Introduction
Thank you for choosing the Juson Audio JTA50 Hybrid Stereo Tube Amplifier. This amplifier combines the authentic warmth and character of vacuum tubes with the efficiency of a Class AB amplifier, delivering an articulate and natural sonic experience. It features a modern design with vintage aesthetics and offers a variety of input options for versatile home audio systems. Please read this manual thoroughly before operating the device to ensure proper use and optimal performance.
Package Contents
Please check the package carefully to ensure all items are present and in good condition:
- 1 * JTA50 Hybrid Stereo Tube Amplifier
- 1 * Remote Control
- 1 * AC Power Cable
- 1 * User Manual

Figure 1: Package Contents
Product Overview
Front Panel
The front panel provides access to essential controls and indicators:

Figure 2: Front Panel Layout
- IR (Infrared Receiver): Receives signals from the remote control.
- Power Switch / Power Indicator: Turns the unit on/off and indicates power status.
- VU Meter: Displays the audio output level of the left and right channels.
- Bass Control: Adjusts the low-frequency response.
- Treble Control: Adjusts the high-frequency response.
- 1/4" TRS Headphone Output: For connecting headphones.
- Source Input Selector: Buttons to select input sources (PHONO, AUX, BT, OPT, COAX, PC-USB).
- Volume Control: Adjusts the overall output volume.
Rear Panel
The rear panel houses all input and output connections:

Figure 3: Rear Panel Layout
- Bluetooth Antenna: Connect the included Bluetooth antenna for wireless connectivity.
- Ground Terminal (GND): For connecting the ground wire from a turntable.
- Active Subwoofer Output (SW. OUT): Mono RCA output for connecting an active subwoofer.
- Digital Optical Input (OPT): For connecting digital audio sources via optical cable.
- PC-USB Input: For connecting to a computer for digital audio playback.
- Digital Coaxial Input (COAX): For connecting digital audio sources via coaxial cable.
- Line Level AUX RCA Input: For connecting analog audio sources (e.g., CD player, streamer).
- Phono RCA Input: For connecting a turntable with a phono output signal.
- Passive Speaker Output: Red and black terminals for connecting passive speakers (4-8 ohms).
- AC Power Input: For connecting the AC power cable.
- AC110V or AC220V Voltage Selector Switch: Selects the appropriate voltage for your region.
- Noiseless Cooling Fan: Automatically activates to maintain optimal operating temperature.
Setup Instructions
Follow these steps to set up your Juson Audio JTA50 amplifier:
- Unpacking: Carefully remove all components from the packaging. Retain the packaging for future transport or storage.
- Placement: Place the amplifier on a stable, flat surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight.
- Voltage Selection: Before connecting the power cable, ensure the AC110V or AC220V Voltage Selector Switch on the rear panel is set to the correct voltage for your region. Incorrect voltage selection can damage the unit.
- Connect Bluetooth Antenna: Screw the included Bluetooth antenna onto the designated connector on the rear panel.
- Speaker Connection: Connect your passive speakers (4-8 ohms) to the Passive Speaker Output terminals on the rear panel. Ensure correct polarity (red to red, black to black) for each speaker.
- Input Connections:
- Turntable (Phono): If connecting a turntable, ensure it is set to output a phono signal. Remove the covers from the PHONO RCA plugs on the amplifier and connect the turntable's RCA cables. Connect the turntable's ground wire to the GND terminal on the amplifier's rear panel. If your turntable outputs a line-level signal, connect it to the AUX input instead.
- Analog Sources (AUX): Connect devices like CD players or streaming devices using RCA cables to the Line Level AUX RCA Input.
- Digital Sources (Optical/Coaxial): Connect digital audio sources (e.g., TV, game console) using optical or coaxial cables to the respective inputs.
- Computer (PC-USB): Connect your computer to the PC-USB Input using a USB cable for high-quality digital audio playback.
- Active Subwoofer (Optional): If using an active subwoofer, connect it to the Active Subwoofer Output (SW. OUT) using an RCA cable.
- Power Connection: Once all audio connections are made, connect the AC Power Cable to the amplifier's AC Power Input and then to a wall outlet.
For a visual guide on connecting various devices, please refer to the setup video:
Video 1: Juson Audio JTA50 Setup and Operation

Figure 4: Connection Diagram
Operating Instructions
- Power On/Off: Press the Power Switch button on the front panel to turn the amplifier on or off. The power indicator will illuminate when the unit is on.
- Input Selection: Use the input selector buttons (PHONO, AUX, BT, OPT, COAX, PC-USB) on the front panel or the corresponding buttons on the remote control to choose your desired audio source.
- Volume Control: Rotate the large Volume knob on the front panel clockwise to increase volume and counter-clockwise to decrease it. You can also adjust the volume using the VOL+ and VOL- buttons on the remote control.
- Tone Controls: Use the Bass and Treble knobs on the front panel to fine-tune the low and high frequencies to your preference.
- Headphone Use: Plug your 6.35mm headphones into the Headphone Output jack on the front panel for private listening. Note: When headphones are plugged in, the VU meters will stop flickering as they are designed to reflect speaker output only. This is normal operation and not a defect.
- Remote Control: The included remote control allows convenient operation from a distance. It includes buttons for input selection, volume adjustment, mute, and playback controls (for USB/Bluetooth sources).

