1. Introduction
The GEYA GRT8-B1 is an electronic off-delay time relay designed for various industrial and domestic applications where precise timing control is required. This device is suitable for functions such as pump decay time after heating shutdown or controlling fans. It features a wide voltage range, multiple time scales, and easy DIN rail mounting.
2. Product Overview
The GRT8-B1 is a compact, 1-module device designed for standard DIN rail installation. It features two potentiometers for time setting and percentage adjustment, along with LED indicators for operational status.
Figure 1: Front view of the GEYA GRT8-B1 Off Delay Time Relay.

Figure 2: Technical Parameter Diagram with labeled components.
- A1(+) S A2(-): Trigger Terminal and Supply Terminal
- Un: Supply LED Indicator (Green)
- R: Output LED Indicator (Red)
- Knob 1: 10 Time Range Selection
- Knob 2: Time Percentage Setting %
- GRT8-B1: Model Number
- 15 16 18: 1SPDT Output (16A/AC1) Terminals
3. Installation
3.1 Mounting
The GRT8-B1 is designed for standard 18mm DIN rail mounting. Ensure the DIN rail is securely fastened in a suitable enclosure.

Figure 3: DIN Rail Installation.

Figure 4: Dimensions of the GRT8-B1 relay (90mm x 18mm x 64mm).
3.2 Wiring Diagram
Refer to the following wiring diagrams for proper connection of the GRT8-B1. Ensure all connections are secure and comply with local electrical codes.

Figure 5: Delay Off Function & Wiring Diagram for GRT8-B1 and GRT8-B2.

Figure 6: Relay Wiring Example for GRT8-B1 AC230V (Turn off load after a period of time).
Wiring Steps:
- Connect the Live (L) and Neutral (N) wires to the appropriate power supply terminals (Un).
- Connect the trigger signal to terminal 'S'.
- Connect the load (e.g., lamp, contactor, heater, fans) to the output terminals (15, 16, 18) as per the desired normally open (NO) or normally closed (NC) configuration. For GRT8-B1, output is 1SPDT (1NO1NC).
- Ensure the voltage matches the selected model (AC/DC12-240V or AC230V).
4. Operating Instructions
4.1 Function: Delay Off (GRT8-B)
When the relay power is turned ON, the connected load will turn on simultaneously. The relay then starts delaying time. After reaching the set time, the load will turn off.
4.2 Time Setting
The GRT8-B1 features two potentiometers for setting the delay time:

Figure 7: How to Set Time using Knob 1 (Time Range) and Knob 2 (Percentage).
| Example Time | Knob 1 (Time Range) | Knob 2 (Percentage) |
|---|---|---|
| 5 minutes | 10m (1-10min range) | 50% |
| 15 minutes | 1h (1-10hr range) | 25% |
Time Ranges (Knob 1):
- 0.1-1s
- 1-10s
- 6-60s
- 1-10min
- 6-60min
- 1-10hr
- 0.1-1day
- 1-10day
- Only ON
- Only OFF
4.3 Indicator Light Explanation
The GRT8-B1 uses two LEDs to indicate its operational status:

Figure 8: Indicator Light Explanation.
- Green LED (Un): Indicates that the supply power is normally working (always ON).
- Red LED (R):
- Keep Flashing: The relay is in delay status.
- OFF: After reaching the set delay time, the Red LED will turn off.
5. Specifications
| Feature | Description |
|---|---|
| Model | GRT8-B1 |
| Function | Delay Off |
| Voltage Range | AC/DC12-240V or AC230V |
| Output Contact | 1SPDT (1NO1NC) or 2SPDT (2NO2NC) |
| Rated Current | 16A (AC1) |
| Time Scale | 0.1s - 10 days (divided into 10 ranges) |
| Mounting | 1 MODULE 18mm, DIN rail mounting |
| Dimensions (L x W x H) | 90mm x 18mm x 64mm |
| Material | PC |
| Color | White |
| Package Dimensions (L x W x H) | 10cm x 7cm x 2cm |
| Package Weight | 0.088 kg |
| Origin | Mainland China |
6. Maintenance
The GEYA GRT8-B1 is designed for reliable operation with minimal maintenance. However, regular checks can ensure optimal performance and longevity:
- Cleaning: Keep the relay free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Connections: Periodically check all wiring connections to ensure they are tight and secure. Loose connections can lead to intermittent operation or overheating.
- Environment: Ensure the operating environment is within suitable conditions to prevent damage to the electronic components.
- Visual Inspection: Inspect the relay for any signs of physical damage, discoloration, or burning, which may indicate a fault.
Always disconnect power before performing any maintenance or inspection.
7. Troubleshooting
If you encounter issues with your GRT8-B1 relay, consider the following troubleshooting steps:
- Relay not activating/deactivating:
- Check if the power supply (Un) is correctly connected and within the specified voltage range. The Green LED should be ON.
- Verify the trigger signal 'S' is correctly applied and functioning.
- Ensure the time setting (Knob 1 and Knob 2) is configured correctly and not set to "Only ON" or "Only OFF" unintentionally.
- Inspect wiring for loose connections or damage.
- Incorrect timing:
- Re-check the settings on both time potentiometers (Knob 1 for range, Knob 2 for percentage).
- Ensure the selected time range on Knob 1 is appropriate for the desired delay.
- Red LED (R) not flashing during delay:
- Confirm the relay is receiving power (Green LED ON) and a trigger signal.
- If the Red LED is constantly OFF, the delay might have already completed, or the relay is not entering the delay state.
If problems persist after following these steps, contact customer support for further assistance.
8. User Tips
- Test Settings: Before deploying the relay in a critical application, always test your time settings with a simple load to ensure it functions as expected.
- Voltage Compatibility: Double-check that the specific model you have (AC/DC12-240V or AC230V) matches your power supply to prevent damage.
- Clear Labeling: For complex setups, clearly label all wires and connections to simplify future maintenance or troubleshooting.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's specific terms and conditions or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
Manufacturer: GEYA Intelligent Manufacturing
Seller: ABHZ House Essential Thing Store