Introduction
The Ultenic TS1 is an advanced robot vacuum cleaner designed to provide comprehensive and effortless floor cleaning. Featuring a self-emptying station, powerful dual-spin mopping, and intelligent navigation, the TS1 ensures a spotless home with minimal intervention. This manual provides essential information for setting up, operating, and maintaining your Ultenic TS1 to ensure optimal performance and longevity.
Package Contents
Before you begin, please check the package contents to ensure all items are present:

Figure 1: Ultenic TS1 Package Contents
- Ultenic TS1 Robot Vacuum Cleaner
- Suction Station
- Remote Control
- Wipe x 2
- Wipe Holder x 2
- Side Brush
- HEPA Filter
- Cleaning Brush
- Dust Bag
- User Manual (this document)
Setup
1. Charging Station Placement
Place the Suction Station on a hard, level surface against a wall. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the station for the robot to navigate freely. Plug the power cord into a wall outlet.

Figure 2: Robot and Suction Station Setup
2. Initial Charging
Place the Ultenic TS1 robot onto the Suction Station. Ensure the charging contacts on the robot align with those on the station. The robot will begin charging automatically. For the first use, allow the robot to charge completely (approximately 5 hours) before operation.

Figure 3: Robot Recharging
3. App Connection
Download the Ultenic App from your smartphone's app store. Follow the in-app instructions to connect your TS1 robot vacuum cleaner via Wi-Fi or Bluetooth. The app allows for advanced control and customization of cleaning schedules and settings.

Figure 4: App Control Interface
Operating
1. Cleaning Modes
The Ultenic TS1 offers versatile cleaning modes:
- Vacuum Mode: For dry debris and dust.
- Mop Mode: For wet cleaning hard floors.
- Vacuum & Mop 2-in-1: Simultaneously vacuums and mops for comprehensive cleaning.

Figure 5: Vacuum and Mop 2-in-1 Function
2. App Control
Use the Ultenic App to:
- Start/stop cleaning.
- Select cleaning modes and suction levels.
- Set cleaning schedules.
- View cleaning maps and history.
- Define no-go zones and virtual walls.
- Customize cleaning for specific rooms or areas.
3. Voice Control
The TS1 supports smart speaker voice control. Connect your robot to compatible voice assistants (e.g., Alexa, Google Assistant) to initiate cleaning commands hands-free.

Figure 6: Voice Control Example
4. Multi-Floor Mapping
The TS1 can effortlessly map and save up to multiple maps for different levels of your house. You can customize cleaning routines for each floor using the Ultenic App.

Figure 7: Multi-Floor Mapping
5. Obstacle Avoidance and Navigation
Equipped with NaviFree Intelligence Navigation and a built-in laser camera, the TS1 accurately identifies obstacles and scans a real-time map of your home, improving cleaning efficiency and avoiding collisions.

Figure 8: Obstacle Avoidance
6. Automatic Carpet Boost
When the TS1 detects carpet, it automatically increases suction power to the maximum for deeper cleaning in vacuum mode. In mop mode, it intelligently detours around carpets to prevent wetting them.
7. Recharging and Resuming
If the battery runs low during a cleaning cycle, the TS1 will automatically return to its Suction Station to recharge. Once fully charged, it will resume cleaning from where it left off.
Maintenance
Regular maintenance ensures your Ultenic TS1 operates efficiently and extends its lifespan.
1. Self-Emptying Station and Dust Bag
The self-emptying station automatically transfers collected debris from the robot's dust box into a 3L dust bag. The station also features UV light for sterilization.

Figure 9: Self-Emptying Station
- Dust Bag Replacement: Replace the 3L dust bag in the Suction Station when it is full. The frequency depends on usage and household debris levels.
2. Mop Pads
The TS1 uses dual-spin mop pads for effective wet cleaning.
- Cleaning: Remove the mop pads from their holders after each mopping session. Wash them thoroughly with water and mild detergent. Allow them to air dry completely before reattaching.
- Replacement: Replace mop pads every 1-3 months, or when they show signs of wear and tear.

Figure 10: Dual-Spin Mop Pads
3. HEPA Filter
The HEPA filter helps trap fine dust and allergens.
- Cleaning: Tap the filter gently to remove loose debris. Do not wash the HEPA filter with water.
- Replacement: Replace the HEPA filter every 3-6 months, or as needed.
4. Side Brush
The side brush sweeps debris into the robot's path.
- Cleaning: Remove any hair or debris tangled around the side brush.
- Replacement: Replace the side brush if bristles are worn or damaged.
5. Cleaning Brush
Use the provided cleaning brush to remove hair and debris from the main brush and other components.
Troubleshooting
If you encounter issues with your Ultenic TS1, refer to the following common problems and solutions:
- Robot not charging: Ensure the charging contacts on both the robot and the station are clean and free of debris. Verify the power cord is securely plugged into the wall outlet.
- Robot stuck or lost: Clear any obstacles or tangled wires from the robot's path. If the robot is lost, manually place it back on the charging station or restart it.
- Poor cleaning performance: Check and clean the main brush, side brush, and dust box. Ensure the HEPA filter is not clogged. If mopping, ensure mop pads are clean and water tank is filled.
- App connectivity issues: Ensure your Wi-Fi network is 2.4GHz. Restart your router, robot, and smartphone. Re-pair the robot with the app if necessary.
- Excessive noise: Check for any foreign objects caught in the brushes or wheels. Clean the dust box and filter.
For persistent issues, consult the Ultenic App for further diagnostics or contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Rated Power | 35W |
| Voltage | 14.4V |
| Suction | Max. 3000Pa |
| Runtime | Max 120 Mins |
| Charging Time | ≤5h |
| Noise Level | Powerful gear: ≤73dB, Standard gear: ≤68dB, Quiet gear: ≤65dB |
| Obstacle/Hall Crossing Height | ≤5mm |
| Climbing Angle | ≤13 Degrees |
| Water Tank Type | Electronically controlled integrated dust box vibration water tank |
| Dust Box Capacity | 200ml |
| Water Tank Capacity | 235ml |
| Carpet Boost | Supported |
| Wet Mop Avoidance Carpet | Supported (ultrasonic testing) |
| Resume from Breakpoint | Supported |
| Dust Full Tips | Not Supported |
| APP Control | Supported |
| Smart Speaker Voice Control | Supported |
| Operating Environment Range | Temperature: 0-40°C; Humidity: ≤75% |
| Motor Type | Brushless motor |
| Battery | 3200mAh |
| WiFi Module | 2.4G |
| Laser Sensor | Point Lidar |
| Feature | Specification |
|---|---|
| Rated Power | 1050W |
| Rated Input | 220-240V AC, 50/60Hz |
| Rated Output | 1A |
| Suction Power | 22KPa |
| Dust Bag Capacity | 3L |
User Tips
- For best mopping results, ensure the mop pads are damp before starting a mopping cycle.
- Regularly check and clear any small objects, cables, or loose rugs that might obstruct the robot's path to prevent it from getting stuck.
- Utilize the Ultenic App's mapping features to set specific cleaning zones or no-go areas for tailored cleaning.
- Clean the robot's sensors periodically with a dry cloth to maintain optimal navigation and obstacle avoidance.
Warranty and Support
The Ultenic TS1 Robot Vacuum Cleaner comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Ultenic customer service through their official website or the contact information provided in your warranty documentation.