Introduction
This manual provides comprehensive instructions for the K&F Concept Square Filter Holder System NANO-X Pro. It covers the setup, operation, maintenance, and specifications of the filter holder, 95mm CPL filter, and included adapter rings. Please read this manual carefully before using the product to ensure proper handling and optimal performance.

Figure 1: K&F Concept Square Filter Holder System with 95mm CPL filter and adapter rings.
Package Contents
Verify that all items are present in your package:
- 1 x Square Filter Holder
- 1 x 95mm CPL Filter (Circular Polarizer)
- 4 x Adapter Rings (67mm, 72mm, 77mm, 82mm)
- 1 x Instruction Manual

Figure 2: Contents of the K&F Concept Square Filter Holder System NANO-X Pro kit.
Setup
Follow these steps to set up your filter system:
- Attach Adapter Ring: Select the appropriate adapter ring (67mm, 72mm, 77mm, or 82mm) that matches your camera lens thread size. Screw the adapter ring onto the front of your lens.
- Mount Filter Holder: Align the square filter holder with the adapter ring and securely attach it. The quick installation buckle allows for easy and secure mounting.
- Insert CPL Filter: The 95mm CPL filter is designed for rear insertion into the filter holder. Ensure the CPL filter is inserted correctly, facing the photographer, to avoid the "CPL ERROR" indicator. If the indicator shows, remove and reinsert the CPL filter in the opposite direction.

Figure 3: Correct and incorrect CPL filter insertion, indicated by the 'CPL ERROR' warning.
- Stack Square Filters (Optional): The system allows for stacking up to two square filters in addition to the CPL filter. Gently slide the square filters into the designated slots on the holder. Handle tabs enable easy positioning without touching the filter surface. Lint gaskets are integrated to prevent light leakage.

Figure 4: Stacking two square filters in the holder.
Operating Instructions
Once the filter system is set up, you can begin using it:
- Adjusting the CPL Filter: Use the CPL adjusting wheel located on the side of the filter holder to rotate the CPL filter. This allows you to control the polarization effect, reducing reflections and enhancing colors.
- CPL Filter Cover: The filter holder features a cover that can be lifted. When lifted, the CPL filter will rise, preventing light leakage when not in use or when you need to quickly remove the CPL effect without disassembling the entire system.

Figure 5: CPL filter in the lifted position.

Figure 6: CPL filter in the closed position, ready for shooting.
- Locking Knob: The locking knob secures the filter holder in place on the adapter ring, preventing accidental rotation or detachment.
- Vignetting Prevention: The ultra-slim frame (12mm thickness) and large 91mm clear aperture are designed to effectively reduce vignetting, especially when using ultra-wide-angle lenses.

Figure 7: Detailed view of the filter holder's operational features.
Maintenance
To ensure the longevity and optimal performance of your K&F Concept filter system, follow these maintenance guidelines:
- Cleaning Filters: The CPL filter features a 36-layer nano-coating, making it waterproof, anti-scratch, and anti-greasy. To clean, gently wipe the filter surface with a clean, soft microfiber cloth. For stubborn smudges, use a specialized lens cleaning solution. Avoid abrasive materials or harsh chemicals.
- Cleaning Holder: Wipe the filter holder with a soft, dry cloth to remove dust and debris.
- Storage: When not in use, store the filters and holder in their protective case to prevent dust accumulation and accidental damage.
Troubleshooting
- "CPL ERROR" Indicator: If the "CPL ERROR" message appears, it indicates that the CPL filter is inserted incorrectly (inverted). Remove the CPL filter and reinsert it so that it faces the photographer. Refer to Figure 3 for visual guidance.
- Vignetting (Dark Corners): While the system is designed to minimize vignetting, especially with wide-angle lenses, extreme wide-angle lenses or certain lens-filter combinations might still exhibit slight vignetting. Ensure the filter holder is correctly seated and no other accessories are obstructing the view.
- Light Leakage: The system is designed with lint gaskets and a CPL filter cover to prevent light leakage. Ensure the CPL filter cover is closed when the CPL is in use, and that square filters are fully inserted into their slots.
Specifications
| Feature | Specification |
|---|---|
| Brand | K&F CONCEPT |
| Model Number | Square Filter Holder CPL Filter NANO-X Pro |
| Type | CPL Filter System (can accommodate Neutral Density Filters) |
| CPL Filter Caliber | 95mm |
| CPL Filter Fastening | Insert (Rear) |
| Filter Holder Thickness | 12mm |
| Clear Aperture | 91mm |
| Filter Coating | 36-layer Nano-coating (Waterproof, Anti-scratch, Anti-greasy) |
| Material | Optical Glass (CPL Filter) |
| Adapter Rings Included | 67mm, 72mm, 77mm, 82mm |
| Filter Capacity | 1 x 95mm CPL filter, 2 x Square filters |

Figure 8: Dimensions and design features for preventing vignetting.
User Tips
- Check Compatibility: Always ensure you select the correct adapter ring size for your lens. If you have a wide-angle lens, especially one like a 14mm, verify that the adapter ring and filter holder combination does not cause mechanical vignetting before shooting.
- Secure Installation: Double-check that the filter holder is securely locked onto the adapter ring to prevent accidental detachment during use.
- CPL Orientation: Pay attention to the CPL filter's orientation during installation to avoid the "CPL ERROR" and ensure proper functionality.
Warranty and Support
For warranty information, technical support, or any inquiries regarding your K&F Concept product, please refer to the official K&F Concept website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.