OBDOK Renolink V2.10

Contents

Renolink V2.10 Software Instruction Manual

Model: Renolink V2.10 | Brand: OBDOK

1. Introduction

The Renolink V2.10 software is a powerful diagnostic and programming tool designed for Renault and Dacia vehicles. It offers a wide range of functionalities including UCH matching, airbag programming, engine ECU programming, key coding, key deletion, dashboard coding, and EEPROM/flash reading and writing.

This software connects to vehicles via the OBD socket, allowing for easy programming and unit introduction without the need to disassemble ECUs, EPROMs, or flash drives. It enables users to virginize and re-program components such as UCH, motor brackets, indicators, airbag modules, and fuse tables, whether they are new or used parts.

2. Important Notices

  • Software Activation Required: Renolink V2.10 software requires activation to function correctly. The activation steps are detailed in the setup section of this manual.
  • Beware of Pirated Software: Any Renolink V2.10 software that claims to not require activation is pirated. Such versions often have a changed name but are essentially older versions (e.g., V1.99). Always ensure you are using genuine, activated software.
  • Software Delivery: The software is provided via a download link, not a physical CD, to prevent damage during transit. Please contact the seller after placing your order to receive the software link and activation assistance.
  • System Requirements: The software is compatible with Windows 10 or Windows 11. Windows 10 is preferred for optimal performance.
  • Security Software: It is crucial to disable any antivirus software and firewall on your computer before downloading and installing the Renolink V2.10 software.
  • Activation Policy: Each software activation is tied to a single computer. If you change your computer, a new software purchase and activation will be required. Each order includes one activation.
  • Hardware Compatibility: Renolink V2.10 software is exclusively designed to support Renolink and OBDLink hardware.
  • Remote Installation: The seller provides software links and activation services only. Remote installation support is not included and may incur additional fees if requested.

3. Setup Guide

3.1. Software Installation

  1. Download Software: After purchase, contact the seller to receive the download link for the Renolink V2.10 software.
  2. Prepare Your System: Before downloading and installing, ensure your computer is running Windows 10 (recommended) or Windows 11. Temporarily disable your antivirus software and firewall to prevent interference during installation.
  3. Run Installer: Locate the downloaded installer file (e.g., 'renolink_setup_199' as shown in the image) and run it to begin the installation process.
    Renolink V1.99 Setup File

    Figure 1: Renolink setup file example.

3.2. Software Activation

The Renolink V2.10 software requires activation after installation. Follow these steps:

  1. Launch Renolink: Double-click the Renolink shortcut on your desktop to open the application. You may see a warning about Latency Timer; click OK.

    Video 1: Renolink V2.10 software launch and initial warning.

  2. Generate Hardware ID: The software will prompt you for activation. You will need to generate a hardware ID from your PC. This is typically done through a 'License Generator' tool or directly within the Renolink application.
    Renolink License Generator showing Hardware ID

    Figure 2: License Generator interface displaying Hardware ID.

  3. Send ID to Seller: Copy your unique Hardware ID and send it to the seller. The seller will then generate a registration key for you.
  4. Receive Registration Key: The seller will provide you with a registration key.
  5. Activate Software: Enter the provided registration key into the License Generator or the Renolink software to complete the activation. This process may involve saving a license file (e.g., 'renolink.txt' as shown in the image).
    Saving renolink.txt license file

    Figure 3: Saving the license file during activation.


    Renolink License Generator with serial numbers

    Figure 4: License Generator with serial numbers and device info.

4. Operating Instructions

Once the Renolink V2.10 software is installed and activated, you can begin using it for vehicle diagnostics and programming.

4.1. Connecting to Vehicle and Scanning

  1. Connect Hardware: Connect your Renolink or OBDLink hardware to your vehicle's OBD-II port and to your computer.
  2. Launch Renolink Software: Open the Renolink V2.10 application.
  3. Initiate Scan: Click on the 'Scan' menu option. In the 'Scan' window, select the desired ECU option (e.g., 'ECM' for Engine Control Module) from the dropdown menu. Choose the appropriate scan protocol (e.g., 'DiagOnCAN'). Click 'Scan' to begin.
    Renolink Scan window with ECU selection

    Figure 5: Scan window showing ECU selection and protocol options.


