1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CARABC Wireless Apple CarPlay and Android Auto Module. This module is designed to integrate seamlessly with your vehicle's existing infotainment system, offering enhanced connectivity and functionality.
Note: This product is not compatible with cars equipped with a 360-degree camera system.
Functional Statement
The module integrates with your car's system to provide:
- CarPlay / Android Auto: Seamless integration with iPhone and Android devices for voice commands, phone calls, information, navigation, and music. Supports both wireless and wired connections.
- Reversing Video Input: Smart module decodes video for rear-view camera input.
- Mirroring: Supports wired and wireless screen mirroring for iPhone and Android phones.
- USB Video Playback: Automatic media playback from a USB drive for video and audio.
2. Specifications
Product Information
| Attribute | Value |
|---|---|
| Brand | CARABC |
| Product Size | 128*84*25mm |
| Applicable Model | TOYOTA (Touch 2 / Entune 2.0) |
| Main Function | CarPlay & Android Auto |
| Phone OS System Suitable | iOS & Android |
Technical Specifications
| Parameter | Value |
|---|---|
| Operating Voltage | 5V |
| Operating Temperature | -30℃ to +75℃ |
| Power Consumption | 1A (rated), 3A (Max) |
| Quiescent Current | Less than 3mA |
| Charging Current | ≤2A (If USB charging current >1A, host activates circuit protection to control current below 1.5A to prevent damage) |
| Stored Temperature | -30℃ to +85℃ |
| Environment Humidity | ≤98% (at 45℃), 65±5% (rated) |
| Shutdown Current | 300mA (Clock is on) |
3. Setup and Installation
Before installation, ensure your vehicle is turned off and the battery is disconnected to prevent electrical damage.
3.1 Connection Diagram
Refer to the diagram below for proper wiring connections. Each numbered point corresponds to a specific connection.
- Connect with Original Car's Main Unit - 24PIN
- Connect with Original Car's Main Unit - 10PIN
- Connect with Original Car's Main Unit - 28PIN
- Connect with Original Car's Plug - 28PIN
- Connect with Original Car's Plug - 10PIN
- Connect with Original Car's Plug - 24PIN
- Forward Looking Input
- Camera Power Supply
- GND (Ground)
- USB Cable
- WIFI Antenna
3.2 Vehicle Dialing Table (DIP Switch Settings)
Configure the DIP switches on the module according to your vehicle's head unit type.
| Model | Dialing (Switch Position) | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| Fujitsu Panasonic | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
| Pioneer | OFF | OFF | OFF | OFF | ON | OFF | OFF | OFF |
Default: All switches are OFF.
- For Panasonic Fujitsu mainframes: All switches OFF.
- For Pioneer mainframes: Switch 5 ON, others OFF.
3.3 Compatible Model List
This product is compatible with the following Toyota vehicles that use the Touch2 & Entune2.0 system and do NOT have a 360 camera/Bird's Eye View system.
- 2014-2018 Toyota RAV4 (Not compatible with 86100-42241 radio)
- 2014-2019 Toyota 4Runner (Only fits Panasonic & Fujitsu; Pioneer is not supported)
- 2014-2019 Toyota Corolla (Not compatible with 86140-02540 Fujitsu with 7" display)
- 2014-2019 Toyota Prius (Not compatible with Prius w/ 11.6" screen equipped models)
- 2014-2019 Toyota Highlander
- 2016-2019 Toyota Prius c
- 2016-2017 Toyota Prius v
- 2015-2017 Toyota Sienna
- 2014-2019 Toyota Tacoma
- 2014-2018 Toyota Yaris
- 2016-2019 Toyota C-HR
- 2015-2017 Toyota Alphard
- 2014-2019 Toyota Avensis
- 2015-2019 Toyota Hilux
- 2015-2018 Toyota Avalon
- 2014-2019 Toyota Sequoia
- 2014-2019 Toyota Tundra
- 2017-2019 Toyota 86
- 2014-2019 Toyota Verso
- 2014-2019 Toyota Land Cruiser
- 2014-2017 Toyota Camry
- 2014-2019 Toyota Auris
- 2015-2019 Toyota Fortuner
4. Operation
4.1 Switching to CarPlay System
There are three methods to switch to the CarPlay interface:
- From the original car screen: First, click the "FM" icon, then click the "AUX" icon to enter.
- From the steering wheel: Long press the voice button.
- If no voice button: Press the "MODE" button.
4.2 Control Key Operation
The module supports control via original car buttons and touch screen.
Original Car Button Control:
- Volume +
- Volume -
- Previous song
- Next song
- Answer the phone
- Hang up the phone
- Short press to wake up Siri; Long press 2s to switch CarPlay system.
Touch Screen Control:
The module fully supports touch screen operation for smooth and lag-free interaction with CarPlay and Android Auto interfaces.
4.3 Wireless CarPlay Connection
To connect your iPhone wirelessly to CarPlay:
- Step 1: On the module's interface, select "Bluetooth".
- Step 2: On your phone, check for a Bluetooth device named "CAR-BT-xxxx".
- Step 3: Turn on Wi-Fi on your phone and keep it on. Then, return to Bluetooth settings and connect to "CAR-BT-xxxx".
