TX TX

Contents

TX 5500mw Mini Laser Engraver Instruction Manual

Model: TX

This manual provides detailed instructions for the safe and effective use of your TX 5500mw Mini Laser Engraver. Please read thoroughly before operation.

1. Product Overview

The TX laser engraver is a powerful and accurate 5.5W laser engraver designed for a range of engraving projects. It features smartphone app operation, a user-friendly interface, and fast carving speed. Its modular design, constructed with aluminum alloy and ABS, allows for easy and rapid assembly.

The device utilizes fixed-focus laser technology, an electric Z-axis, and a fixed-focus knob for swift and precise focusing. A high-power semiconductor laser with a wavelength of 450nm and compressed spot technology enables ultra-high precision engraving up to 0.03mm with a laser point as small as 0.08mm.

TX 5500mw Mini Laser Engraver
Figure 1: TX 5500mw Mini Laser Engraver

2. Safety Information

WARNING: Laser radiation can cause eye damage and skin burns. Always wear appropriate laser safety glasses during operation. Never look directly into the laser beam. Keep children and pets away from the device during operation.

  • Ensure the work area is well-ventilated to dissipate fumes from engraved materials.
  • Do not engrave highly reflective, transparent, or flammable materials without proper precautions.
  • Always disconnect power before performing any maintenance or cleaning.

3. Package Contents

Your TX 5500mw Laser Engraving Machine package should include:

  • TX Laser Engraver Unit
  • Power Adapter (12V 3A)
  • USB Type-C Data Cable
  • User Manual (this document)
  • (Other accessories may vary based on specific package)

4. Component Identification

Labeled parts diagram of the laser engraver
Figure 2: Component Diagram
  1. Z+ button: Click to move up 0.5mm. Long press to move up continuously.
  2. Home button: Long press to return to the origin.
  3. Z- button: Click to move down 0.5mm. Long press to move down continuously.
  4. Power interface: Connects to the 12V 3A power adapter.
  5. Power on button: Press to turn the device on/off.
  6. Type-C interface: Connects to your computer for data transfer.
  7. Reset button: Resets the device.
  8. Laser Module: The laser emitting component.
  9. Bottom scale plate: Metal plate with precision scale for accurate positioning.
  10. Fan: Cooling fan for the laser module.
  11. Focus Knob: Manual adjustment for laser focus.

5. Setup Instructions

5.1 Assembly

The TX engraver features a modular design for easy assembly. Refer to the diagram below for guidance.

Exploded view and assembly diagram of the laser engraver
Figure 3: Assembly Diagram

Attach the side panels and the top cover to the base plate. Ensure all connections are secure.

5.2 Software Installation

The TX engraver supports various operating systems and software:

  • Supported Systems: Windows 7/8/10/11, Mac OS, Android
  • Operating Applications: LaserGRBL, LightBurn, Cell phone APP engraving software

Download and install the appropriate software for your operating system from the manufacturer's website or app store. For mobile devices, search for the dedicated engraving app.

Software compatibility for Android, iOS, Mac, LaserGRBL, and Lightburn
Figure 4: Software Compatibility

5.3 Connecting the Device

  1. Connect the power adapter to the power interface (DCO44B) on the engraver and plug it into a power outlet.
  2. Connect the USB Type-C data cable from the engraver to your computer or mobile device.
  3. Press the power on button to turn on the device.

5.4 Focusing the Laser

The engraver uses a fixed-focus laser with a fixed focus distance of 3mm. To achieve optimal focus:

  1. Place your material on the bottom scale plate.
  2. Adjust the height of the laser module using the Z+ and Z- buttons until the laser module is approximately 3mm above the material surface.
  3. Fine-tune the focus using the Focus Knob. Rotate the knob until the laser spot is at its smallest and sharpest point on the material.
Diagram showing the focusing mechanism with the focus knob
Figure 5: Focusing Mechanism

6. Operating Instructions

6.1 Preparing Your Design

The engraver supports various image formats and engraving modes:

  • Image Formats: JPG, BMP, PNG, GCODE, SVG, PLT, DXF, NC
  • Engraving Modes: Select photo from gallery, engrave directly after taking a photo, drawing graphic engraving, enter text to engrave.
Various engraving modes including photo, drawing, and text engraving
Figure 6: Engraving Modes
Supported file formats (JPG, JPEG, GIF, BMP, PNG, GCODE, SVG, PLT, DXF, NC) and software (GRBL Laser, Lightburn)
Figure 7: Supported Formats and Software

Use your chosen software (LaserGRBL, LightBurn, or mobile app) to import or create your design. Adjust engraving parameters such as power, speed, and passes according to your material and desired effect.

