1. Product Overview
The Attack Shark R1 is a high-performance tri-mode gaming mouse designed for precision and comfort. Featuring an ultralight 59g design, a PixArt PAW3311 flagship sensor, and versatile connectivity options, it's built to enhance your gaming and work experience.
Figure 1: Attack Shark R1 Gaming Mouse (Top and Bottom View)
Figure 2: Key Features of the R1 Mouse including PAW3311 Sensor, TTC Encoders, 59g Ultralight Design, Huano Switches, Broadcom BK3633 Chip, and 800-18000 DPI.
2. Setup Guide
2.1 Package Contents
- Attack Shark R1 Gaming Mouse
- USB-C Cable
- 2.4GHz USB Receiver
- User Manual (this document)
- Complimentary Non-Slip Sticker (optional application)
2.2 Connecting Your Mouse
The R1 mouse supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth 5.2. You can easily switch between these modes using the switch on the bottom of the mouse.
Video 1: Product overview demonstrating connection types, features, and customization.
2.2.1 2.4GHz Wireless Connection
- Locate the 2.4GHz USB receiver, usually stored in a compartment on the bottom of the mouse.
- Plug the 2.4GHz USB receiver into an available USB port on your computer.
- Slide the switch on the bottom of the mouse to the '2.4G' position.
- The mouse should connect automatically.
2.2.2 Bluetooth 5.2 Connection
- Slide the switch on the bottom of the mouse to the 'BT' position.
- On your computer or device, go to Bluetooth settings and enable Bluetooth.
- The mouse should appear as 'R1mouse' or similar in the list of available devices. Select it to pair.
- If prompted for a code, enter '0000' or refer to your device's Bluetooth pairing instructions.
2.2.3 Wired USB-C Connection
- Connect one end of the provided USB-C cable to the front port of the mouse.
- Connect the other end of the USB-C cable to an available USB port on your computer.
- The mouse will automatically switch to wired mode and begin charging.
2.3 Driver Software Installation
For advanced customization such as DPI adjustment, polling rate settings, and macro programming, install the official Attack Shark R1 driver software. This software allows you to personalize your mouse settings to optimize your gaming and work experience.
Figure 3: The R1 Macro Drive software interface for customizing buttons, DPI, polling rate, and managing profiles.
Refer to the Attack Shark website for the latest driver software download and installation instructions.
3. Operating Instructions
3.1 DPI Adjustment
The R1 mouse features a PixArt PAW3311 sensor with up to 18,000 DPI. You can adjust the DPI settings in 6 levels, either through the dedicated DPI cycle button on the mouse or via the driver software for more precise control.
Figure 4: The PAW3311 sensor supports up to 18000 DPI with 6 adjustable levels, 400 IPS movement speed, 40G acceleration, and 1000Hz return rate.
3.2 Button Functions
The R1 mouse has 6 programmable buttons:
- Left Click
- Right Click
- Middle Button (Scroll Wheel Click)
- Forward Button
- Backward Button
- DPI Cycle Button (default)
These buttons can be customized using the driver software to assign macros or other functions.
3.3 Polling Rate
The polling rate can be adjusted from 125Hz to 1000Hz via the driver software, allowing you to optimize responsiveness for different tasks or games.
3.4 Smart Sleep Function
The R1 mouse is equipped with an automatic sleep function to conserve battery life:
- Light Sleep: Enters immediately after a period of no operation. Move the mouse to wake up.
- Deep Sleep: Enters after 10 minutes of inactivity. Click any mouse button to wake up.
4. Maintenance
4.1 Charging the Battery
The R1 mouse has a 300mAh rechargeable battery. Connect the mouse to your computer using the provided USB-C cable to charge. A full charge takes approximately 2 hours and provides up to 65 hours of usage.
Figure 5: The R1 mouse offers approximately 65 hours of long-lasting power on a single charge.
4.2 Cleaning
To clean your mouse, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the mouse's internal components. Avoid using harsh chemicals or abrasive materials.
5. Troubleshooting
5.1 Mouse Not Responding
- Check Battery: Ensure the mouse is charged. Connect it via USB-C cable to charge.
- Check Connection: Verify the 2.4GHz receiver is securely plugged in, or Bluetooth is paired correctly. For wired mode, ensure the USB-C cable is firmly connected.
- Mode Switch: Confirm the switch on the bottom of the mouse is set to the correct connection mode (2.4G, BT, or wired).
- Wake from Sleep: If the mouse is in deep sleep, click any button to wake it up.
5.2 Connectivity Issues
- 2.4GHz Interference: Move the receiver closer to the mouse or try a different USB port. Avoid placing the receiver near other wireless devices that might cause interference.
- Bluetooth Pairing: If pairing fails, remove the mouse from your device's Bluetooth list and attempt to pair again. Ensure the mouse is in BT pairing mode (long press the BT mode switch if necessary).
5.3 Compatibility
The R1 mouse is widely compatible with Windows 7/8/10/11, Mac, and Android operating systems. While some users have inquired about Xbox compatibility, official support may vary. For optimal performance and customization, use with supported PC/Mac systems.
6. Specifications
Figure 6: Detailed diagram showing mouse dimensions and key specifications.
| Feature | Specification |
|---|---|
| Model | R1 |
| Connection | Wired (USB-C) / 2.4G Wireless / Bluetooth 5.2 |
| Sensor | PixArt PAW3311 Flagship Sensor |
| DPI | 800-18000 (6-level adjustable) |
| Polling Rate | 125-1000Hz |
| Movement Speed | 400 IPS |
| Accelerated Speed | 40G |
| Weight | 59g |
| Dimensions | 123.5 x 64 x 41mm |
| Number of Buttons | 6 |
| Switch Type | Huano White Dot Micro Switch |
| Switch Lifetime | 80 million clicks |
| Battery Capacity | 300mAh |
| Battery Life | Up to 65 hours |
| Hand Orientation | Both Hands (Ambidextrous design) |
| Colors Available | Black, White, Red |
7. Warranty and Support
Attack Shark provides customer support for any issues encountered with the R1 gaming mouse. If you experience problems, please contact our support staff. We aim to resolve your issue within one working day.
7.1 User Tips
- Customization: Utilize the driver software to fine-tune DPI, polling rate, and button macros for a personalized gaming experience.
- Non-Slip Stickers: The mouse comes with complimentary non-slip stickers. Apply them to enhance grip and comfort, especially during intense gaming sessions.
- Battery Management: For optimal battery longevity, avoid completely draining the battery frequently. Charge the mouse when the battery indicator shows low power.
