Introduction
Thank you for purchasing the MLOVE P2 Portable Bluetooth Speaker. This manual provides detailed instructions on how to set up, operate, and maintain your speaker to ensure optimal performance and longevity. The MLOVE P2 features Bluetooth 5.3 connectivity, dual full-range speakers with low-frequency amplifiers, dazzling RGB lighting, IPX7 waterproof and IP6X dustproof design, and TWS stereo sound capabilities.
Package Contents
Please check the package carefully to ensure all items are present:
- MLOVE P2 Portable Bluetooth Speaker
- USB Charging Cable
- User Manual
- Hand Strap
Product Overview
Familiarize yourself with the buttons and ports on your MLOVE P2 speaker:
| Component | Function |
|---|---|
| Mode Switch / Remark / Bluetooth Disconnection | Switches between input modes (Bluetooth, Micro SD, AUX), or disconnects Bluetooth. |
| LED Indicator | Indicates speaker status (e.g., pairing, charging). |
| Volume + / Next Song | Increases volume; long press for next song. |
| Play / Pause | Plays or pauses audio playback. |
| Volume - / Play Previous Song | Decreases volume; long press for previous song. |
| Power / Reset | Powers the speaker on/off; long press to reset. |
| Power LED Indicator / Battery Indication | Shows power status and battery level. |
| Charging / Data Access Port (USB) | Connects for charging or data transfer. |
| Micro SD Playback Slot | Insert Micro SD card for direct audio playback. |
Setup
-
Charging the Speaker
Before first use, fully charge the MLOVE P2 speaker. Connect the provided USB charging cable to the Charging/Data Access Port on the speaker and the other end to a USB power adapter (not included) or a computer's USB port. The Power LED Indicator will show charging status.
-
Powering On/Off
Press and hold the Power/Reset button for a few seconds to turn the speaker ON or OFF. The LED indicator will light up when powered on.
Operating Instructions
Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (LED indicator will typically flash).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "MLOVE P2" from the list of devices.
- Once paired, the speaker will emit a confirmation sound, and the LED indicator will stop flashing.
TWS (True Wireless Stereo) Pairing
To achieve a surround sound experience, you can pair two MLOVE P2 speakers together:
- Ensure both MLOVE P2 speakers are powered on and not connected to any other Bluetooth device.
- On one speaker, press and hold the Mode Switch button (or a dedicated TWS button if available, refer to specific product instructions if different) until you hear a TWS pairing prompt.
- The two speakers will automatically search for and connect to each other. Once connected, they will emit a confirmation sound.
- Now, connect your device to one of the MLOVE P2 speakers via Bluetooth as described above. Both speakers will play audio in stereo.
RGB Lights Control
The MLOVE P2 features dazzling RGB lighting that changes with the rhythm of the music. The specific control for the RGB lights (e.g., on/off, mode change) is typically integrated with the Mode Switch or a dedicated light button. Refer to the speaker's physical buttons for light control options.
Playback Controls
- Play/Pause: Press the Play/Pause button.
- Volume Up: Press the Volume + button.
- Volume Down: Press the Volume - button.
- Next Song: Long press the Volume + button.
- Previous Song: Long press the Volume - button.
Micro SD Card Playback
Insert a Micro SD card with audio files into the Micro SD Playback Slot. The speaker will automatically switch to Micro SD mode and begin playing music. Use the playback controls to manage your music.
AUX Input Playback
Connect an audio device to the speaker's AUX input (if available, typically shared with the charging port or a separate 3.5mm jack) using an AUX cable (not included). The speaker will switch to AUX mode, and audio from your connected device will play through the speaker.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Water Exposure: While the speaker is IPX7 waterproof and IP6X dustproof, avoid prolonged submersion or exposure to harsh chemicals. Ensure the port cover is securely closed when near water.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Low battery. | Charge the speaker fully. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; device Bluetooth off; too far from device. | Ensure speaker is in pairing mode, Bluetooth is enabled on device, and devices are within range (10m). Try restarting both devices. |
| No sound. | Volume too low; incorrect input mode; device not playing. | Increase volume on both speaker and device. Check input mode (Bluetooth, Micro SD, AUX). Ensure audio is playing on the connected device. |
| TWS pairing fails. | Speakers already paired to another device; too far apart. | Ensure both speakers are disconnected from other devices. Place them close together and retry TWS pairing. |
| RGB lights not working. | Lights turned off or in a static mode. | Press the light control button (if available) or Mode Switch to cycle through light modes. |
Specifications
| Feature | Detail |
|---|---|
| Brand Name | MLOVE |
| Model | P2 |
| Bluetooth Version | 5.3 |
| Speaker Type | Portable |
| Audio Crossover | Full-Range |
| Speaker Configuration | 2 Full Frequency Speakers + 2 Low-Frequency Amplifiers |
| Number of Loudspeaker Enclosure | 1 (supports TWS for stereo pair) |
| Output Power | 15 W |
| Input Power | 25-49 W |
| Power Source | Battery (Built-in 3600mAh Lithium Battery) |
| Playtime | Up to 24 hours (at medium volume) |
| Waterproof Rating | IPX7 |
| Dustproof Rating | IP6X |
| Material | Plastic |
| Communication | Bluetooth |
| Input/Output | USB |
| Sound Mode | Standard Mode |
| Voice Control | No |
| Support APP | No |
| Support Memory Card | Yes (Micro SD) |
| Intelligent Personal Assistant | None |
| RGB Lighting | Yes (16.8 million colors, rhythm-synced) |
User Tips
- For optimal sound quality, ensure the speaker is placed on a stable surface.
- When using TWS, keep both speakers within close proximity for a stable connection.
- The 24-hour playtime is an estimate; actual battery life may vary based on volume level and RGB light usage.
- To maximize the RGB light effect, use the speaker in dimly lit environments.
Warranty and Support
MLOVE provides a standard warranty for this product. For detailed warranty information, technical support, or service inquiries, please refer to the official MLOVE website or contact your retailer. Keep your purchase receipt as proof of purchase.
