ESPRESSIF ESP32-P4-Function-EV-Board

Contents

ESP32-P4-Function-EV-Board AIoT Development Kit User Manual

Model: ESP32-P4-Function-EV-Board

Brand: ESPRESSIF

1. Introduction

Top-down view of the ESP32-P4-Function-EV-Board.
Figure 1.1: ESP32-P4-Function-EV-Board

This image displays the top view of the ESP32-P4-Function-EV-Board, showcasing its various components and connectors.

The ESP32-P4-Function-EV-Board is a versatile multimedia development board powered by the advanced ESP32-P4 chip. This board is designed for a wide range of AIoT applications, offering high performance, low power consumption, and extensive peripheral support. It integrates a dual-core 400 MHz RISC-V processor and supports up to 32 MB PSRAM, making it suitable for complex audio and video processing tasks.

The board also features the ESP32-C6-MINI-1 module, providing Wi-Fi 6 and Bluetooth 5 (LE) connectivity. With support for MIPI-CSI/DSI, H.264 hardware encoding, and a 7-inch capacitive touch screen (1024x600 resolution), it is an ideal platform for prototyping visual doorbells, network cameras, smart home control panels, and other advanced embedded systems.

Key Features:

  • Powered by ESP32-P4: Dual-core 400 MHz RISC-V processor.
  • Includes ESP32-C6-MINI-1: Wi-Fi 6 & Bluetooth 5 (LE) module.
  • AI acceleration with integrated 32 MB PSRAM and 16 MB Flash.
  • High-definition camera processing, supporting MIPI-CSI and H.264 hardware encoding.
  • High-resolution display, supporting MIPI-DSI and graphics acceleration.

Target Applications:

  • IP Camera, Face Tracking Camera
  • Smart locks and Video Doorbell Cameras
  • Smart home control panels, appliance control screens, and industrial control screens
  • LED advertising screens, LCD Digital Price Tags, and Kiosks
  • USB Hub, robotic control, and appliance control devices
  • Two-wheel vehicle dashboards

2. Package Contents

The ESP32-P4-Function-EV-Board Kit typically includes the following items:

  • ESP32-P4-Function-EV-Board Main Board (with ESP32-P4 chip and ESP32-C6 module on board)
  • Accessories bag (includes DuPont Wires, Flat Flex Cables, and Brass Standoffs)
  • 7-inch LCD with 1024x600 resolution, Capacitive Touch Screen with MIPI-DSI
  • 2MP Camera with MIPI-CSI
  • LCD Adapter
  • Camera Adapter
ESP32-P4-Function-EV-Board kit contents including main board, display, camera, and accessories.
Figure 2.1: ESP32-P4-Function-EV-Board Kit Contents

This image shows the main ESP32-P4-Function-EV-Board, a 7-inch LCD screen, a 2MP camera module, and an accessories bag containing various cables and standoffs.

3. Board Layout and Components

Understanding the layout of the ESP32-P4-Function-EV-Board is crucial for proper setup and operation. The following diagrams illustrate the key components on both the front and back of the board.

Detailed front and back view of the ESP32-P4-Function-EV-Board with all components labeled.
Figure 3.1: ESP32-P4-Function-EV-Board Component Layout (Front and Back)

This image provides a comprehensive labeled diagram of the ESP32-P4-Function-EV-Board, highlighting all major components and connectors on both the front and back sides for easy identification and connection.

Key Components Description:

