1. Introduction
The JIKONG JK BMS (Battery Management System) is an intelligent active balance power management system designed for large capacity series lithium battery packs. It provides comprehensive protection and management features to ensure the safety and longevity of your battery system.
This manual provides detailed instructions for the safe and efficient use of your JIKONG JK BMS. Please read it thoroughly before installation and operation.
2. Safety Precautions
WARNING: Failure to follow these safety instructions may result in fire, electric shock, or other injury or damage.
- Always read the instruction manual carefully before use.
- Connect the cables from the negative terminal to the positive terminal according to the wiring diagram for the corresponding number of strings.
- After connecting the balanced wire, use a multimeter to confirm correct wiring before inserting the protection board.
- The default password for the protection board is '1234', and the default authorization password is '123456'. After connecting the mobile phone APP to the protection board, change the connection password immediately to prevent unauthorized access.
- Do not modify the power line of the protection board without permission. Unauthorized modification can cause uneven overcurrent and burn the protection board.
- Ensure the BMS is securely fixed to the battery pack to prevent abnormal operation or damage.
3. Product Overview
The JIKONG JK BMS is designed to manage and protect various lithium battery types, including LiFePo4, Li-ion, and LTO. It features:
- Voltage acquisition and high current active balancing (1A/2A continuous balance current).
- Overcharge, over-discharge, overcurrent, and over-temperature protection.
- Coulomb meter for accurate capacity tracking.
- Bluetooth communication for mobile APP connectivity (Android and iOS).
- Optional GPS and external display interfaces.
- Optional heating function for low-temperature environments.
- Optional parallel function for energy storage systems.
- Optional ACC detection function.
- Intelligent sleep mode to reduce self-consumption.
- Emergency switch function for critical situations.
The active balancing technology transfers energy from higher voltage cells to lower voltage cells, ensuring battery consistency, extending range, and delaying aging. This lossless balancing method allows for larger balancing currents (0.4-2A) without generating excessive heat.
Figure 3.1: JIKONG Intelligent Active Balanced Power Management System (BMS) Overview
Figure 3.2: Diverse Application Scenarios for JIKONG BMS
4. Specifications
4.1. General Parameters
| Parameter | Value | Unit |
|---|---|---|
| Supply Voltage | 7.5-36 | V |
| Operating Power Consumption | <900 | mW |
| Operating Temperature | -30-70 | °C |
| Max. Number of Collection Strings | 8 (for JK-BxA8S-20P) / 24 (for other models) | String |
| Max. Balancing Current | 1-2 | A |
| Max. Charging Current | 200-300 | A |
| Max. Discharge Current | 200-300 | A |
| Max. Instantaneous Current | 400 | A |
| Max. Internal Loop Resistance | 0.35 | mΩ |
| Protective Plate Size (JK-BxA8S-20P) | 152.25×127.26×15.6 | mm |
| Finished Weight (JK-BxA8S-20P) | 424 | g |
4.2. Default Protection Parameters (Example for Li-ion)
| Parameter | Li-ion (Default) | Unit |
|---|---|---|
| Balancing Initial Voltage | 3 | V |
| Max. Balancing Current | 2 | A |
| Single Overcharge Voltage | 4.2 | V |
| Single Overcharge Recovery | 4.18 | V |
| Single Undervoltage Protection | 2.82 | V |
| Single Undervoltage Recovery | 2.85 | V |
| Automatic Shutdown Voltage | 2.8 | V |
| SOC-0% Voltage | 2.9 | V |
| SOC-100% Voltage | 4.18 | V |
| Trigger Balancing Differential Pressure | 0.01 | V |
| Charging Overcurrent Protection Delay | 30 | S |
| Charging Overcurrent Release Time | 60 | S |
| Discharge Overcurrent Protection Delay | 300 | S |
| Discharge Overcurrent Release Time | 60 | S |
| Short-circuit Protection Delay | 5 | µS |
| Charging Overtemperature Protection | 70 | °C |
| Charging Overtemperature Recovery | 60 | °C |
| Discharge Overtemperature Protection | 70 | °C |
| Discharge Overtemperature Recovery | 60 | °C |
| Charging Low Temperature Protection | -20 | °C |
| Charging Low Temperature Recovery | -10 | °C |
| MOS Overtemperature Protection | 100 | °C |
| MOS Overtemperature Recovery | 80 | °C |
5. Package Contents
The standard package includes the following items:
- 1 x JIKONG BMS Protection Board
- 1 x Sampling Line (long 70cm)
- 1 x NTC Temperature Sensor (long 40cm)
- 1 x Power Switch Button (long 50cm)
- Bolt screws (quantity varies by model)
- Exclusive packaging box
Figure 5.1: JIKONG BMS Package Contents
6. Setup and Installation
6.1. Wiring Instructions
The JIKONG BMS series is suitable for 3-8 or 8-24 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure all cables are connected correctly and securely.
- Connect all balance cables to the BMS.
- Insert the balance cable into the BMS connector.
- Connect the B-line (total negative electrode) and the P-line (total positive electrode) to the battery.
- Verify all connections with a multimeter before powering on.
Figure 6.1: Wiring Diagram for 24-String Cells
Figure 6.2: Wiring Diagram for 4-String Cells
6.2. Device Activation
Before powering on the protection board, double-check that the balance cables are properly connected and that the P- and B- lines are correctly wired. Ensure the protection board is securely fixed to the battery core. Failure to do so may lead to abnormal operation or even damage.