Figure 5: Amplifier with Remote Control
- Bluetooth Pairing: Select the 'BT' input. The amplifier will enter pairing mode. On your audio device (smartphone, tablet), search for 'JTA50' in the Bluetooth settings and connect.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the amplifier's exterior. Avoid using liquid cleaners or solvents.
- Tube Care: The vacuum tubes are delicate. Avoid touching them when the amplifier is on or recently turned off, as they can be very hot. If a tube needs replacement, ensure the amplifier is unplugged and cooled down. Consult the manufacturer for compatible replacement tubes.
- Ventilation: Ensure the cooling fan and ventilation openings are not obstructed to prevent overheating. The built-in smart cooling fan will activate automatically when the internal temperature exceeds 60 degrees Celsius.
- Storage: If storing the amplifier for an extended period, unplug it from the power outlet and store it in a cool, dry place, preferably in its original packaging.
Troubleshooting
- No Power:
- Check if the AC power cable is securely connected to both the amplifier and the wall outlet.
- Verify that the voltage selector switch on the rear panel is set correctly for your region.
- Ensure the wall outlet is functioning.
- No Sound:
- Confirm the amplifier is powered on and the correct input source is selected.
- Check that the volume is turned up and not muted.
- Verify that speakers are correctly connected and functional.
- Ensure the audio source device is playing and its volume is adequate.
- Distorted Sound:
- Check all cable connections for looseness or damage.
- Ensure the input signal is not too strong, causing clipping.
- Verify that your speakers' impedance matches the amplifier's requirements (minimum 4 ohms).
- Test with a different audio source to rule out source issues.
- Bluetooth Connection Issues:
- Make sure the 'BT' input is selected on the amplifier.
- Ensure your device is in Bluetooth pairing mode and within range.
- Try unpairing and re-pairing the device.
- Check for potential interference from other wireless devices.
- VU Meters Not Flickering with Headphones:
- This is normal behavior. The VU meters are designed to reflect the audio output level to the speakers. When headphones are plugged in, the speaker output is typically disengaged, and thus the VU meters will not show activity.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | JUSON AUDIO |
| Model Number | JTA50 |
| Channels | 3 (2.1) |
| Maximum Power Per Channel | 65W |
| Power Output | 65WPC RMS@ 4ohms |
| THD | 1% @ 65WPC |
| Minimum Speaker Impedance | 4 ohms |
| Channel Separation | 50dB |
| Frequency Response | 20-20,000Hz |
| Sub Output | Preout for active subwoofer |
| Bluetooth | Version 5 supports SBC and AAC codecs |
| Media Playback File Support | FLAC, WAV, APE, WMA, MP3 |
| Digital audio DAC sample rate | Up to 16-bit/48kHz |
| Preamplifier Tube | 2*6J9+2*10DX8 tubes (Note: Some stock may use 2*6F1+2*WY-2 Tubes) |
| Transistors | Toshiba A1941X 2, Toshiba C5198X2 |
| Inputs | Optical, Coaxial, Bluetooth 5.0, 2X Stereo RCA, USB |
| Output | Speaker, subwoofer, headphone |
| Power | 110/220 VAC, 50/60 Hz Standard IEC Connection |
| Dimensions | 271x286x166mm |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
All specifications are tested by Juson Audio. The company reserves the right to update specifications without further notice.
User Tips
- Speaker Compatibility: The amplifier is designed to work with speakers having a minimum impedance of 4 ohms. Always ensure your speakers meet this requirement for optimal performance and to prevent damage to the amplifier or speakers. If you are unsure about your speaker's compatibility, consult your speaker's manual or contact support.
- VU Meter Behavior: When headphones are plugged into the 1/4" TRS output, the VU meters will stop flickering. This is normal operation as the VU meter is designed to reflect speaker output.
Warranty & Support
Juson Audio is committed to providing high-quality products and excellent customer service. We offer the following warranty and support:
- Warranty Period: Free repairing service for 24 months from the date of receipt. This excludes man-made damage and/or misuse. For vacuum tube parts, a 3-month warranty applies.
- Reporting Defects: Defective units must be reported with photos, videos, or other verifiable evidence of the problems and returned within the warranty period. You will need to submit a tracking number and the PO number after arranging returns with original packaging.
- Post-Warranty Support: After the warranty expires, Juson Audio teams are available to offer technical support online to assist you in repairing the product.
- Return Policy: You have 7 days to contact us and 15 days to return the item from the date it was received. If the item is in your possession for more than 7 days, it is considered used, and a refund or replacement will not be issued. After 15 days, the 24-month warranty will apply.
Juson Audio aims to make the sound better and will focus on audio always. Make a deal, enjoy lifetime services! Juson Audio's Team will do its best to provide the best possible after-sales service. Please feel free to contact us for any technical support!