Key ComponentDescription
J1All available GPIO pins are broken out to the header block J1 for easy interfacing.
ESP32-C6 Module Programming ConnectorThe connector can be used with ESP-Prog or other UART tools to flash firmware onto the ESP32-C6 module.
ESP32-C6-MINI-1 ModuleThis module serves as the Wi-Fi and Bluetooth communication module for the board.
MicrophoneOnboard microphone connected to the interface of Audio Codec Chip.
Reset ButtonResets the board.
Audio Codec ChipES8311 is a low-power mono audio codec chip. It includes a single-channel ADC, a single-channel DAC, a low-noise pre-amplifier, a headphone driver, digital sound effects, analog mixing, and gain functions. It interfaces with the ESP32-P4 chip over I2S and I2C buses to provide hardware audio processing independent of the audio application.
Speaker Output PortThis port is used to connect a speaker. The maximum output power can drive a 4 Ω, 3 W speaker. The pin spacing is 2.00 mm (0.08").
Audio PA ChipNS4150B is an EMI-compliant, 3 W mono Class D audio power amplifier that amplifies audio signals from the audio codec chip to drive speakers.
5 V to 3.3 V LDOA power regulator that converts a 5 V supply to a 3.3 V output.
BOOT ButtonThe boot mode control button. Press the Reset Button while holding down the Boot Button to reset ESP32-P4 and enter firmware download mode. Firmware can then be downloaded to SPI flash via the USB-to-UART Port.
Ethernet PHY ICEthernet PHY chip connected to the ESP32-P4 EMAC RMII interface and RJ45 Ethernet Port.
Buck ConverterA buck DC-DC converter for the 3.3 V power supply.
5 V Power-on LEDThis LED lights up when the board is powered through any USB Type-C port.
RJ45 Ethernet PortAn Ethernet Port supporting 10/100 Mbps adaptive.
USB Full-speed PortUSB Type-C port that supports USB 2.0 Full-speed data rate. It can be used as the power supply interface for the development board and as a communication interface.
USB Serial/JTAG PortUSB Type-C port that supports USB 2.0 Full-speed data rate. It can be used to flash firmware to the ESP32-P4 chip, communicate with the chip via the USB protocol, and perform JTAG debugging.
USB 2.0 Type-C PortThe USB 2.0 Type-C Port is connected to the USB 2.0 OTG High-Speed interface of ESP32-P4, compliant with the USB 2.0 specification. When communicating with other devices via this port, ESP32-P4 acts as a USB device connecting to a USB host. Note that USB 2.0 Type-C Port and USB 2.0 Type-A Port cannot be used simultaneously. USB 2.0 Type-C Port can also be used for powering the board.
USB 2.0 Type-A PortThe USB 2.0 Type-A Port is connected to the USB 2.0 OTG High-Speed interface of ESP32-P4, compliant with the USB 2.0 specification. When communicating with other devices via this port, ESP32-P4 acts as a USB host, providing up to 500 mA of current. Please note that USB 2.0 Type-C Port and USB 2.0 Type-A Port cannot be used simultaneously.
Power SwitchPower On/Off Switch. Toggling toward the ON sign powers the board on (5 V), toggling away from the ON sign powers the board off.
SwitchTPS2051C is a USB power switch that provides a 500 mA output current limit.
MIPI CSI ConnectorThe FPC connector 1.0K-GT-15PB is used for connecting external camera modules to enable image transmission. For details, please refer to 1.0K-GT-15PB specification in Related Documents. FPC specifications: 1.0 mm pitch, 0.7 mm pin width, 0.3 mm thickness, 15 pins.
ESP32-P4A high-performance MCU with large internal memory and powerful image and voice processing capabilities.
40 MHz XTALAn external precision 40 MHz crystal oscillator that serves as a clock for the system.
32.768 kHz XTALAn external precision 32.768 kHz crystal oscillator that serves as a low-power clock while the chip is in deep-sleep mode.
MIPI DSI ConnectorThe FPC connector 1.0K-GT-15PB is used for connecting displays. For details, please refer to 1.0K-GT-15PB Specification in Related Documents. FPC specifications: 1.0 mm pitch, 0.7 mm pin width, 0.3 mm thickness, 15 pins.
SPI flashThe 16 MB flash is connected to the chip via the SPI interface.
MicroSD Card SlotThe development board supports a MicroSD card in 4-bit mode and can store or play audio files from the MicroSD card.

4. Setup Instructions

Follow these steps to set up your ESP32-P4-Function-EV-Board:

  1. Connect Display (Optional): If using the 7-inch LCD, connect it to the MIPI DSI Connector using the provided LCD Adapter and Flat Flex Cable. Ensure the cable is inserted correctly and securely.
  2. Connect Camera (Optional): If using the 2MP Camera, connect it to the MIPI CSI Connector using the provided Camera Adapter and Flat Flex Cable. Verify the connection is firm.
  3. Insert MicroSD Card (Optional): If you plan to use external storage, insert a MicroSD card into the MicroSD Card Slot on the back of the board.
  4. Connect Peripherals (Optional): Connect any other desired peripherals (e.g., speakers to the Speaker Output Port, Ethernet cable to the RJ45 Ethernet Port, USB devices to USB Type-A or Type-C ports) as needed for your application.
  5. Power Supply: Connect a 5V power supply to one of the USB Type-C ports (USB Full-speed Port or USB Serial/JTAG Port). The 5V Power-on LED should light up.
  6. Power On: Toggle the Power Switch towards the "ON" sign to power on the board.
  7. Initial Connection to PC: For development, connect the USB Serial/JTAG Port to your computer using a USB Type-C cable. This port allows for firmware flashing, communication, and JTAG debugging.

Refer to the "Board Layout and Components" section (Figure 3.1) for visual guidance on connector locations.

