Introduction
Thank you for choosing the XUNFOX H8 Wireless Bluetooth Gaming Mouse. This high-performance mouse is designed for versatility and precision, featuring three connection modes (2.4G wireless, Bluetooth, and wired), a lightweight ergonomic design, and advanced macro definition capabilities. Equipped with a PAW3311 sensor, it offers up to 12000 DPI for an exceptional gaming and work experience. This manual provides detailed instructions to help you set up, operate, and maintain your mouse for optimal performance.

Figure 1: XUNFOX H8 Gaming Mouse - Three Modes and Macro Definition
Setup
The XUNFOX H8 mouse supports three connection modes: 2.4G wireless, Bluetooth, and wired. Choose the mode that best suits your needs.
1. Mode Selection
Locate the three-speed mode switch on the bottom of the mouse (Figure 2) to select your desired connection type: 2.4G, OFF, or BT.

Figure 2: Three Connection Modes (2.4G, Bluetooth, Wired)
2. 2.4G Wireless Connection
- Insert the USB receiver into an available USB port on your computer.
- Turn the bottom toggle switch of the mouse to "2.4G".
- The red light on the mouse will flash, indicating it's searching for the receiver.
- Wait for a moment; the mouse will connect automatically.
3. Bluetooth Connectivity
- Turn the toggle switch at the bottom of the mouse to "BT".
- The blue light will flash, indicating it's in pairing mode.
- On your computer or device, search for Bluetooth devices and select "H8 Mouse" to pair.
- For reconnecting or pairing with a new device, long press the pairing button on the right side of the mouse bottom shell (Figure 3). The blue light will flash to pair.
4. Wired Mode
Connect the Type-C cable to the mouse and the USB-A end to your PC. The mouse will automatically switch to wired mode and begin charging. This mode allows for simultaneous use and charging.

Figure 3: Mouse Bottom Layout with Mode Switch and Pairing Button
5. Charging the Mouse
The XUNFOX H8 mouse features a built-in 300mA rechargeable battery. Connect the mouse to your computer or a USB power adapter using the provided Type-C cable. The mouse can be used while charging in wired mode.

Figure 4: Charging the XUNFOX H8 Mouse via Type-C
Operating Instructions
1. DPI Adjustment
The mouse features 6 adjustable DPI settings: 1200, 2400, 3200, 6600, 9600, and 12000 DPI. Short press the DPI switch button (located on the bottom of the mouse, as shown in Figure 3) to cycle through these settings. This allows you to quickly adjust cursor sensitivity to match your task or game.

Figure 5: PAW3311 Sensor and DPI Settings
2. Macro Definition
The XUNFOX H8 mouse supports macro definition, allowing you to program complex sequences of actions to a single button press. This feature is ideal for gaming, enabling "one click release of ultimate moves." Please refer to the accompanying software (if available, typically downloadable from the manufacturer's website) for detailed instructions on how to set up and customize macros.

Figure 6: Macro Definition Feature
3. Return Rate (Polling Rate)
The mouse offers a 4-tier return rate (polling rate) of 125Hz, 250Hz, 500Hz, and 1000Hz. A higher return rate means faster communication between the mouse and your computer, resulting in smoother and more responsive cursor movement. The specific method to adjust the return rate is typically found within the mouse's customization software.
4. Customization with PU Stickers
The XUNFOX H8 mouse comes with optional PU stickers, allowing you to personalize its appearance. Carefully peel and apply the stickers to the designated areas on the mouse body according to your preference. Ensure the surface is clean and dry before application for best adhesion.

Figure 7: Applying PU Stickers for Customization
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the mouse surface. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid using harsh chemicals or abrasive materials.
- Sensor Care: Keep the optical sensor on the bottom of the mouse clean and free from dust or debris to ensure accurate tracking.
- Battery Care: To prolong battery life, avoid fully discharging the mouse frequently. Charge it when the battery indicator suggests low power. Store the mouse in a cool, dry place when not in use for extended periods.
- Storage: When not in use, especially during travel, consider storing the mouse in a protective pouch to prevent scratches or damage.
Troubleshooting
- Mouse not responding:
- Ensure the mouse is charged.
- Check the mode switch on the bottom of the mouse (2.4G, BT, or Wired).
- For 2.4G mode, ensure the USB receiver is securely plugged in.
- For Bluetooth mode, ensure Bluetooth is enabled on your device and the mouse is paired. Try re-pairing if necessary.
- In wired mode, ensure the Type-C cable is securely connected to both the mouse and the computer.
- Intermittent connection:
- Move the mouse closer to the receiver/device to reduce interference.
- Avoid using the mouse near other strong wireless signals (e.g., Wi-Fi routers, other wireless devices).
- Ensure the battery is sufficiently charged.
- DPI not changing:
- Ensure you are short-pressing the DPI switch button on the bottom of the mouse.
- If using customization software, check its settings.
- Cursor movement is erratic:
- Clean the optical sensor on the bottom of the mouse.
- Ensure you are using the mouse on a suitable surface (non-reflective, uniform color).
Specifications

Figure 8: XUNFOX H8 Mouse Dimensions and Key Specifications
| Feature | Detail |
|---|---|
| Model Name | H8 (Three modes mouse) |
| Colors | Black, White |
| Dimensions (L x W x H) | 119mm x 62mm x 40mm |
| Weight | ≈55g |
| Battery Capacity | 300mA |
| Number of Buttons | 6 |
| Charging Port | Type-C |
| Connection Modes | 2.4G Wireless, Bluetooth, Wired |
| Rated Voltage | 3.7V |
| Rated Current | 9mA |
| Sensor Model | Pixart 3311 |
| DPI Settings | 1200-2400-3200-6600-9600-12000 (6 steps) |
| Return Rate | 125-250-500-1000Hz (4-tier) |
| Operation Mode | Opto-electronic |
| System Compatibility | Windows XP, Mac OS, Win/7/8/10/11 and above |
User Tips
No specific user tips were available from reviews or Q&A for this product. However, general tips for gaming mice include:
- Experiment with different DPI settings to find what works best for your game or task. Lower DPI is often preferred for precision aiming, while higher DPI is good for quick movements.
- Utilize the macro definition feature to automate repetitive tasks or complex in-game actions, saving time and improving efficiency.
- Keep your mouse pad clean for optimal sensor performance.
- Regularly check for firmware updates from the manufacturer's website to ensure your mouse has the latest features and bug fixes.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.