1. Introduction
This manual provides detailed instructions for the QIACHIP KR8001mini-4 Universal Wireless Remote Control Switch Receiver. This compact and versatile RF receiver module is designed for various remote control applications, including home security systems, electric doors, windows, LED lighting, and automotive anti-theft products. It operates on a 433MHz frequency and supports DC 3.7V-24V input, with a maximum load capacity of 2A (40W for general loads, 12W for motor-type applications).
Figure 1: QIACHIP KR8001mini-4 Receiver Modules
2. Specifications
| Feature | Specification |
|---|---|
| Model Number | KR8001mini-4 |
| Working Voltage | DC 3.7V-24V |
| Maximum Load Current | 2A |
| Maximum Load Power (General) | 40W |
| Maximum Load Power (Motor Type) | 12W |
| Static Current | 3.6mA-7mA |
| Working Frequency | 433MHz |
| Reception Sensitivity | ≥ -107dBm |
| Modulation Mode | ASK (Superheterodyne) |
| Number of Stored Remote Controls | ≤ 10 |
| Working Modes | Momentary, Toggle, Latching Mode |
| Learning Style | Learning Button |
| Working Temperature | -40°C to 80°C (-40°F to 176°F) |
| Appearance Size (L×W×H) | 26mm x 13mm x 1mm |
| Working Distance | 20 Meters above in open space. |
| Certifications | CE, FCC, RoHS |
Figure 2: Receiver Dimensions
Figure 3: Receiver Pinout
Figure 4: Product Certifications
3. Wiring and Installation
Ensure the power supply is disconnected before making any wiring connections. Refer to the diagrams below for typical wiring configurations.
Figure 5: Wiring for LED Light Control
Figure 6: Wiring for Electric Lock Control
Key Terminals:
- DC+ / DC-: Power input (DC 3.7V-24V).
- NO (Normally Open): Output terminal, open when relay is off.
- COM (Common): Common output terminal.
- NC (Normally Closed): Output terminal, closed when relay is off.
For most applications, you will connect your load between COM and NO (for normally open operation) or COM and NC (for normally closed operation).
4. Operating Modes and Setup
The receiver supports three main working modes: Momentary, Toggle, and Latching. It also features timed delay functions. Follow the instructions below to set up your desired mode.
Video 1: Demonstration of Learning Modes and Delay Functions
4.1. Learning the Code (Pairing Remote)
The receiver has a learning button (often labeled "Learning buttons" or "Learn button" on the board, next to the LED indicator) to pair with a 433MHz remote control using the 1527 learning code protocol.
Momentary Mode Setup
In Momentary mode, the relay connects only while the remote button is pressed and disconnects upon release.
- Press the learning button on the receiver once. The LED indicator will turn off, indicating it's in learning state.
- Press the desired button on your remote control. The LED on the receiver board will flash and then turn off.
- After approximately 3 seconds, the LED indicator will turn on again, confirming successful learning.
(Refer to Video 1, 0:00 - 0:10 for visual guide)
Toggle Mode Setup
In Toggle mode, pressing the remote button once connects the relay, and pressing it again disconnects it.
- Press the learning button on the receiver twice. The LED will turn off, indicating it's in learning state.
- Press the desired button on your remote control. The LED on the receiver board will flash and then turn off.
- After approximately 3 seconds, the LED indicator will turn on again, confirming successful learning.
(Refer to Video 1, 0:10 - 0:22 for visual guide)
Latching Mode Setup
In Latching mode, one remote button turns the relay ON, and another remote button turns it OFF. You need to learn two different buttons for this mode.
- Press the learning button on the receiver three times. The LED indicator will turn off, indicating it's in learning state.
- Press the remote button you want to assign as "ON" (e.g., Button A). The LED will flash 5 times.
- Press the remote button you want to assign as "OFF" (e.g., Button B). The LED will flash 5 times.
- After approximately 3 seconds, the LED indicator will turn on again, confirming successful learning.
(Refer to Video 1, 0:22 - 0:34 for visual guide)
4.2. Timed Delay Function Setup
The receiver can be configured to automatically turn off after a set delay. This function is typically used with a single remote button.
- 5-second Delay: Press the learning button on the receiver 4 times. Then press the remote button. The relay will turn on and automatically turn off after 5 seconds.
- 10-second Delay: Press the learning button on the receiver 5 times. Then press the remote button. The relay will turn on and automatically turn off after 10 seconds.
- 15-second Delay: Press the learning button on the receiver 6 times. Then press the remote button. The relay will turn on and automatically turn off after 15 seconds.
- 20-second Delay: Press the learning button on the receiver 7 times. Then press the remote button. The relay will turn on and automatically turn off after 20 seconds.
(Refer to Video 1, 0:34 - 2:18 for visual guide on delay functions)
4.3. Clear Code (Reset Receiver)
To clear all learned remote controls from the receiver's memory:
- Press the learning button on the module 8 times continuously.
- The LED light will flash seven times and then go out, indicating that all codes have been successfully cleared.
(Refer to Video 1, 2:18 - 2:32 for visual guide)
5. Maintenance
The QIACHIP KR8001mini-4 receiver is designed for durability and low maintenance. To ensure optimal performance and longevity:
- Keep the module clean and free from dust and debris.
- Avoid exposing the module to extreme temperatures, high humidity, or direct water contact.
- Do not attempt to modify the internal components of the module, as this may void any implied warranty and could lead to malfunction.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
6. Troubleshooting
- Receiver not responding to remote:
- Ensure the receiver is powered correctly (DC 3.7V-24V).
- Verify that the remote control is compatible (433MHz, 1527 learning code).
- Re-attempt the learning process for the desired mode.
- Check the remote control's battery.
- Ensure there are no strong RF interferences nearby.
- Relay clicks but device doesn't turn on/off:
- Check the wiring connections to your load (e.g., LED, motor). Ensure they are connected to the correct NO/COM or NC/COM terminals.
- Verify that the load's power requirements (voltage and current) do not exceed the receiver's maximum load (2A, 40W general, 12W motor).
- Ensure the load itself is functional.
- Unexpected behavior (e.g., relay turns on/off randomly):
- Clear all learned codes (reset) and re-pair the remote control.
- Check for strong electromagnetic interference in the environment.
- High power consumption concerns:
- The static current of the module is very low (3.6mA-7mA). If you observe high power consumption, verify your power supply and load connections. Ensure no short circuits are present.
- Confirm that the connected load's power draw is within the specified limits.
- Controlling 3V DC motors:
- The receiver's working voltage range is DC 3.7V-24V. While it can control motors, ensure your 3V motor is compatible with the output voltage provided by your setup (which would be the same as the receiver's input voltage).
- The maximum supported power for motor type applications is 12W. Do not exceed this limit.
7. User Tips
- Remote Control Compatibility: This receiver is designed to work with 433MHz remote controls that use the 1527 learning code protocol. Ensure your remote matches this specification for successful pairing.
- Wiring Precision: Double-check all wiring connections before applying power. Incorrect wiring can damage the module or the connected device. Pay close attention to DC+ and DC- for power, and NO, COM, NC for load control.
- Testing Modes: After pairing, test each operating mode (Momentary, Toggle, Latching) to ensure it functions as expected for your application.
- Clear Codes When Changing Remotes: If you switch to a new remote or experience unexpected behavior, always perform a "Clear Code" (reset) operation before attempting to pair new remotes.
- Load Limits: Be mindful of the maximum load current (2A) and power limits (40W general, 12W motor). Exceeding these limits can lead to overheating and damage.
8. Warranty and Support
For technical support or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
Manufacturer: QIACHIP