6.2 Material Compatibility

The TX engraver can engrave on a wide range of materials:

  • Painting metal
  • Dark glass
  • Colored ceramics
  • Wood
  • Bamboo
  • Leather
  • Paper
  • Fruits
  • Food items
  • Plastic
  • Acrylic
  • Stone
  • Fabric
Examples of materials that can be carved: Leather, Rubber, Plastic, Bamboo, Paper, Wood, Ceramic, Glass, Painted metal
Figure 8: Compatible Materials

6.3 Starting the Engraving Process

  1. Place the material securely on the bottom scale plate.
  2. Ensure the laser is properly focused (refer to Section 5.4).
  3. In your engraving software, confirm the design position and parameters.
  4. Initiate the engraving process from the software.
  5. Monitor the engraving process closely.

6.4 Control Buttons

  • Z+ button: Moves the laser module up.
  • Z- button: Moves the laser module down.
  • Home button: Returns the laser module to its origin point.

7. Maintenance

7.1 Cleaning

  • Regularly clean the laser lens with a soft, lint-free cloth and lens cleaning solution to ensure optimal performance.
  • Wipe down the exterior of the machine with a dry or slightly damp cloth.
  • Clear any debris or dust from the engraving area and fan vents.
  • Always disconnect power before cleaning.

7.2 Laser Module Care

  • Avoid touching the laser lens directly.
  • Ensure the fan is free from obstructions to prevent overheating of the laser module.
  • If the laser output appears weak or inconsistent, check the lens for cleanliness and refocus.

8. Troubleshooting

8.1 Common Issues and Solutions

  • No Power: Check power adapter connection and ensure the power outlet is functional.
  • Laser Not Firing: Verify software settings, ensure the laser module is properly connected, and check for any error messages in the software.
  • Poor Engraving Quality:
    • Blurry Engraving: Re-focus the laser (Section 5.4).
    • Weak Engraving: Increase laser power or reduce engraving speed in software. Ensure the material is compatible.
    • Inconsistent Engraving: Check for loose connections, ensure the material is flat and stable, and clean the laser lens.
  • Software Connection Issues: Ensure the USB Type-C cable is securely connected and the correct COM port is selected in your software. Restart both the engraver and your computer/device.
  • Chromatic Aberration: Be aware that different lighting environments during image capture can cause chromatic aberration, affecting how colors appear in engraved images. Adjust image settings in software if necessary.

9. Specifications

FeatureSpecification
MaterialABS + Aluminum alloy
Control MethodPWM
Support SystemWin7/Win8/Win10/Win11 /Mac/OS/Android
Processing MaterialPaper veneer, Wood veneer, Plastic, Leather, Fabric, Bamboo, Painting metal, Dark glass, Colored ceramics, Fruits, Food items, Acrylic, Stone
Interface SpecificationLacquerpower port: DCO44B, Data port: USB Type C
Engraving Area85*85mm
Laser Optical Power5500mW (5.5W)
Image FormatJPG/BMP/PNG/GCODE/SVG/PLT/DXF/NC
Power Supply12V 3A
Fixed Focus Distance3mm
Operating ApplicationsLaserGRBL/LightBurn/Cell phone APP engraving software
Product Weight2kg
Dimensions (L*W*H)222*203*194mm
Compressed Spot Size0.08mm
Engraving PrecisionUp to 0.03mm
Key features of the 5.5W laser engraver: High Precision, 5.5W High Power Laser, Quick Engraving, 0.08mm Compressed Spots, Versatile Software Compatibility, Z-Axis Manual Knob
Figure 9: Key Features
Detailed specifications table for the laser engraver
Figure 10: Detailed Specifications

10. User Tips

  • Material Testing: Always perform small test engravings on scrap material before starting a large project to find the optimal power and speed settings.
  • Protective Eyewear: Even with safety features, always wear certified laser safety glasses to protect your eyes from stray reflections.
  • Engraving Metal: The engraver is specified for 'painting metal'. For engraving on raw steel or other unpainted metals, ensure the material is pre-treated with a laser marking spray or paint designed for this purpose, as direct engraving on many metals is not possible with this type of laser.
  • Ventilation: Ensure adequate ventilation in your workspace, especially when engraving materials that produce smoke or fumes.
  • Software Updates: Keep your engraving software updated to the latest version for best performance and compatibility.

11. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.