1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ANYTONE AT-5555 PLUS 10 Meter CB Radio. Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its performance and longevity.
2. Key Features
The ANYTONE AT-5555 PLUS is equipped with advanced features for optimal communication:
- Large LCD panel displaying frequency and various information.
- Dual-digital tube for channel display.
- EL technology for backlight.
- PA, CW, AM, FM, USB, LSB modes.
- 6 banks (A, B, C, D, E, F) with at least 60 individually programmable channels.
- Frequency Tuning Step options: 10Hz, 100Hz, 1KHz, or 10KHz.
- Multiple CLARIFIER Operating Modes.
- Flexible menu functions and PC programming software.
- ECHO Function.
- SQ, ASQ Function (FM and AM mode only).
- RF GAIN Adjustment.
- RF PWR Adjustment.
- SCAN Function.
- RB Function.
- NB/ANL Function (Noise Blanker/Automatic Noise Limiter).
- DW Dual-Watch Function.
- BEEP Voice Prompt.
- +10KHz Function.
- SWR, S/RF, DC Voltage display function.
- TOT (Time-Out Timer) function.
- HI-CUT Function.
- EMG CALL (Emergency Call).
- SWR Protection.
- Power Supplied Voltage Protection.
- Key-Lock Function.
- VOX function.
- CTCSS/DCS code.
- RX compander: noise blanker.
- Noise gate setting: mic noise adjustable.
- RX Noise Reduction (only AT-5555PLUS/N).
- Compatible with “electronic” and “dynamic” MIC types.
3. Package Contents
Please check the package for the following items:
- ANYTONE AT-5555 PLUS 10 Meter CB Radio Unit
- Microphone with UP/DN/AQ buttons
- DC Power Cable
- Mounting Bracket
- Mounting Screws and Washers
- Spare Fuse
4. Controls and Display
Familiarize yourself with the radio's front panel, microphone, and rear connections.
4.1 Front Panel Controls
- **FUNC:** Function button for accessing secondary features.
- **RB:** Roger Beep function.
- **NB/ANL:** Noise Blanker/Automatic Noise Limiter.
- **DW:** Dual Watch function.
- **SCAN:** Channel scanning.
- **+10KHZ:** Frequency shift by 10KHz.
- **LOCK SWR:** Lock SWR measurement.
- **LCD OFF EMG:** LCD display off / Emergency call.
- **SC.LIST:** Scan list management.
- **HI-CUT:** High-cut audio filter.
- **TOT:** Time-Out Timer.
- **S/RF:** S-meter/RF power display.
- **VOL->SQ:** Volume and Squelch control knob.
- **E-TONE:** Echo Tone control.
- **RF GAIN->RF PWR:** RF Gain and RF Power control knob.
- **BAND:** Band selector (A, B, C, D, E, F).
- **MODE:** Mode selector (AM, FM, USB, LSB, PA, CW).
- **CLARIFIER:** Fine frequency tuning.
- **CHANNEL:** Channel selector knob.
4.2 Microphone
The microphone features DN (Down), AQ (Auto Squelch), and UP (Up) buttons for convenient channel and function control.
4.3 Rear Panel Connections
- **ANT:** UHF, SO239 antenna connector.
- **POWER + -:** DC 13.8V power input.
- **EXT.SP:** External Speaker jack.
- **CW KEY:** CW Key jack.
5. Setup and Installation
Follow these steps to properly set up your AT-5555 PLUS radio:
5.1 Mounting the Radio
- Choose a stable and well-ventilated location for the radio.
- Use the provided mounting bracket and screws to secure the radio in your desired position (e.g., in a vehicle or on a desk).
5.2 Power Connection
- Ensure the radio is turned off before connecting power.
- Connect the supplied DC power cable to the POWER + - input on the rear of the radio.
- Connect the other end of the power cable to a stable 13.8V DC power source. Observe correct polarity (red to positive, black to negative).
5.3 Antenna Connection
- Connect a suitable 10-meter band antenna (UHF, SO239 type) to the ANT connector on the rear panel.
- Ensure the antenna is properly tuned for the 10-meter band to prevent damage to the radio.
5.4 Microphone Connection
- Plug the microphone connector into the dedicated jack on the front panel of the radio.
6. Operating Instructions
This section covers the basic operation of your AT-5555 PLUS radio.
6.1 Power On/Off and Volume
- Turn the VOL->SQ knob clockwise to power on the radio. The LCD display will light up.
- Continue turning the VOL->SQ knob to adjust the audio volume.
- To power off, turn the VOL->SQ knob counter-clockwise until it clicks.
6.2 Channel and Frequency Selection
- Use the CHANNEL knob to select your desired operating channel.
- Press the BAND button to cycle through the available frequency banks (A, B, C, D, E, F).
- For fine-tuning, use the CLARIFIER knob.
- To shift frequency by 10KHz, press the +10KHZ button.
6.3 Mode Selection
Press the MODE button to select your desired operating mode:
- **AM:** Amplitude Modulation
- **FM:** Frequency Modulation
- **USB:** Upper Sideband
- **LSB:** Lower Sideband
- **PA:** Public Address
- **CW:** Continuous Wave
6.4 Squelch Control
The Squelch function mutes weak signals to reduce background noise.
- Rotate the VOL->SQ knob counter-clockwise past the click to adjust the squelch level.
