Joyroom Universal Car Mount Phone Holder

Contents

Joyroom Universal Car Mount Phone Holder

Instruction Manual

1. Introduction

Thank you for choosing the Joyroom Universal Car Mount Phone Holder. This manual provides essential information for the proper installation, operation, and maintenance of your new car mount. Please read it carefully before use to ensure optimal performance and safety.

Joyroom car mount phone holder, front view
Figure 1: Joyroom Universal Car Mount Phone Holder

2. Package Contents

Please check the package for the following items:

  • 1 x Joyroom Universal Car Mount Phone Holder

3. Specifications

FeatureDetail
MaterialABS + Silica Gel
Compatible Phone Size4.7 - 6.8 inches
Rotation360° (Horizontal/Vertical Viewing)
Approximate Package Dimensions (L x W x H)13 cm x 11 cm x 7 cm
Approximate Package Weight0.186 kg
Car mount displaying compatible phone sizes (4.7-6.8 inches) and case compatibility
Figure 2: Compatible Phone Sizes and Case Fit

4. Setup Instructions

Follow these steps to properly install your car mount:

  1. Assemble the Mount: Attach the phone holder part to the adjustable arm. Ensure it is securely fastened.
  2. Choose Installation Location: Select a flat, clean surface on your dashboard or windshield. Ensure the bracket can sit flat on the instrument panel.
  3. Attach the Suction Cup: Place the suction cup base firmly on the chosen surface.
  4. Secure the Suction Cup: Press the base suction cup down to squeeze out all air. Then, press the locking button or lever to fully secure it.
  5. Adjust Viewing Angle: Use the adjustable arm and ball joint to set your desired viewing angle. The mount supports 360° rotation for both horizontal and vertical viewing.
Car mount holder being attached to the arm
Figure 3: Attaching the Phone Holder to the Arm
Close-up of the car mount's suction cup being pressed down to secure it
Figure 4: Securing the Suction Cup

5. Operating Instructions

Using the Joyroom car mount is designed for one-handed operation:

  1. Insert Phone: Gently place your phone into the bottom tray of the holder.
  2. Secure Phone: Press the side arms of the holder inwards. The holder features a one-touch trigger mechanism that automatically locks your phone securely in place.
  3. Adjust View: Rotate the phone holder to your preferred horizontal or vertical orientation. The 360° rotation allows for flexible viewing angles.
  4. Remove Phone: To remove your phone, press the release bar (or buttons) on the side of the holder to disengage the locking mechanism.
Close-up of the car mount's one-touch trigger and release bar for phone insertion/removal
Figure 5: One-Handed Operation for Phone Insertion/Removal
Phone securely held in the car mount on a dashboard, displaying navigation
Figure 6: Phone Securely Mounted with Navigation
Car mount showing 360-degree rotation capability with dimensions
Figure 7: 360-Degree Rotation for Optimal Viewing

Video 1: Product Demonstration - Installation and Usage

6. Maintenance

To maintain the performance and longevity of your car mount:

  • Clean the Suction Cup: If the suction cup loses its grip due to dust or dirt, wash the adhesive surface with water. Allow it to air dry completely before re-installation. Do not use harsh chemicals or abrasive materials.
  • General Cleaning: Wipe the mount with a soft, damp cloth to remove dust and smudges.
  • Avoid Extreme Temperatures: Do not expose the mount to prolonged direct sunlight or extreme cold, as this may affect the material and adhesive properties.

7. Troubleshooting

If you encounter issues with your car mount, try the following solutions:

  • Mount Not Sticking:
    • Ensure the installation surface is flat and clean.
    • Verify that the suction cup is pressed firmly to remove all air.
    • Confirm that the locking button/lever is fully engaged.
    • If the adhesive is dirty, wash it with water and let it dry completely before reapplying.
  • Phone Not Secure:
    • Ensure your phone is within the compatible size range (4.7-6.8 inches).
    • Make sure the side arms are fully engaged and locked around your phone.

8. User Tips

  • For optimal navigation visibility, adjust the mount to a position that does not obstruct your view of the road.
  • Periodically check the suction cup's adhesion, especially in varying temperature conditions, to ensure your device remains secure.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty information, please contact the seller or refer to the official Joyroom website. Keep your purchase receipt as proof of purchase.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.