882 can support over 120 users. For optimal performance, consider the number of connected devices and their bandwidth usage.
- Not a Cellular Router: This device is a WiFi Access Point/Router and does not support direct SIM card input for cellular data. It requires a wired internet connection to function.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Newfast website or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.