- For automatic squelch (ASQ) in FM/AM modes, press the AQ button on the microphone.
6.5 Transmitting and Receiving
- To transmit, press and hold the PTT (Push-To-Talk) button on the microphone. Speak clearly into the microphone.
- Release the PTT button to return to receive mode.
- Monitor the S/RF display for signal strength and RF power output.
6.6 Other Functions
- **SCAN:** Press the SCAN button to activate channel scanning.
- **DW (Dual Watch):** Press the DW button to monitor two channels alternately.
- **NB/ANL:** Press the NB/ANL button to activate noise reduction features.
- **ECHO:** Use the E-TONE knob to adjust the echo effect.
- **VOX:** Activate Voice Operated Transmit for hands-free operation.
7. Specifications
7.1 General Specifications
| Feature | Specification |
|---|---|
| Frequency Range | 28.000MHz-29.700MHz |
| Frequency Band | A/B/C/D/E/F |
| Channel | 60 channels (programmable) in each band |
| Frequency Control | Phase-Locked-Loop Synthesizer |
| Frequency Step | 10Hz, 100Hz, 1KHz, 10KHz |
| Frequency Tolerance | 0.005% |
| Frequency Stability | 0.001% |
| Temperature Range | -30°C to +50°C |
| Microphone | Plug-in dynamic; with push-to-talk /UP/DN/ASQ switch and coiled cord |
| Input Voltage | DC 13.8V normal, 15.9V max; 11.7V min |
| Transmit Current | AM full mod 6A, SSB 30W PEP output 9A |
| Receiver Current | Squelched 0.8A |
| Size | 28*25*6CM |
| Weight | 1.5KG |
| Antenna Connector | UHF, SO239 |
7.2 Transmitter Specifications
| Feature | Specification |
|---|---|
| Power Output | AM/CW: 1-12W (adjustable) FM: 1-40W (adjustable) USB/LSB: 1-35W (adjustable) |
| Modulation | High and low level class B Amplitude Modulation: AM Varied Capacitance Frequency Modulation: FM |
| Inter-modulation Distortion | SSB: 3rd order, more than -25dB; 5th order, more than -35dB |
| SSB Carrier Suppression | 55dB |
| Unwanted Sideband | 50dB |
7.3 Receiver Specifications
| Feature | Specification |
|---|---|
| Frequency Response | AM and FM: 450 to 2500Hz |
| Output impedance | 50ohms, unbalanced |
| Sensitivity | SSB: 0.25µV for 10dB (S+N)/N at greater than 1/2-watt of audio output. AM: 1.0µV for 10 dB (S+N)/N at greater than 1/2watt of audio output. FM: 1.0 µV for 20 dB (S+N)/N at greater than 1/2 watt of audio output. |
| Selectivity | AM/FM: 6dB@3KHz, 50dB @9KHz SSB: 6 dB@2.1KHz, 60dB @3.3KHz |
| Image Rejection | More than 65dB |
| IF Frequency | AM/FM: 10.695 MHz 1st IF, 455 KHz 2nd IF SSB: 10.695 MHz |
| Adjacent-Channel Rejection | 60dB AM/FM & 70 dB SSB |
| RF Gain Control | 45 dB adjustable for optimum signal reception |
| Automatic Gain Control (AGC) | Less than 10 dB change in audio output for inputs from 10 to 100,000 microvolt. |
| Squelch | Adjustable; threshold less than 0.5 µV. Automatic Squelch Control (only AM/FM) 0.5 µV |
| ANL | Switchable |
| Noise Blanker | RF type, effective on AM/FM and SSB |
| Audio Output Power | 4 watts into 8 ohms |
| Frequency Response | 300 to 2800 Hz |
| Built-in Speaker | 8 ohms, round. |
| External Speaker (Not Supplied) | 8 ohms; disables internal speaker when connected. |
8. Maintenance
To ensure optimal performance and longevity of your radio, follow these maintenance guidelines:
- **Cleaning:** Use a soft, dry cloth to clean the radio's exterior. Do not use abrasive cleaners or solvents.
- **Environment:** Keep the radio away from extreme temperatures, direct sunlight, dust, and moisture.
- **Connections:** Periodically check all connections (power, antenna, microphone) to ensure they are secure.
- **Ventilation:** Ensure the radio's ventilation slots are not obstructed to prevent overheating.
9. Troubleshooting
If you encounter issues with your radio, try the following basic troubleshooting steps:
- **No Power:** Check the power cable connection and the fuse. Ensure the power source is providing 13.8V DC.
- **No Audio:** Check the volume level and squelch setting. Ensure the microphone is properly connected. If an external speaker is used, ensure it is functional.
- **Cannot Transmit/Receive:** Verify antenna connection. Check the selected mode and channel. Ensure the SWR is within acceptable limits.
- **Poor Audio Quality:** Adjust RF Gain and Squelch. Try activating NB/ANL functions.
For more complex issues, please contact customer support.
10. User Tips
No specific user tips from reviews or Q&A were provided for this product.
11. Warranty and Support
The ANYTONE AT-5555 PLUS radio comes with an 18-month warranty. Accessories are covered by a 6-month warranty. If you find any defects, please contact the seller within 3 days of receipt.
11.1 Contact Information
For support or inquiries, you may contact:
- WhatsApp: +86 15211026756
- Email: ken6833@qxdz.cn
- Website: www.anytone.net