Midea KJR-86J2/BK

Contents

Midea KJR-86J2/BK(WiFi) Central Air Conditioner Wire Controller User Manual

Model: KJR-86J2/BK

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Midea KJR-86J2/BK(WiFi) Central Air Conditioner Wire Controller. This device is designed to provide precise control over your Midea central air conditioning system, offering both local and remote (via WiFi) management of your indoor climate. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Midea KJR-86J2/BK(WiFi) Wire Controller in packaging

Figure 1: Midea KJR-86J2/BK(WiFi) Wire Controller and packaging.

2. Safety Information

  • Always disconnect power to the air conditioning unit before installing or servicing the controller.
  • Installation should be performed by a qualified electrician or HVAC technician.
  • Do not expose the controller to water or excessive moisture.
  • Do not attempt to disassemble or repair the unit yourself. Contact qualified service personnel.
  • Ensure all wiring connections are secure and comply with local electrical codes.

3. Package Contents

Verify that all items are present in the package:

  • 1 x Midea KJR-86J2/BK(WiFi) Wire Controller
  • 1 x User Manual (this document)
  • Mounting screws and anchors (may vary)

4. Specifications

FeatureSpecification
ModelKJR-86J2/BK(WiFi)
ConnectivityTwo-Core Wired, WiFi
OriginMainland China
High-concerned chemicalNone
Approx. Dimensions (L x W x H)10 cm x 10 cm x 20 cm
Approx. Weight0.7 kg

5. Setup

5.1 Mounting the Controller

  1. Choose a suitable location on an interior wall, away from direct sunlight, drafts, and heat sources.
  2. Ensure there is sufficient space for wiring and access.
  3. Carefully open the controller casing to access the mounting holes and wiring terminals.
  4. Mark the mounting points on the wall using the controller as a template.
  5. Drill pilot holes and insert wall anchors if necessary.
  6. Secure the controller's backplate to the wall using the provided screws.

5.2 Wiring Connection

The Midea KJR-86J2/BK(WiFi) controller uses a two-core wire connection to your central air conditioning unit. Refer to your air conditioner's manual for specific wiring terminal locations.

  1. IMPORTANT: Ensure power to the central air conditioning unit is completely disconnected at the circuit breaker before proceeding.
  2. Connect the two-core wire from your air conditioning unit to the designated terminals on the KJR-86J2/BK(WiFi) controller. Ensure polarity is correct if specified by your AC unit.
  3. Securely fasten all wire connections.
  4. Carefully reassemble the controller casing.

5.3 Initial Power On and WiFi Setup

  1. Restore power to the central air conditioning unit at the circuit breaker.
  2. The controller display should illuminate. Follow any on-screen prompts for initial setup.
  3. To enable WiFi functionality and remote control, locate the QR code displayed on the controller screen or in the manual.
  4. Download the official Midea AC control app (or specified app) on your smartphone.
  5. Open the app and follow the instructions to scan the QR code and connect the controller to your home WiFi network.
  6. Once connected, you should be able to control your air conditioner via the app.

6. Operating Instructions

The KJR-86J2/BK(WiFi) controller offers both manual control via its touchscreen interface and remote control via the mobile application.

6.1 Manual Operation (Touchscreen)

  • Power On/Off: Press the power button (usually indicated by a circle with a vertical line) to turn the unit on or off.
  • Temperature Adjustment: Use the up/down arrows to set your desired temperature.
  • Mode Selection: Press the "Mode" button (often indicated by a fan or snowflake icon) to cycle through available modes: Cool, Heat, Fan, Auto.
  • Fan Speed: Press the "Fan" button to adjust the fan speed (Low, Medium, High, Auto).
  • Other Functions: Depending on your specific AC unit and controller firmware, additional functions like timer settings, sleep mode, or swing control may be available via dedicated buttons or menu options.

6.2 Remote Operation (WiFi App)

Once the controller is successfully connected to your WiFi network and paired with the mobile app:

  • Open the Midea AC control app on your smartphone.
  • Select your KJR-86J2/BK(WiFi) controller from the device list.
  • The app interface will mirror the functions available on the physical controller, allowing you to adjust temperature, change modes, set fan speed, and access advanced features from anywhere with an internet connection.

7. Maintenance

  • Cleaning: Wipe the controller's screen and casing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray liquids directly onto the unit.
  • Firmware Updates: Periodically check the mobile app for any available firmware updates for your controller to ensure optimal performance and access to new features.
  • Battery (if applicable): This wired controller does not typically use user-replaceable batteries. If your model has a backup battery, consult a technician for replacement.

8. Troubleshooting

ProblemPossible CauseSolution
Controller display is blank.No power to the unit.Check the circuit breaker for the AC unit. Ensure wiring is correct and secure.
Cannot connect to WiFi.Incorrect WiFi password; controller too far from router; router issues.Verify WiFi password. Move controller closer to router or use a WiFi extender. Restart your router. Re-attempt WiFi setup via the app.
AC unit not responding to controller.Wiring issue; AC unit power off; communication error.Ensure AC unit has power. Check two-core wiring connections. Power cycle both the AC unit and the controller.
Temperature reading seems inaccurate.Controller location affected by external factors.Ensure the controller is not in direct sunlight, near heat sources, or in a draft.

9. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. However, general tips for smart thermostats include:

  • Optimize Scheduling: Use the app's scheduling features to pre-cool or pre-heat your space before you arrive home, saving energy.
  • Geofencing: If the app supports it, enable geofencing to automatically adjust temperature based on your proximity to home.
  • Regular Cleaning: Keep the screen clean for optimal touch responsiveness.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the Midea customer service department. Keep your purchase receipt as proof of purchase.

Manufacturer: Midea

Origin: Mainland China

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.