Introduction
The SOOCAS W3 Pro Water Flosser is an advanced oral irrigator designed to provide comprehensive and delicate cleaning for your mouth. It features multiple modes and specialized nozzles to cater to various oral hygiene needs, including standard cleaning, gum protection, and targeted cleaning for braces. This manual provides detailed instructions for safe and effective use of your device.
Image: SOOCAS W3 Pro Water Flosser with its packaging and included nozzles.
Package Contents
Please check the package to ensure all items are present:
- SOOCAS W3 Pro Water Flosser unit
- Standard Nozzle
- Orthodontic Nozzle
- Periodontal Pocket Nozzle
- Tongue Coating Nozzle
- Nozzle Storage Box
- Type-C Charging Cable
- User Manual (this document)
Image: All components included in the SOOCAS W3 Pro Water Flosser package.
Setup
- Charge the Device: Before first use, fully charge the water flosser using the provided Type-C charging cable. The charging time is approximately 4 hours.
- Install Nozzle: Select the desired nozzle (Standard, Orthodontic, Periodontal Pocket, or Tongue Coating) and firmly insert it into the nozzle port on the top of the flosser until it clicks into place.
- Fill Water Tank: Detach the water tank from the main unit. Fill the 240mL water tank with lukewarm water. Reattach the water tank securely to the main unit.
Image: Visual guide for installing the nozzle, filling the water tank, and selecting a mode.
Operating Instructions
The SOOCAS W3 Pro offers 3 main modes with a total of 7 intensity gears to suit various oral care needs.
Image: Device controls for mode and gear adjustment.
1. Mode and Gear Selection:
- Press the "Mode/Gear Adjustment Button" to cycle through the 3 main modes:
- Standard Mode: For daily cleaning. Offers weak, medium, and strong intensity.
- Gum Protection Mode: Gentle cleaning for sensitive or inflamed gums. Offers weak, medium, and strong intensity.
- Burst Mode (Point Shooting): Dedicated for braces and stubborn stains.
- Each main mode (Standard, Gum Protection) has 3 intensity gears. The Burst mode is a single intensity.
- Select your desired mode and intensity before turning on the device.
2. Flossing Procedure:
- Place the nozzle perpendicular to your gum line.
- Slightly close your mouth around the nozzle to prevent splashing, but allow water to drain from your mouth into the sink.
- Press the "Switch button" to turn on the device.
- Guide the water jet along your gum line, pausing briefly between teeth.
- Clean both the front and back surfaces of your teeth.
- For the tongue coating nozzle, gently scrape the tongue surface from back to front.
- The 360° rotatable nozzle allows for flexible cleaning in all directions.
Image: Proper technique for using the water flosser.
3. Nozzle Specific Usage:
- Standard Nozzle: Ideal for general daily cleaning, effectively removing food residues and plaque from between teeth and along the gum line.
- Orthodontic Nozzle: Features a fine-bristle brush to clean around braces and wires, removing trapped food particles and bacteria.
Image: Orthodontic nozzle with brush for cleaning braces.
- Periodontal Pocket Nozzle: Designed for sensitive teeth, inflamed gums, or periodontal disease. Use with Gum Protection Mode for a gentle yet effective clean.
Image: Periodontal pocket nozzle for gentle gum care.
- Tongue Coating Nozzle: Used to clean bacteria and debris from the surface of the tongue, helping to prevent bad breath.
Image: Tongue coating nozzle for fresh breath.
Video: A dentist demonstrates the SOOCAS W3 Pro Water Flosser, explaining its various modes and specialized nozzles for different oral care needs.
Maintenance
- Cleaning the Water Tank: The 240mL water tank is detachable for easy cleaning. Regularly remove and clean the tank to prevent the buildup of transparent, sticky, or slippery film, which is residue from bacteria.
Image: Illustration of the detachable water tank for easy cleaning.
- Cleaning the Nozzles: After each use, rinse the nozzle under running water. Store nozzles in the provided nozzle storage box to keep them clean and hygienic, preventing bacterial adhesion.
Image: Nozzle storage box for hygienic keeping.
- Cleaning the Main Unit: The device is IPX7 waterproof, allowing it to be fully washed under running water. Ensure the charging port cover is securely closed before washing.
- Battery Care: To prolong battery life, avoid completely draining the battery frequently. Charge the device when the battery indicator is low.
Troubleshooting
If you encounter any issues with your SOOCAS W3 Pro Water Flosser, please refer to the following common solutions:
- Device not turning on: Ensure the device is fully charged. If the battery is low, connect it to the Type-C charger for approximately 4 hours.
- Weak water pressure or no water flow:
- Check if the water tank is properly filled and securely attached.
- Ensure the nozzle is correctly installed and not clogged.
- Verify that the selected mode and gear are appropriate.
- Water leakage: Ensure the water tank is securely attached and the nozzle is firmly inserted.
If the problem persists, please contact customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model | W3 Pro |
| Product Size (with packaging) | 221 x 59 x 232 mm |
| Modes | 3 (Standard, Gum Protection, Burst/Point Shooting) |
| Intensity Gears | 7 (3 for Standard, 3 for Gum Protection, 1 for Burst) |
| Nozzle Types | Standard, Orthodontic, Periodontal Pocket, Tongue Coating (4 types) |
| Pulse Frequency | 1300 pulses/minute |
| Fine Nozzle Diameter | 0.6mm |
| Water Tank Capacity | 240ml |
| Power Source | Rechargeable Battery |
| Charging Type | Type-C |
| Charging Time | About 4 hours |
| Use Time | About 80 days (based on typical usage) |
| Waterproof Rating | IPX7 |
| Certifications | 3C, CE, FDA Food Grade |
Image: Detailed product parameters and components.
Image: FDA food grade material safety certification documents.
User Tips
- For optimal oral hygiene, remember that water flossing complements, but does not replace, regular toothbrushing.
- If you have sensitive gums or are new to water flossing, start with the Gum Protection Mode at a lower intensity and gradually increase as your gums adapt.
- Utilize the dedicated nozzle storage box to keep your nozzles clean and organized, preventing contamination.
- The detachable water tank is a key hygiene feature; make sure to clean it regularly to avoid bacterial buildup.
- When using the orthodontic nozzle, ensure the fine-bristle brush effectively reaches around your braces to dislodge food particles.
- For fresh breath, incorporate the tongue coating nozzle into your routine to clean the surface of your tongue.
Warranty and Support
The SOOCAS W3 Pro Water Flosser comes with a 1-year local warranty. For any product issues, warranty claims, or technical support, please contact the seller or authorized service center. Ensure you retain your proof of purchase for warranty validation.
If you have any questions or encounter problems, please reach out to the seller directly for assistance.
