INMAS BS09

Contents

MZYMI BS09 ENC Neckband Wireless Earphones User Manual

Model: BS09 | Brand: INMAS

1. Introduction

Thank you for choosing the MZYMI BS09 ENC Neckband Wireless Earphones. These earphones are designed to provide a superior audio experience with advanced features such as Environmental Noise Cancellation (ENC) for clear calls, Bluetooth 5.3 for stable connectivity, and HiFi stereo sound. The comfortable neckband design and waterproof rating make them ideal for sports and daily use. Please read this manual carefully to ensure proper use and maintenance of your earphones.

MZYMI BS09 ENC Neckband Wireless Earphones highlighting ENC noise reduction, silicone neck suspension, and HiFi sound quality.
MZYMI BS09 ENC Neckband Wireless Earphones with key features.

2. Package Contents

Please check the box for the following items:

  • MZYMI BS09 Bluetooth Headphones
  • User Manual
  • Type-C Charging Cable
  • Carrying Bag

3. Specifications

FeatureDetail
ModelBS09
BrandINMAS
CommunicationWireless (Bluetooth)
Bluetooth Version5.3
Wireless Range<10m
StyleIn-ear, Neckband
Earcups TypeSemi-open
Vocalism PrincipleDynamic
Driver Diameter10mm
Number of Drivers2
Frequency Response Range20 - 20000Hz
Impedance Rangeup to 32 Ω
Resistance32Ω
Sensitivity30dB
Sound IsolatingYes
Active Noise-CancellationNo (features ENC call noise reduction)
MicrophoneYes, Omnidirectional
Volume ControlYes
Control ButtonYes
FeaturesWaterproof, Amazon Alexa Support, Apple Siri Support, Dual Connection, Playback Control
Battery Capacity160mAh
Play Duration≈15 hours
Standby Time≈200 hours
Charging Duration≈2 hours
Charging MethodCable (Type-C)
Charging VoltageDC5V
MaterialPVC, ABS, Silica Gel
Weight (Earphones)≈25g
Product parameters table for MZYMI BS09 earphones.
Detailed product parameters.

4. Setup

4.1. Charging the Earphones

Before first use, fully charge your earphones. Connect the provided Type-C charging cable to the charging port on the neckband and plug the other end into a USB power source (e.g., computer, wall adapter). The charging indicator will show the charging status. A full charge takes approximately 2 hours.

Close-up of the Type-C charging interface on the earphone neckband.
Type-C charging interface for fast and convenient charging.

4.2. Powering On/Off

  • Power On: Press and hold the multifunction button until the indicator light flashes.
  • Power Off: Press and hold the multifunction button until the indicator light turns off.

4.3. Bluetooth Pairing

To connect your earphones to a device:

  1. Ensure the earphones are fully charged and powered off.
  2. Press and hold the multifunction button until the indicator light flashes red and blue alternately, indicating pairing mode.
  3. On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
  4. Select "MZYMI BS09" from the list of found devices.
  5. Once connected, the indicator light will flash blue slowly.

The earphones support dual connection, allowing them to be paired with two devices simultaneously.

Illustration of the Bluetooth 5.3 chip, emphasizing stronger and more stable performance.
Equipped with a new Bluetooth 5.3 chip for improved performance.

4.4. Wearing the Earphones

Place the neckband around your neck and insert the earbuds into your ears. The in-ear design with soft silicone ear caps ensures a comfortable and secure fit without pressure, even during sports. The silicone neck suspension is flexible and designed for comfort and durability.

Woman wearing MZYMI BS09 earphones, illustrating comfortable and lightweight fit.
Comfortable in-ear design with no pressure.
Close-up of the earphone fit, showing 25g weight and 98% stable fit.
Lithe fuselage with stable fit.

5. Operating Instructions

5.1. Multifunctional Wire Control

The earphones feature an inline remote for easy control of music playback and calls.

Diagram of the multifunctional wire control buttons and their functions for music and call modes.
Multifunctional wire control with easy buttons.

Music Mode:

  • Play/Pause: Short press the multifunction key.
  • Volume Increase: Short press the volume+ button.
  • Volume Decrease: Short press the volume- button.
  • Next Track: Long press the volume+ button for 2 seconds.
  • Previous Track: Long press the volume- button for 2 seconds.
  • Voice Assistant (Siri/Alexa): Short press the multifunction key 3 times.

Call Mode:

  • Answer/End Call: Short press the multifunction key.
  • Reject Call: Long press the multifunction button for 2 seconds.

5.2. Battery Life and Charging

The earphones provide approximately 15 hours of play duration and up to 200 hours of standby time on a single charge. Use the Type-C charging cable to recharge the device. A full charge takes about 2 hours.

Diagram showing 15 hours play duration, 200 hours standby time, and 2 hours charging duration.
Ultra-long endurance for extended use.

5.3. Magnetic Storage

The earbuds feature a personalized magnetic suction design, allowing them to snap together when not in use. This helps prevent slipping, loss, and entanglement of wires, making storage more convenient, especially during sports.

Close-up of the magnetic earbuds snapping together for easy storage.
Magnetic storage design for convenience.

6. Maintenance

  • Cleaning: Wipe the earphones with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, store the earphones in the provided carrying bag to protect them from dust and damage. The magnetic earbuds help prevent tangling.
  • Water Resistance: The earphones are waterproof. However, avoid prolonged exposure to water or submersion. Ensure the charging port cover is securely closed when not charging to maintain water resistance.
  • Neckband Care: The neckband is made of high-quality liquid silicone material, offering durability and resistance to deformation. Avoid sharp objects that could puncture or cut the silicone.
  • Temperature: Avoid exposing the earphones to extreme temperatures (hot or cold) as this can affect battery life and overall performance.

7. Troubleshooting

  • Cannot Power On: Ensure the earphones are fully charged. If the battery is completely drained, it may take a few minutes of charging before the device can power on.
  • Cannot Pair with Device:
    • Ensure the earphones are in pairing mode (indicator light flashing red and blue alternately).
    • Make sure Bluetooth is enabled on your device and it is within 10 meters of the earphones.
    • Turn off Bluetooth on other nearby devices that might be trying to connect.
    • Try restarting both the earphones and your device.
  • No Sound or Low Volume:
    • Check the volume levels on both the earphones and your connected device.
    • Ensure the earphones are properly paired and connected.
    • Try playing different audio sources to rule out an issue with the media file.
  • Call Quality Issues (ENC): While the earphones feature ENC for calls, ensure you are in a relatively quiet environment for optimal performance. Check microphone placement.
  • Intermittent Connection:
    • Ensure there are no physical obstructions between the earphones and your device.
    • Move away from other wireless devices (Wi-Fi routers, other Bluetooth devices) that might cause interference.
    • Ensure the earphones are within the 10m wireless range.

8. User Tips

  • For the best sound experience, ensure you select the correct size of ear tips for a snug fit.
  • Regularly clean the ear tips to maintain hygiene and sound quality.
  • Utilize the magnetic storage feature to keep your earphones tangle-free and secure when not in use.
  • The 15-hour play duration is excellent for long commutes or extended workout sessions. Remember to charge for 2 hours to get back to full power.

9. Warranty and Support

Your MZYMI BS09 ENC Neckband Wireless Earphones come with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer. If you encounter any issues or require technical assistance, please reach out to the seller or manufacturer's customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.