    Renolink Scan in progress

    Figure 6: Scan results displaying ECU information.

  4. Access Data: After scanning, you can navigate through various screens and services on the left panel, such as 'ReadMemoryByAddress', 'Validation Routines Tests', and 'Validation Services', to access specific data and functions.
    Renolink Read Memory By Address screen

    Figure 7: Read Memory By Address interface.


    Renolink Validation Routines Tests screen

    Figure 8: Validation Routines Tests interface.

4.2. Specific Functions

Renolink V2.10 provides dedicated interfaces for various programming tasks:

  • ECM Flash: Use this function to Read/Write Eeprom, Read/Write Flash, Read Immo Status, or Clear Immo for the Engine Control Module.
    Renolink ECM Flash interface

    Figure 9: ECM Flash options for reading and writing data.

  • Airbag Cleaner: Select the specific airbag type (e.g., 'AB90 for Clio3, Modus') from the dropdown menu and click 'Connect' or 'Disconnect'.
    Renolink Airbag Cleaner interface

    Figure 10: Airbag Cleaner interface with model selection.

  • Keys Programming: Choose the appropriate UCH type (e.g., 'BMT Sagem (Kangoo, Master, Clio2 ph1, Twingo ph2, Solenza, Supernova) - 2003') for key programming.
    Renolink Keys programming interface

    Figure 11: Keys programming interface showing UCH options.

  • TDB (Cluster) Programming: This function allows you to Read/Write KM (Kilometers), Read/Write Eeprom, and Read/Write Flash for the dashboard.
    Renolink TDB (Cluster) interface

    Figure 12: TDB (Cluster) interface for mileage and memory operations.

  • ABS Programming: Select the specific ABS type (e.g., 'Abs ATE for Laguna3, Megane3, Fluence, Latitude') and perform operations like Write KM, Write Eeprom, or Write Flash.
    Renolink ABS interface

    Figure 13: ABS interface for various operations.

  • Language Selection: The software supports multiple languages. Navigate to 'Language' in the menu bar to select between English, French, and Polish.
    Renolink Language selection menu

    Figure 14: Language selection dropdown menu.

4.3. Data Frames (Trame) Overview

The 'Screens' section on the left panel provides access to various data frames, allowing you to monitor and analyze different parameters:

  • Trame 01 Parametres generaux: General parameters.
    Renolink Trame 01 Parametres generaux screen

    Figure 15: General parameters data frame.

  • Trame 02 Etats et Parametres secondaires: Secondary states and parameters.
    Renolink Trame 02 Etats et Parametres secondaires screen

    Figure 16: Secondary states and parameters data frame.

  • Trame 03 Papillon-Pedale: Throttle-Pedal parameters.
    Renolink Trame 03 Papillon-Pedale screen

    Figure 17: Throttle-Pedal data frame.

  • Trame 04 Adaptatif de richesse 1: Richness adaptation parameters.
    Renolink Trame 04 Adaptatif de richesse 1 screen

    Figure 18: Richness adaptation data frame.

  • Trame 05 Ralenti et VVT: Idle and VVT parameters.
    Renolink Trame 05 Ralenti et VVT screen

    Figure 19: Idle and VVT data frame.

  • Trame 06 Structure Couple: Torque structure parameters.
    Renolink Trame 06 Structure Couple screen

    Figure 20: Torque structure data frame.

  • Trame 07 OBD: OBD parameters.
    Renolink Trame 07 OBD screen

    Figure 21: OBD data frame.

  • Trame 08 Usine: Factory settings/parameters.
    Renolink Trame 08 Usine screen

    Figure 22: Factory settings data frame.

  • Trame 09 Detrompage: Detrompage parameters.
    Renolink Trame 09 Detrompage screen

    Figure 23: Detrompage data frame.

  • Trame 10 Parametres Etudes: Study parameters.
    Renolink Trame 10 Parametres Etudes screen

    Figure 24: Study parameters data frame.