5. Operating Instructions

Once the board is set up, you can proceed with development and operation:

  1. Firmware Flashing: To load your custom firmware or example code, ensure the board is connected to your PC via the USB Serial/JTAG Port. Press and hold the BOOT Button, then press and release the Reset Button to enter firmware download mode. Use Espressif's development tools (e.g., ESP-IDF) to flash the firmware.
  2. Development Environment: Install the Espressif IoT Development Framework (ESP-IDF) on your computer. This framework provides the necessary tools, APIs, and documentation for developing applications on ESP32-P4.
  3. Running Demo Code: Espressif provides demo code to help you get started. You can find examples and instructions at the official GitHub repository: https://github.com/espressif/esp-dev-kits/tree/master/esp32-p4-function-ev-board.
  4. Interacting with the Board:
    • Serial Communication: Use a serial terminal program on your PC to communicate with the board via the USB Serial/JTAG Port for debugging output and command input.
    • Display and Camera: If connected, the display and camera can be controlled via software running on the ESP32-P4. Refer to the ESP-IDF documentation and demo code for specific API usage.
    • Network Connectivity: Utilize the ESP32-C6-MINI-1 module for Wi-Fi and Bluetooth connectivity as per your application requirements.

6. Maintenance

To ensure the longevity and optimal performance of your ESP32-P4-Function-EV-Board, follow these maintenance guidelines:

  • Handle with Care: The board contains sensitive electronic components. Avoid dropping it or subjecting it to physical shock.
  • Keep Dry: Protect the board from moisture and liquids. Water damage can lead to irreversible malfunctions.
  • Avoid Static Discharge: Always handle the board in an anti-static environment or use proper grounding techniques to prevent electrostatic discharge (ESD) damage.
  • Cleanliness: Keep the board free from dust and debris. Use a soft, dry brush or compressed air for cleaning. Do not use liquid cleaners.
  • Proper Storage: When not in use, store the board in its original packaging or an anti-static bag in a cool, dry place.
  • Power Off When Not in Use: Always switch off the board using the Power Switch when it's not actively being used to prevent unnecessary wear and power consumption.

7. Troubleshooting

If you encounter issues with your ESP32-P4-Function-EV-Board, consider the following troubleshooting steps:

  • Board Not Powering On:
    • Ensure the power supply is connected to a USB Type-C port and is providing 5V.
    • Check if the Power Switch is in the "ON" position.
    • Verify the power cable is not damaged.
  • Firmware Flashing Issues:
    • Confirm the USB Serial/JTAG Port is correctly connected to your PC.
    • Ensure you are entering firmware download mode correctly (hold BOOT, press/release Reset).
    • Check your development environment setup and driver installations.
  • No Display Output:
    • Verify the MIPI DSI connector and Flat Flex Cable are securely attached to both the board and the LCD.
    • Ensure your firmware is configured to initialize and drive the display.
  • Camera Not Working:
    • Check the MIPI CSI connector and Flat Flex Cable for secure connections.
    • Confirm your firmware includes the necessary camera drivers and initialization code.
  • General Connectivity Problems (Wi-Fi/Bluetooth/Ethernet):
    • Ensure antennas are properly connected (if external).
    • Verify network configurations in your firmware.
    • Check physical Ethernet cable connection if applicable.

For more detailed troubleshooting, refer to the official Espressif documentation and community forums.

8. Specifications

Below are the technical specifications for the ESP32-P4-Function-EV-Board:

AttributeValue
Brand NameESPRESSIF
ModelESP32-P4-Function-EV-Board
TypeVoltage Regulator
ConditionNew
OriginMainland China
is_customizedYes
Hign-concerned ChemicalNone
ProcessorDual-core 400 MHz RISC-V (ESP32-P4)
Wireless ConnectivityWi-Fi 6 & Bluetooth 5 (LE) via ESP32-C6-MINI-1 module
Memory32 MB PSRAM, 16 MB Flash
Display InterfaceMIPI-DSI (supports 7-inch 1024x600 capacitive touch screen)
Camera InterfaceMIPI-CSI (supports 2MP camera)
USB PortsUSB 2.0 Type-C (Full-speed, power, communication), USB 2.0 Type-C (Serial/JTAG), USB 2.0 Type-A (Host, 500mA)
EthernetRJ45 Ethernet Port (10/100 Mbps adaptive)
AudioAudio Codec Chip (ES8311), Audio PA Chip (NS4150B), Microphone, Speaker Output Port
StorageMicroSD Card Slot (4-bit mode)
Power Input5V via USB Type-C
Package Length15 cm
Package Width11 cm
Package Height5 cm
Package Weight0.05 kg

9. Warranty and Support

For comprehensive support and additional resources, please refer to the official Espressif channels:

Espressif Systems is committed to providing comprehensive support for its products. Please utilize these resources for any assistance required.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.