The protection board does not have a physical power-on switch. It is designed for charging activation. After the battery assembly is complete, connect the charger (with voltage 2V higher than battery voltage) to activate the BMS.
Alternatively, if you have an optional display screen and button, you can activate the BMS by inserting the cable into the display interface and pressing the button.
7. Operating Instructions
7.1. Mobile APP and PC Software
The JIKONG BMS features Bluetooth connectivity, allowing you to monitor and configure parameters via a mobile APP (Android/iOS) or PC software. Scan the QR code on the BMS panel to download the APP and access the detailed instruction manual.
Figure 7.1: Multi-Screen Display Options for BMS Data
7.2. Active Equalization
The active balancing function continuously works to equalize cell voltages. You can set the balance trigger pressure difference (mV) in the APP. The default balance current is 1A/2A. It is recommended that the balance current does not exceed 0.2C of the battery capacity. If not needed, this function can be turned off in the APP.
Figure 7.2: Active Balancing (Lossless Balancing) Principle
7.3. Protection Functions
The BMS provides various protection features:
- Overcharge Protection: Prevents cells from being overcharged. Configurable voltage thresholds in the APP.
- Discharge Undervoltage Protection: Prevents cells from being over-discharged. Configurable voltage thresholds and automatic shutdown voltage in the APP.
- Charge/Discharge Overcurrent Protection: Protects against excessive current during charging and discharging. Configurable current limits and delay times in the APP.
- Overtemperature Protection: Shuts down operation if battery temperature exceeds safe limits. Configurable thresholds in the APP.
- Low Temperature Protection: Prevents charging at dangerously low temperatures. Configurable thresholds in the APP.
- Short Circuit Protection: Automatically protects against short circuits. Delay and recovery times are configurable in the APP.
7.4. Optional Features
- GPS/Display Interface: Supports external GPS modules for battery location and display screens for real-time data viewing.
- Heating Function: For low-temperature environments, the BMS can activate a heating element to warm the battery. This function is optional and configurable via the APP.
- Battery Parallel Function: Supports parallel battery pack configurations, requiring a parallel module and specific APP settings.
- ACC Detection Function: Can be used to enable discharge and detect charger connection.
- Intelligent Sleep: Reduces BMS power consumption when idle. Can be enabled/disabled via the APP.
- Communication Functions (CAN/RS485): Supports various communication protocols for integration with other systems. Configurable via the APP.
Figure 7.3: Rich Interface Options for JIKONG BMS
8. Maintenance
- Regular Checks: Periodically inspect all wiring connections for tightness and corrosion.
- Software Updates: Keep the mobile APP and BMS firmware updated to ensure optimal performance and access to new features.
- Cleaning: Ensure the BMS unit is kept clean and free from dust and debris to maintain proper heat dissipation. The aluminum alloy shell is designed for superior heat dissipation.
- Environmental Protection: The BMS is designed to be dustproof, waterproof, anti-voltage, and anti-vibration. However, avoid exposing it to extreme conditions beyond its specified operating temperature and humidity ranges.
Figure 8.1: Aluminum Alloy Shell for Superior Heat Dissipation
Figure 8.2: Dustproof and Waterproof Design
9. Troubleshooting
- BMS Not Activating: Ensure the charger is connected and providing a voltage at least 2V higher than the battery voltage. Check all wiring connections as per the installation guide.
- Balancing Issues: Verify that the battery parameters (number of cells, capacity) are correctly set in the APP. Check the balance trigger differential pressure setting.
- Protection Triggered Frequently: Review the protection thresholds (overcharge, undervoltage, overcurrent, temperature) in the APP. Adjust them if necessary, ensuring they are within safe operating limits for your battery type.
- Communication Problems (Bluetooth/CAN/RS485): Ensure the APP is updated. Check the communication settings in the APP and verify physical connections for CAN/RS485. For Bluetooth, ensure the BMS is discoverable and paired correctly.
- Emergency Switch Use: If issues like over-temperature, over-discharge, overcharge, or cell imbalance occur, activating the emergency switch via the APP will force the BMS to operate for 30 minutes, allowing for temporary use.
For more detailed troubleshooting, refer to the comprehensive user manual PDF.
10. User Tips
- Optimal Balancing: For best results with active balancing, ensure your battery pack is initially well-matched. The active balancing feature works continuously to maintain cell consistency.
- APP Customization: Take advantage of the mobile APP to fine-tune protection parameters to match your specific battery chemistry and usage patterns.
- Low Temperature Operation: If operating in cold climates, consider utilizing the optional heating function to maintain battery performance and prevent damage.
- Wiring Accuracy: Double-check all wiring, especially balance leads, before initial power-up. Incorrect wiring is a common cause of issues.
11. Warranty and Support
JIKONG (Chengdu Jikong Technology Co., Ltd.) is committed to providing high-quality products and excellent customer service. For detailed warranty information and technical support, please refer to the official user manual PDF or contact JIKONG customer service directly.
JIKONG has mastered core technologies in active balance power battery management systems, including active balance, wireless transmission, functional safety, and capacity management. The company invests significantly in technology research and development to ensure product quality and innovation.
12. Appendix
For the most comprehensive and up-to-date information, including detailed wiring diagrams for all string configurations, advanced parameter settings, and troubleshooting guides, please refer to the official PDF user manual:
Download JIKONG JK BMS User Manual (PDF)
You can also download the mobile APP by scanning the QR code found on the BMS unit or in the PDF manual. The APP supports iOS and Android devices.
Figure 12.1: JIKONG BMS with QR Code for APP Download