1. Introduction
Thank you for purchasing the DIVEDEER Window Cleaning Robot YTK-330. This intelligent device is designed to simplify window cleaning with its powerful suction, remote control operation, and anti-fall features. Please read this manual thoroughly before use to ensure safe and efficient operation.
2. Important Safety Information
- Always connect the safety rope when using the robot to prevent falling from high altitudes.
- Ensure the power cord is securely connected during operation. This product requires a continuous power connection and does not operate wirelessly.
- Keep the robot away from children and pets during operation.
- Do not use the robot on cracked or damaged glass surfaces.
- The remote control requires 1 pair of batteries (not included). Ensure batteries are correctly inserted.
3. Package Contents
Please check that all items are present in your package:
- 1 x Main Robot Unit
- 1 x Power Cord + Adapter
- 1 x Remote Control (color may vary, black or white)
- 2 Pairs of Cleaning Rings (4 pieces)
- 1 x 4-meter Extension Cable
- 1 x Spray Bottle
- 12 x Cleaning Cloths (for YTK-330 model)
- 1 x Product Manual (English)
4. Setup Guide
- Attach Cleaning Pads: Securely attach the cleaning cloths to the cleaning rings on the underside of the robot.
- Connect Power: Connect the power cord to the robot and then to a power outlet. Ensure the connection is firm.
- Attach Safety Rope: Always attach the safety rope to a secure anchor point before placing the robot on the window. This is crucial for safety.
- Initial Power-On: Press the power button on the robot. Wait approximately 20 seconds until the blue light stops flashing. This allows the robot to detect the glass surface and prepare for operation.


Video 1: Demonstration of attaching cleaning pads, connecting power, and initial setup.
5. Operating Instructions
5.1 Automatic Cleaning Mode
- After completing the setup steps and the blue light is solid (not flashing), the robot is in automatic cleaning mode.
- Place the robot on the window surface. It will automatically detect the edges and begin a cleaning pattern.
- The remote control is not active in automatic mode.
5.2 Manual Cleaning Mode
- If you wish to use manual control, first turn off the robot.
- Wait for 1-2 minutes.
- Turn on the robot and immediately press and hold the power button for 20 seconds. This will switch the robot into manual mode.
- Once in manual mode, you can use the remote control to direct the robot's movement.
5.3 Cleaning Tips
- For best results, lightly spray some water or a suitable window cleaning solution onto the edges of the cleaning mop pads before operation.

Video 2: Demonstration of the robot operating on a glass surface and remote control usage.
6. Maintenance
- Cleaning Cloths: After each use, remove the cleaning cloths from the rings and wash them. They are reusable. Ensure they are dry before reattaching.
- Robot Body: Wipe the robot's body with a soft, dry cloth. Do not use abrasive cleaners or immerse the robot in water.
- Storage: Store the robot in a cool, dry place away from direct sunlight when not in use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not start or move. | Not properly powered; Glass detection in progress. | Ensure power cord is securely connected. Wait 20 seconds after power-on for the blue light to become solid. |
| Remote control is unresponsive. | Robot in automatic mode; Remote control batteries are dead or missing. | Switch to manual mode (turn off, wait 1-2 min, restart, long-press power for 20s). Insert fresh batteries into the remote control. |
| Robot falls from the window. | Safety rope not attached; Insufficient suction. | Always attach the safety rope to a secure point. Ensure the glass surface is clean and dry for optimal suction. |
| Poor cleaning performance. | Dry cleaning pads; Dirty pads. | Lightly spray water or cleaning solution on the edges of the mop pads. Clean or replace dirty cleaning cloths. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | YTK-330 |
| Brand | DIVEDEER |
| Power (W) | <800W |
| Voltage | 100 - 240 V |
| Certification | CE |
| Origin | Mainland China |
| Suction Force | 2800Pa (per wheel) |
| Cleaning Speed | Approx. 4 min/m² |
| Motor Type | Brush Motor |
| Length | 31 cm |
| Width | 24 cm |
| Height | 17 cm |
| Weight | 2.339 kg |

9. Warranty and Support
The DIVEDEER Window Cleaning Robot YTK-330 comes with a 2-year warranty. We are committed to providing quality products and support.
- Fast Delivery & Refunds: We offer fast delivery and provide refunds for issues such as delayed delivery (with a $2.00 coupon code if delayed), lost packages, or damaged items.
- Free Returns: Enjoy free returns within 90 days of purchase.
- Certified Original: Our products are certified original.
- Security & Privacy: Your personal details are protected and not shared with third parties without your consent.
For any questions or assistance, please contact our customer support. We are here to help you with operation videos and any other inquiries.
10. User Tips
- Always ensure the safety rope is securely fastened to prevent accidental falls, especially when cleaning high windows.
- For optimal cleaning, lightly dampen the cleaning pads with water or a window cleaning solution before starting the robot. This helps in achieving a streak-free finish.
- Be patient during startup: The robot needs about 20 seconds to properly detect the glass surface and stabilize its suction. Wait for the blue light to stop flashing before expecting movement.
- If your remote control isn't working, first check its batteries. Remember, the remote only functions in manual mode.
- To switch from automatic to manual mode, turn off the robot, wait 1-2 minutes, then power it on and immediately press and hold the power button for 20 seconds.