Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your EASWEL Foot Control Pedal, Model 87532. This electric pedal is designed to provide variable speed control for compatible sewing machine motors, enhancing your sewing experience.
Setup
Before using your foot control pedal, ensure your sewing machine is turned off and unplugged from the power source.
- Locate the foot pedal input jack on your sewing machine. This is typically found near the power cord connection.
- Identify the connector on the EASWEL Foot Control Pedal's power cable. It is a 3.5mm male plug.
- Carefully insert the pedal's 3.5mm male plug into the corresponding input jack on your sewing machine. Ensure a snug and secure connection.
- Place the foot pedal on the floor in a comfortable position where you can easily operate it with your foot.
- Plug your sewing machine's power cord into a suitable electrical outlet.
Operating Instructions
The foot control pedal allows you to regulate the speed of your sewing machine's motor. Follow these steps for operation:
- Ensure the foot pedal is properly connected to your sewing machine and the machine is powered on.
- Gently press down on the foot pedal with your foot. The more pressure you apply, the faster the sewing machine will operate.
- To slow down the machine, gradually release pressure on the pedal.
- To stop the machine, completely remove your foot from the pedal.
Practice with scrap fabric to get a feel for the speed control before working on your main project.
Maintenance
To ensure the longevity and optimal performance of your EASWEL Foot Control Pedal, follow these simple maintenance guidelines:
- Keep the pedal clean and free from dust, lint, and debris. Use a soft, dry cloth to wipe its surface.
- Avoid spilling liquids on the pedal. If accidental spillage occurs, unplug the sewing machine immediately and allow the pedal to dry completely before reuse.
- Store the pedal in a dry place, away from extreme temperatures and direct sunlight, when not in use.
- Do not attempt to open the pedal casing, as this may void any potential warranty and could expose you to electrical hazards.
Troubleshooting
If you encounter issues with your foot control pedal, try the following troubleshooting steps:
- Pedal not responding:
- Ensure the sewing machine is properly plugged into a working electrical outlet and turned on.
- Verify that the foot pedal's connector is securely inserted into the sewing machine's input jack.
- Check the power cable for any visible damage or kinks.
- Inconsistent speed control:
- Ensure the pedal is clean and free from obstructions that might hinder its movement.
- Confirm that the pedal is fully depressed and released to test the full range of speed.
If problems persist after attempting these steps, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Part Number | 87532 |
| Brand | EASWEL |
| Origin | Mainland China |
| Connector Type | 3.5mm Male Plug |
| Connector Length | Approximately 14mm |
| Plastic Base Diameter | Approximately 7.40mm |
| Electrical Rating | DC 15V Max 3mA |
Compatible Sewing Machine Models:
This foot control pedal is compatible with a wide range of home sewing machines, including but not limited to:
Babylock:
- BLQK SASHIKO
- BLQK2 SASHIKO
- BLES8 Ovation
Bernette:
- B37
- B38
Bernina:
- 2000DCE
- 2500DCET
Euro Pro:
- 9101, 9105, 9106, 9110, 9120, 9125, 9130, 9136
Jaguar:
- 160
Juki:
- HZL-K65
- HZL-K85
Viking:
- H|Class 600E
Singer:
- 1+, 150 Futura, 1500 IZEK, 160 Experience, 160 Limited Edition, 160 Anniversary, 2009 Athena, 250 Futura, 3305, 3311, 3400, 350 Futura, 5400 Brilliance, 5400 New Style, 5500 Fashion Mate, 5625, 6160 Brilliance, 6180 Brilliance, 6199 Brilliance, 6660, 6669, 6680, 6699, 70, 7256 Fashion Mate, 7258 Stylist, 7285Q Patchwork, 7412, 7422, 7424, 7425, 7426, 7427, 7428, 7429, 7430, 7431, 7432, 7433, 7434, 7435, 7436 Ingenuity, 7437, 7438, 7439, 7440, 7441, 7442, 7442CL, 7443, 7444, 7445, 7446, 7447, 7448, 7449, 7450, 7451, 7452, 7453, 7454, 7455, 7456, 7457, 7458, 7459, 7460, 7461, 7462, 7463, 7464, 7465, 7466, 7467, 7468, 7469, 7469Q, 7470 Companion, 7563, 8090, 8500Q, 8763 Curvy, 8768 Heritage, 8770 Curvy, 8780 Curvy, 90S, 9910, 9920, 9940, 9960 Quantum Stylist, 9970, CE-100 Futura, CE-150, CE-200, CE-250, CE-350, Diva 28, Experience 160, FQ4, Futura 5, Futura Quartet, One, S800, S900, SES1000, SES2000, SEQS6000, SEQS6700, SQ9970, Quantum DSX, Quantum DSX II, Quantum LE, Quantum XL1000, Quantum XL100, Quantum XL150, Quantum XL3400, Quantum XL5000, Quantum XL6000, SX100, XL400, XL420, XL550, XL580
User Tips
While no specific user tips were provided, general advice for foot control pedals includes:
- Foot Placement: Position your foot comfortably on the pedal to allow for smooth and precise control.
- Gradual Pressure: Apply pressure gradually to avoid sudden bursts of speed, especially when starting a new seam.
- Compatibility Check: Always double-check the compatibility list for your specific sewing machine model to ensure proper function and avoid damage.
Warranty and Support
For any questions regarding your EASWEL Foot Control Pedal, including warranty information or technical support, please contact the seller or manufacturer directly. Ensure you have your product model (87532) and any purchase details available when seeking assistance.