  • Trame 11 Throttle Area Curve: Throttle area curve parameters.
    Renolink Trame 11 Throttle Area Curve screen

    Figure 25: Throttle Area Curve data frame.

  • Trame 31 CLIM: Climate control parameters.
    Renolink Trame 31 CLIM screen

    Figure 26: Climate control data frame.

5. Key Features

Renolink V2.10 offers enhanced capabilities for various Renault and Dacia models:

  • Steering Assist Virginizer: Supports Renault Megane 4, Scenic 4, Kadjar, and Talisman. Coding is performed automatically upon the first ignition.
  • Card Programming: Added support for card programming for Clio4 (2012-2015), incorporating a new database from July 2019.
  • Power Steering Immo Code Deletion: Ability to delete the immobilizer code from the power steering (DAE) in Dacia Duster ph3. Encoding is automatic.
  • ECU Learning: Supports learning ECUs from DACIA Logan 2, Sandero, Lodgy, Docker, and Duster ph2.
  • Dashboard Operations (Dacia): Read/write EEPROM and flash for dashboards in Dacia Logan2, Sandero2, Lodgy, Docker, and Duster ph2 from years 2013-2014 and 2014-2017.
  • Dashboard Operations (Renault):
    • Read/write flash, EEPROM, and KM for VDO dashboards in Mégane 3 and Fluence 2015+.
    • Read and write flash, EEPROM, and KM for Laguna 3 dashboards.
    • Read/write KM, EEPROM, and flash for Renault Fluence dashboards.
    • Read/write KM for Renault Modus dashboards.
    • Read/write KM and EEPROM for Koleos dashboards.
  • Key Programming UCH BMT Sagem: Supports key programming for Dacia Solenza, Supernova, Renault Twingo, Kangoo, and Master (years 1998-2003).
  • Key Programming (Specific Models): Dedicated key programming for Dacia Logan 2, Sandero 2, Duster ph 2, Lodgy, Dokker, and Renault Clio Symbol 3.

6. User Tips

  • Interface Connection Issues: If you encounter an "interface not connected" error, ensure your Renolink or OBDLink hardware is correctly connected to both the vehicle and your computer. Verify that the necessary drivers for your hardware are installed and up-to-date. Also, confirm that the software has been properly activated and that your antivirus/firewall are temporarily disabled.
  • Software Updates: Always check for official software updates to ensure compatibility with the latest vehicle models and to benefit from new features and bug fixes.

7. Troubleshooting

7.1. "Interface Connected Diagnostic Not Running" or "Interface Not Connected" Error

If you receive a message indicating that the interface is not connected or the diagnostic is not running, consider the following:

  • Hardware Connection: Double-check that your Renolink/OBDLink hardware is securely plugged into the vehicle's OBD-II port and your computer's USB port.
  • Driver Installation: Ensure that the correct drivers for your specific Renolink or OBDLink hardware are properly installed on your computer. You may need to reinstall them.
  • Software Activation: Confirm that your Renolink V2.10 software has been successfully activated with the registration key provided by the seller. Unactivated software will not function.
  • Antivirus/Firewall: Temporarily disable your antivirus software and firewall. These security measures can sometimes block the communication between the software and the hardware.
  • Hardware Compatibility: Verify that you are using genuine Renolink or OBDLink hardware, as the software is designed to work only with these specific devices.
  • Computer System: Ensure your operating system is Windows 10 or 11. Incompatible OS versions may lead to connection issues.

8. Specifications

AttributeValue
Item TypeSOFTWARE
Brand NameOBDOK
Model NameRenolink V2.10
Software VersionRenolink V2.10
Hardware Versionno hardware (software only)
External Testing Certificationce
CertificationCE
OriginMainland China
Item Weight0.01kg
Is Batteries IncludedNo
ElectronicNo
UseNot Telecommunication
High-concerned chemicalNone
Voltage-
Power (W)-
MaterialV2.10 Added Extra Function

9. Support

For any questions regarding software download, activation, or technical issues, please contact the seller directly for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.