MatSee Plus 3 Phase Energy Monitor with 80A Clamp CT

Contents

MatSee Plus Tuya Smart Life WiFi 3 Phase Energy Monitor Instruction Manual

Model: 3 Phase Energy Monitor with 80A Clamp CT

Brand: MatSee Plus

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MatSee Plus Tuya Smart Life WiFi 3 Phase Energy Monitor. This device is designed to accurately monitor power consumption in your facility, providing real-time data and historical usage statistics via the mobile application. It measures Voltage, Current, Power Factor, Active Power, and Frequency, and supports both energy usage and production measurements.

2. Main Features

  • Tuya compliant for smart home integration.
  • Supports linkage with other Tuya devices for automation.
  • Compatible with single-phase and three-phase electrical systems.
  • Measures real-time Voltage, Current, Power Factor, Active Power, and Frequency.
  • Supports energy usage and production measurement.
  • Provides usage and production trends by hour, day, and month.
  • Lightweight and designed for easy installation.

3. Technical Specifications

AttributeValue
Brand NameMatSee Plus
State of AssemblyReady-to-Go
CompatibilityAll Compatible
Communication MethodWi-fi
Camera EquippedNo
OriginMainland China
CertificationCE, RoHS
App NameTuya Smart, Smart Life
Wireless TypeWiFi 2.4Ghz (not Support 5Ghz)
WiFi Standard802.11b/g/n
Measure Range0.1-80A
Input Voltage90~250V AC 50/60Hz
Wireless Frequency2.4GHz
Ambient Temperature Range-20 ~ +55 ℃
Calibrated Metering AccuracyWithin ±2%
DirectionBidirectional
Reporting CycleEvery 15 seconds
Din Rail Height35mm
Max. Load Current16A Dry contact

Package Dimensions & Weight:

  • Length: 23 cm
  • Width: 20 cm
  • Height: 10 cm
  • Weight: 0.37 kg

4. Package Contents

The package typically includes:

  • MatSee Plus 3 Phase Energy Monitor unit
  • 80A Clamp CTs (quantity may vary based on order, typically three for 3-phase)
  • Instruction Manual (this document)
MatSee Plus 3 Phase Energy Monitor with 80A Clamp CT and WiFi module
The MatSee Plus 3 Phase Energy Monitor unit with three 80A Clamp CTs.

5. Safety Information

  • WARNING: Installation should only be performed by a qualified electrician.
  • Ensure the main power supply to your facility is completely turned OFF before attempting any installation or wiring.
  • Do not operate the device in wet or damp conditions.
  • Do not exceed the maximum rated current (80A for CT clamps, 16A for dry contact relay).
  • Keep out of reach of children.

6. Setup and Installation

6.1 Physical Installation (Din Rail Mounting)

The energy monitor is designed for mounting on a standard 35mm DIN rail.

MatSee Plus energy monitor mounted on a 35mm DIN rail
The energy monitor is designed for easy mounting on a standard 35mm DIN rail.

6.2 Wiring Instructions

IMPORTANT: Ensure main power is OFF before wiring.

CT Clamp Direction:

For split core CTs, open the clamp to locate the arrow (P1→P2) or (K→L), or check the sticker on the outside of the clamp. This indicates the direction of the CT. The CT supports bi-directional sensing.

Close-up of an 80A Clamp CT showing P1 to P2 direction marking
A close-up of the 80A Clamp CT, indicating the P1 to P2 direction for correct installation.

Single Phase Wiring Diagram:

Wiring diagram for Single Phase electricity with the energy monitor and CT clamp
Wiring diagram for a single-phase electricity system, showing connection of the energy monitor, circuit breaker, and CT clamp. Note: Please make sure the main power in your facility is off before installing.

3 Phase Wiring Diagram:

Wiring diagram for 3 Phase electricity with the energy monitor and CT clamps
Detailed wiring diagram for a 3-phase electricity system, showing connection of the energy monitor, circuit breaker, loads, and inverter. Note: When installing, please ensure that the circuit measured by CT is in the same phase as the circuit powered by the meter.

6.3 App Setup and Pairing

Download the 'Tuya Smart' or 'Smart Life' app from your mobile app store. Follow the in-app instructions to add the device. The video below demonstrates the pairing process and app features.

A video showcasing the setup process, app integration, and real-time monitoring capabilities of the MatSee Plus energy monitor.

7. Operation

7.1 Real-time Monitoring

Once connected, open the Tuya Smart or Smart Life app to view real-time energy data. The app displays total energy usage, energy consumed per phase, and energy produced (if applicable).

Tuya Smart Life App overview screen showing total energy usage and relay switch
The app's overview screen displays total energy usage and allows control of the relay switch.

You can also view live data for Voltage, Current, Power Factor, and Active Power for each phase (A, B, C).

Tuya Smart Life App live data screen showing voltage, current, and active power for each phase
Live data view in the app, showing real-time voltage, current, power factor, and active power for each phase (A, B, C).

7.2 Electricity Statistics

The app provides detailed electricity statistics, allowing you to check hourly, daily, and monthly consumption and production trends.

Tuya Smart Life App electricity statistics showing hourly, daily, and monthly consumption graphs
Electricity statistics in the app, providing hourly, daily, and monthly consumption and production trends.

7.3 Automation and Scene Creation

The device supports automation through the Tuya Smart Life app. You can create scenes to link the energy monitor with other Tuya-compatible devices. For example, you can set up a rule where if power or current exceeds a certain value, another Tuya device is activated or a notification is sent.

Tuya Smart Life App 'Create Scene' interface for automation based on device status changes
The 'Create Scene' feature in the app allows setting up automations, such as triggering actions when device status changes.
Tuya Smart Life App 'Add Task' interface for automation, showing options like 'Control Single Device' and 'Send notification'
Adding a task within an automation scene, with options to control other Tuya devices or send notifications.

8. Maintenance

  • Keep the device clean and free from dust. Use a dry, soft cloth for cleaning.
  • Do not use abrasive cleaners or solvents.
  • Ensure all wiring connections remain secure. Periodically check for any loose connections.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.

9. Troubleshooting

  • Device not connecting to Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. The device does not support 5GHz networks. Check your Wi-Fi password and signal strength.
  • Inaccurate readings: Verify that the CT clamps are installed correctly, with the arrow pointing in the correct direction relative to the current flow. Ensure the circuit measured by the CT is in the same phase as the circuit powering the meter.
  • App not displaying data: Check your internet connection and ensure the device is powered on and connected to Wi-Fi. Restart the app or the device if necessary.
  • Automation not working: Double-check your scene settings in the Tuya Smart Life app. Ensure all linked devices are online and functioning correctly.

10. User Tips

  • This device is not compatible with Home Assistant.
  • The Tuya app displays hourly power consumption data for a maximum of seven days. For longer-term detailed analysis, consider exporting data if the app supports it, or noting down key figures periodically.
  • If you need to monitor a ZigBee network, please note that this is a Wi-Fi device and a separate ZigBee version may be available from the manufacturer.

11. Warranty and Support

For warranty information and technical support, please refer to the seller's official store or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.