1. Introduction
Thank you for purchasing the SloMiBug ID Card Voice Recorder. This compact and versatile device functions as a professional digital voice recorder, an MP3 player, and can be conveniently worn as an ID card. It features voice-activated recording, noise reduction, and various storage capacities to meet your needs. Please read this user guide carefully before use to ensure proper operation and to maximize the device's lifespan.
Figure 1.1: ID Card Voice Recorder with creative design, easy card placement.
Video 1.1: Unboxing and overview of the ID Card Voice Recorder's physical features.
2. Safety Precautions
- This machine must be charged with 5V voltage. Using 9V fast charging may cause the machine to burn out.
- If you need to read data from the device, please use the original data cable. Other data lines may not connect properly.
- When charging or connecting to a computer, ensure the switch is in the "OFF" position. When unplugging, wait until the indicator light is off.
- After recording, always turn the switch to the "OFF" position to save the recording file. Failure to do so may result in data loss.
- Use a power adapter with a charging current of 1A or less. Higher currents may damage the unit. (Note: This product does not include a standard power adapter).
- The device has an intelligent reset system. Always save recording files before connecting to a computer. Due to high recording quality and parameters, files can be large; extract them promptly. The company is not responsible for data loss.
3. Product Overview
The ID Card Voice Recorder is designed for ease of use and portability. Below are its key components and features:
3.1. Physical Features
- ID Card Design: Lightweight and designed to be worn as an ID card, allowing discreet recording.
- Control Buttons: Simple one-click operation for recording and mode switching.
- USB Port: For charging and data transfer.
- Earphone Jack: For playback and configuration.
Figure 3.1: The device can be used as a work card for convenient recording.
Figure 3.2: Side view illustrating the one-click operation buttons for recording modes.
3.2. Key Features
- One-Click Recording: Simple and quick to start recording.
- Digital Noise Reduction: Built-in DSP chip for clear audio.
- Voice-Activated Recording: Automatically records when sound is detected, saving storage space.
- Timestamp Record: Recording files are named with the correct time after synchronization.
- Intelligent Segmentation: Records in segments (e.g., every 5 hours) for easier file management.
- Intelligent Loop Recording: Automatically overwrites the earliest files when memory is full.
- Power-Off Save: Automatically saves recordings when power is low.
- MP3 Playback: Supports WAV, MP3, WMA formats.
- Mobile Data Storage: Functions as a USB flash drive.
- Recording Encryption Protection: Protects confidential information.
Figure 3.3: Illustration of the built-in DSP noise reduction chip.
Figure 3.4: Recording encryption protection for confidential data.
4. Setup and Basic Operation
4.1. Power ON/OFF
The device features two models for power control:
- Model 1: Slide switch to "ON" to power on, slide to "OFF" to power off.
- Model 2: Push button down to "ON" to power on, push up to "OFF" to power off.
Figure 4.1: Diagram showing ON/OFF switch positions for different models.
4.2. Charging the Device
- Ensure the device is in the "OFF" position.
- Connect the device to a 5V/1A (or less) USB power source using the original data cable.
- The recorder will flash a red light during charging.
- Once fully charged, the recorder will show a solid blue light.
4.3. Time Synchronization
To ensure your recording files have the correct timestamp:
- Connect the recorder to your computer.
- Open the device's disk drive. You will find a folder named `<SET TIME.exe>`.
- Copy this folder to your desktop.
- Open the folder and double-click `SET TIME.exe`.
- Confirm that your computer's time is accurate, then click "Set Time" within the application.
- A successful synchronization means future recording files will be named with the correct time.
Note: If you need to format the machine, please back up the `<SET TIME.exe>` folder to prevent loss.
5. Recording Functions
5.1. Start Recording
Do not plug in earphones when starting a recording.
- Push the switch to the "ON" position. The red light will flash a few times and then go off, indicating recording has started.
Important: Do not connect the device to a computer during recording, as this will cause the recording file to be lost.
5.2. Saving Recording
- Push the switch to the "OFF" position. The device will automatically save the recording and power off.
5.3. Voice Activated Recording
This feature allows the recorder to start recording automatically when sound is detected and pause when silent, saving storage space.
- To Turn On: During pause state, long press the "-" key for 3 seconds. The indicator light will flash blue several times quickly.
- To Turn Off: During pause state, long press the "-" key for 3 seconds. The indicator light will flash red several times quickly.
Once voice-activated recording is turned on, it will function without earphones. The device will restart (blue light flashes) to confirm the setting.
Figure 5.1: Intelligent Voice Control feature, recording only when sound is present.
5.4. Long Recording (Low Sampling)
This mode saves memory space by using a lower recording sampling rate.
- To Turn On: During pause state, long press the "+" key for 3 seconds. The indicator light will flash blue several times quickly.
- To Turn Off: During pause state, long press the "+" key for 3 seconds. The indicator light will flash red several times quickly.
After turning on long recording, the device will restart (blue light flashes) without earphones, indicating the super long recording mode is active.
5.5. Intelligent Segmentation
The device can save recordings in segments (e.g., every 5 hours) to make files easier to manage and search.
