1. Introduction
The GUWIEYG CCS2 to CCS1 EV Charger Adapter is designed to enable fast DC charging for electric vehicles equipped with a CCS1 standard inlet, using CCS2 superchargers or Type2 AC chargers. This adapter is a product of GUWIEYG, a global leading brand in smart EV charging technologies and a developer of green energy products. Founded in 2022, GUWIEYG is committed to providing innovative and reliable EV charging solutions.
This manual provides essential information for the safe and efficient use of your adapter, including setup, operation, maintenance, and troubleshooting.

2. Safety Information
WARNING: Pay attention to the vehicle model and ensure you use special charging equipment compatible with your EV and the adapter. Failure to do so may result in damage to the vehicle, charger, or adapter, and could pose a safety risk.
- Do not use the adapter if any damage is visible. Contact support immediately.
- Ensure the adapter is clean and dry before connecting.
- Do not attempt to disassemble or modify the adapter.
- Keep out of reach of children.
- Operate within the specified temperature range to prevent overheating or damage.
3. Product Features
The GUWIEYG CCS2 to CCS1 EV Charger Adapter is engineered for high performance and durability:
- High Power Capability: Supports up to 500A DC current and 500kW power, with a maximum voltage of 1000V.
- Robust Construction: Made with PA66 flame retardant casing and silver-plated copper pins for greater efficiency and durability.
- Advanced Protection: Features intelligent dual-temperature control to prevent overheating, with an IP54 rating for water and dust resistance.
- Extreme Temperature Resilience: Designed to operate in temperatures ranging from -40°C to +85°C.
- Durability Tested: Subjected to over 10,000 plug-in tests and 6.5FT drop tests.



4. Setup and Operating Instructions
Before Use
Always ensure the adapter is in good condition before use. If any damage is observed, do not use it and contact GUWIEYG support.
Connecting the Adapter
- Identify your EV's inlet: Ensure your electric vehicle has a CCS1 standard charging inlet.
- Identify the charger: Ensure the charging station provides a CCS2 or Type2 AC charging cable.
- Connect the adapter to the EV: Firmly insert the CCS1 end of the adapter into your vehicle's CCS1 charging inlet.
- Connect the charger to the adapter: Firmly insert the CCS2 charging cable from the charging station into the CCS2 end of the adapter.
- Check connections: Verify that both connections are secure and fully seated.
- Initiate charging: Follow the instructions on the charging station to begin the charging process.

Charging Time
Charging time can vary depending on the supercharger station's power output, your electric vehicle's specifications, environmental conditions, and the battery's current temperature. The adapter includes built-in temperature monitoring. If the terminal temperature exceeds 85°C, the charging power may be automatically reduced to prevent damage and ensure safety.
5. Maintenance
- Cleaning: Regularly wipe the adapter with a dry, clean cloth. Do not use harsh chemicals or abrasive materials.
- Storage: Store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures, when not in use. The product comes with a carrying case for protection.
- Inspection: Periodically inspect the adapter for any signs of wear, damage, or corrosion on the connectors or casing.

6. Troubleshooting
If the vehicle fails to initiate charging, please consider the following steps:
- Ensure your vehicle supports CCS charging functionality.
- Check for firm connections at both ends of the adapter (to the EV and to the charger).
- Safely unplug the adapter and charger, then re-plug them following the user manual procedure.
- Verify the charging status on the Supercharger display and your electric vehicle's display.
- If issues persist after these steps, please contact GUWIEYG support.
7. Specifications
| Feature | Specification |
|---|---|
| Adapter Type | CCS2 to CCS1 Adapter |
| Current (DC) | 500A MAX |
| Current (AC) | 32A AC Max |
| Voltage (DC) | 1000V MAX |
| Voltage (AC) | 220V AC Max |
| Power | 500kW MAX |
| IP Rating | IP54 |
| Shell Material | PA66 |
| Pin Material | Copper-Silver |
| Operating Temperature | -40°C to +85°C |
| Charger Outlet Standard | CCS2/TYPE2 |
| Vehicle Inlet Standard | CCS1 |
| Weight | 1KG |
| Warranty | 2 Years |
Note: Other adapter types (e.g., CCS1-CCS2, NACS-CCS1, CCS2-NACS-DC, CCS2-NACS-AC/DC) may have slightly different specifications. Always refer to the specific product labeling for precise details.
8. Warranty and Support
The GUWIEYG CCS2 to CCS1 EV Charger Adapter comes with a 2-year warranty. For maintenance, servicing, replacements, or any technical assistance, please contact our support team.
Contact Information:
- Website: guwieyg.com
- Email: support@guwieyg.com
- Manufacturer: JI NAN IKSONG E-COMMERCE CO.,LTD
- Address: 1034, Building A, Xi Bu Chuang Xin Chan Ye Yuan, Chang Qing, Ji Nan, Shan Dong, PRC, 25000.
A detailed user manual in PDF format is also available for download from the official GUWIEYG website or by scanning the QR code provided with the product packaging.
9. User Tips
- Check Compatibility: Always confirm that your EV's charging inlet (CCS1) and the charging station's cable (CCS2 or Type2 AC) are compatible with this adapter before attempting to charge. Questions regarding specific car models like BMW iX3, Mercedes EQS (US), Chevrolet Bolt EUV, or Hyundai IONIQ 5 (US) should be directed to GUWIEYG support or your vehicle manufacturer to ensure full compatibility.
- Monitor Charging Power: While the adapter supports high power, some users have observed that the adapter might reduce charging power in certain scenarios. This could be due to vehicle limitations, charger specifications, or internal temperature management. If you experience slower-than-expected charging, check the charging station's output and your vehicle's charging rate.
- Secure Connections: Ensure all connections are firm and fully seated to prevent interruptions or potential safety hazards during charging.
- Temperature Awareness: The adapter has built-in temperature monitoring. If the adapter feels excessively hot, charging power may be reduced. Ensure adequate ventilation around the adapter during use.
- Quality Assurance: The adapter has been reported by users to be of good quality, well-packaged, and effective in charging.