- Step 4: Select the Bluetooth device name "CAR-BT-xxxx" and pair. When prompted, choose "Use CarPlay".
Wired Connection Method: Connect your phone to the module using a USB cable. A pop-up window will appear; click "Use CarPlay".
4.4 Apple Wireless Screen Mirroring
To mirror your iPhone screen wirelessly:
- Step 1: On the module's interface, select "Airplay".
- Step 2: On your iPhone, go to Wi-Fi settings and select the "Wireless LAN" option. Search for "CAR-WIFI-XXX" and connect. The password is
66668888. - Step 3: After successful Wi-Fi connection, return to your iPhone's main interface, open the Control Center (shortcut menu), select "Screen Mirroring", and turn it on.
- Step 4: Select "Airplay" from the available devices to complete wireless screen mirroring.
4.5 Wireless Android Auto Connection
To connect your Android phone wirelessly to Android Auto:
- Step 1: On the module's interface, select "Bluetooth".
- Step 2: On your phone, check for a Bluetooth device named "CAR-BT-xxxx".
- Step 3: Click on the Bluetooth name "CAR-BT-xxxx". A pairing request will pop up; click "Pairing". After successful pairing, your phone will prompt to enable Android Auto; confirm it.
- Step 4: Turn on the Android Auto app on your mobile phone, and the system will connect automatically.
Wired Connection Method: Connect your phone to the module using a USB cable. A pop-up window will appear; click "Allow".
4.6 Android Wireless Screen Mirroring
To mirror your Android phone screen wirelessly:
- Step 1: Scan the QR code displayed on the module's "Auto Link" screen using your Android phone's browser to download the Auto Link app.
- Step 2: In the module's settings page, switch "WifiAutoLink" to "ON".
- Step 3: Open the downloaded Auto Link app on your phone. Search for "WiFiAutolink-xxx" and connect. Click "START NOW" on the phone prompt box.
- Step 4: After the Auto Link connection, touch reverse control and media sound will be enabled. Connect to Bluetooth for media sound.
5. Maintenance
To ensure the longevity and optimal performance of your CARABC module, follow these general maintenance guidelines:
- Keep the module and its connections dry and free from moisture.
- Clean the module's exterior gently with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Ensure all cables are securely connected and not pinched or strained.
- Avoid exposing the module to extreme temperatures or direct sunlight for prolonged periods.
6. Troubleshooting
6.1 Echo Correction (AEC Delay)
If you experience echo during calls, you can perform an echo correction:
- Navigate to: Settings > Audio > AEC Delay.
- Click the "Start Auto AEC" button.
- During the correction process, ensure the car is quiet.
- Set the volume to a moderate position.
- Click "start" to initiate the echo cancellation.
6.2 Common Issues & Solutions
- No display after installation:
- Check all power and video connections as per the connection diagram.
- Ensure the correct DIP switch settings are applied for your car's head unit.
- Verify that the car's original system is Touch2 or Entune2.0.
- CarPlay/Android Auto not connecting wirelessly:
- Ensure Bluetooth and Wi-Fi are enabled on your phone.
- Confirm you are connecting to the correct "CAR-BT-xxxx" and "CAR-WIFI-XXX" networks.
- Try restarting both your phone and the car's infotainment system.
- Screen Mirroring issues:
- For Apple devices, ensure Wi-Fi is connected to "CAR-WIFI-XXX" and Airplay is selected.
- For Android devices, ensure the "Auto Link" app is installed and "WifiAutoLink" is enabled in settings.
- Check for any firewall or security settings on your phone that might block mirroring.
- Audio problems (no sound, distorted sound):
- Verify the car's audio input is set to AUX.
- Check volume levels on both the car's system and your phone.
- Ensure Bluetooth is properly connected for media audio.
7. User Tips
- Compatibility Check: Always double-check your Toyota model and infotainment system version (Touch2 or Entune2.0) before installation. Pay close attention to specific radio model exclusions mentioned in the compatible model list.
- Screen Differentiation: If you have a Prius 2018, ensure you can differentiate your screen type as some models might not be compatible.
- Firmware Updates: Regularly check the manufacturer's website or contact support for any available firmware updates to ensure optimal performance and compatibility with the latest phone OS versions.
- USB Media: For best performance with USB media, use a high-quality USB drive formatted to FAT32.
- Voice Control: Familiarize yourself with voice commands for Siri or Google Assistant to minimize distractions while driving.
8. Warranty and Support
All CARABC products come with a one-year warranty from the date of purchase. We ensure our products undergo strict functional and performance tests before leaving the factory.
Warranty Exclusions
The following conditions are not covered under the free warranty service:
- Damage occurring after the free warranty period, including scratches, dirt, or deformation.
- Inconsistent warranty card and purchase certificate with the product model, or altered marks.
- Unclear or missing barcode on the host machine body.
- Damage resulting from improper use, maintenance, repair, or modification not in accordance with the product manual.
- Damage due to force majeure events (e.g., fire, flood, traffic accident, lightning, earthquake).
Customer Support
For any assistance, installation issues, or other problems, please contact us:
- WhatsApp: +86 13794490273 (WhatsApp Service Time: GMT+8)
- User Manual (PDF): For a downloadable version of the item guides and documents, please refer to the official PDF manual available at this link.