Figure 5.2: Segmented recording function, automatically saving files at set intervals.
5.6. Intelligent Loop Recording
When the memory is full, the device automatically detects the storage space and overwrites the earliest recorded audio with new recordings.
Figure 5.3: Diagram illustrating the intelligent loop recording process.
6. Playback Functions
To use playback functions, plug in the adapter earphones.
- Plug in the adapter earphones.
- Push the switch to the "ON" position to enter music play mode.
6.1. Music/Recording Switch
- Lightly press the "Play/Pause" button to switch between music playback and recording playback.
6.2. Volume Adjustment
- During playback, long press the "+" key to increase volume.
- During playback, long press the "-" key to decrease volume.
6.3. Track Switching
- During playback, lightly press the "+" key for the next track.
- During playback, lightly press the "-" key for the previous track.
6.4. Pause Function
- During playback, long press the "Play/Pause" button to enter pause state (red and blue lights flash alternately).
- Press the "Play/Pause" button again to exit pause.
6.5. Fast Forward and Rewind
This function requires restarting the machine to set.
- Plug in earphones and push the switch to "ON".
- Press the "+" key and release your hand until playback starts.
- Press the "+" key to fast forward.
- Long press the "-" key to rewind.
Note: You need to set this every time you want to use it. There is no volume adjustment in this state.
6.6. Deleting Files
During pause state, long press the "-" key. Release your hand after the purple light flashes to enter delete state (flashing purple light).
- Lightly press "Play/Pause" to delete the currently playing file (blue light flashes).
- Long press "Play/Pause" to delete all files (red light flashes).
- Lightly press "+" to exit delete mode.
Note: In recording status, deleting means deleting all recordings. In music play status, deleting means deleting all music.
7. Data Transfer and Storage
7.1. Connecting to Computer
The device functions as a mobile data storage device when connected to a computer.
- Ensure the device is in the "OFF" position before connecting.
- Use the original USB data cable to connect the recorder to your computer.
- The device should appear as a removable disk.
Figure 7.1: Connecting the recorder to a laptop for mobile data storage.
7.2. Mobile Phone OTG Connection
Android phones that support OTG function can play and manage files on the recorder directly without complicated conversion.
Figure 7.2: Connecting the recorder to an Android phone via OTG.
8. Troubleshooting (Q&A)
8.1. Suddenly unable to record:
Solution: Back up important files and format the device on your computer. If it works normally after formatting, clean your computer regularly. This issue can be caused by computer virus infection, rendering the recorder unusable and potentially causing irreparable damage over time.
8.2. Indicator light has no response or is always on in an abnormal state:
Solution: Back up important files, then restore factory settings. Connect to your computer, go to 'My Computer', find the mobile drive letter, right-click, select 'Format', and then 'Quick Format'. This should restore factory settings and resolve most faults.
8.3. No response after connecting to the computer via the data cable:
Solution: Reconnect the computer (check if the plug is inserted correctly). If the removable disk is still not found, try connecting to a different computer. Some computers may not recognize the device due to missing drivers. If the issue persists (recorder always red or blue), contact customer support for a firmware upgrade.
8.4. Earphones are on but not entering play state:
Solution: Insert earphones, turn the switch to "ON". After the light goes out, turn the switch back to "OFF". When you see the red light, turn the switch to "ON" again. This sequence should initiate playback.
9. Specifications
| Attribute | Value |
|---|---|
| Product Type | Voice Recorder |
| Model Number | ID Card Voice Recorder |
| Dimensions (WxHxD) | 85*53*3mm (Inner core size: 85x54mm, Device size: 60×102×7.5mm) |
| Product Weight | 48g |
| Recording Method | One-key recording, Power on recording, power off saving |
| Voice Activated Recording | Yes |
| Record Audio Format | WAV |
| Recording Bit Rate | 192KBPS |
| Sampling Rate | 48KHz |
| Playback Formats | MP3/WMA/WAV |
| External Microphone | No |
| With Speakers | No |
| External Memory | No |
| Transmission Interface | USB 2.0 (Type-C fast charge) |
| Microphone | Two-way |
| Video Shooting | Not supported |
| Battery Type | Environmentally friendly polymer lithium battery |
| Charging Time | 3 hours |
| Recording Time (Full Charge) | Up to 150 hours |
| Capacity Options | 4GB, 8GB, 16GB, 32GB, 64GB |
| Storage Duration (approx.) | 4GB: 48 hours, 8GB: 96 hours, 16GB: 192 hours, 32GB: 384 hours |
| Shell Material | Special ABS+fiber rope/ABS |
| Certification | CE |
Figure 9.1: Detailed product specifications.
10. User Tips
- Always use the provided original data cable for connecting to a computer to avoid connectivity issues.
- Regularly back up your recordings to prevent data loss, especially before formatting or troubleshooting.
- For optimal performance and to prevent damage, ensure you use a 5V/1A charger.
- If you experience any issues, try restoring factory settings as a first step after backing up your data.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the seller directly through the platform where the product was purchased. Keep your purchase receipt or order details handy for any claims.
A detailed user manual in PDF format is also available for download: View User Manual (PDF).