Jikong JK-BD4A8S6P

Contents

JK-BD4A8S6P 4S-8S Smart BMS Instruction Manual

Model: JK-BD4A8S6P

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Jikong JK-BD4A8S6P 4S-8S Smart Battery Management System (BMS). This intelligent protection board is designed for 12V to 24V LiFePO4 battery packs, offering robust protection, active current balancing, and convenient monitoring via a dedicated mobile application.

Jikong JK-BD4A8S6P 4S-8S 60A Smart BMS unit with balance wires
Figure 1: Jikong JK-BD4A8S6P 4S-8S 60A Smart BMS with included balance wires.

2. Product Features

The JK-BD4A8S6P Smart BMS offers a range of advanced features for optimal battery management:

  • Cell Configuration: Supports 4S to 8S battery packs.
  • High Current Capacity: 60A continuous discharge current.
  • Active Balancing: Features 0.4A active current balancing to equalize cell voltages and extend battery life.
  • Bluetooth Connectivity: Built-in Bluetooth module for wireless monitoring and parameter adjustment via a mobile APP.
  • Comprehensive Protection: Includes protection against overcharge, over-discharge, overcurrent, short-circuit, and overtemperature.
  • Battery Compatibility: Compatible with Li-ION, LiFePO4, and LTO battery types.
  • Modular Design: Incorporates various modules such as RS485, LCD, GPS interface, heating module, parallel module, alarm module, and NTC temperature sensors (some features may require external modules or specific configurations).

3. Package Contents

Upon unpacking, please verify that all items are present:

  • 1x JK-BD4A8S6P Smart BMS Unit
  • 1x Set of Balance Wires (red)
  • Mounting Screws (typically included)
Jikong JK-BD4A8S6P Smart BMS unit, balance wires, and mounting screws
Figure 2: Typical package contents including the BMS unit, balance wires, and screws.

4. Specifications

4.1. General Specifications

Serial NumberParameterValueUnit
1Supply voltage10-36V
2Operating power consumption≤900mW
3Operating temperature-30 to 70°C
4Maximum number of collection strings8String
5Maximum balancing current0.4A
6Maximum charging current40A
7Maximum discharge current40A
8Maximum instantaneous current80A
9Maximum internal loop resistance1.3mΩ
10Protective plate size120.5*73*16.48mm

4.2. Protection Parameters

NUMPARALI-IONLIFEPO4LTOUnit
1Balancing initial voltage332V
2Maximum balancing current0.40.40.4A
3Unit overcharge voltage4.23.62.7V
4Single overcharge protection recovery4.183.552.65V
5Monomer undervoltage protection2.822.61.8V
6Single undervoltage protection recovery2.852.651.85V
7Automatic shutdown voltage2.82.51.7V
8SOC-0% voltage2.92.61.85V
9SOC-100% voltage4.183.52.65V
10Trigger balancing differential pressure0.010.010.01V
11Charging overcurrent protection delay303030S
12Charge overcurrent protection release time606060S
13Discharge overcurrent protection delay300300300S
14Discharge overcurrent protection release time606060S
15Short-circuit protection delay150015001500µS
16Short circuit protection release time606060S
17Charging overtemperature protection temperature707070°C
18Charge overtemperature restore temperature606060°C
19Discharge overtemperature protection temperature707070°C
20Discharge overtemperature recovery temperature606060°C
21Charging low temperature protection temperature-20-20-20°C
22Charge low temperature to restore temperature-10-10-10°C
23MOS Overtemperature protection temperature100100100°C
24MOS Overtemperature recovery temperature808080°C
Dimensional drawing of the JK-BD4A8S6P Smart BMS
Figure 3: Dimensional drawing of the BMS unit (dimensions in mm).

5. Installation and Setup

5.1. Wiring Diagram

Carefully follow the wiring diagram below to connect the BMS to your battery pack, charger, and load. Incorrect wiring can damage the BMS or battery.

Wiring diagram for JIKONG Active Balancing Protection Board
Figure 4: Wiring diagram for the JIKONG Active Balancing Protection Board. Connect the charger and controller to P- and B- terminals. Connect balance wires from B0 to Bn (B1, B2, B3... up to B8) to individual battery cells.

5.2. Connection Steps

  1. Connect B- to Battery Negative: Connect the main negative terminal of the BMS (B-) to the overall negative terminal of your battery pack.
  2. Connect P- to Load/Charger Negative: Connect the main negative terminal for the load and charger (P-) to the appropriate negative terminals of your load and charger.
  3. Connect Balance Wires: Connect the balance wires (B0, B1, B2... Bn) to the positive terminals of each individual cell, starting from B0 (which connects to the main battery negative, or the negative of the first cell) and proceeding sequentially to Bn (the positive of the last cell). Ensure the order is correct.
  4. Download APP: Scan the QR code on the BMS unit (or refer to the product packaging/seller information) to download the official mobile application.
Close-up of JK-BD4A8S6P Smart BMS showing QR code for APP download
Figure 5: The BMS unit features a QR code for easy access to the mobile application download.

6. Mobile Application Operation

The Jikong Smart BMS can be monitored and configured via a dedicated mobile application connected via Bluetooth.

6.1. Bluetooth Connection

  1. Ensure Bluetooth is enabled on your smartphone.
  2. Open the Jikong BMS APP.
  3. The APP should automatically detect and connect to the BMS. If not, initiate a scan within the APP.

6.2. APP Interface Overview

The APP provides real-time data and control options:

  • Status Tab: Displays overall battery voltage, individual cell voltages, battery capacity, cycle count, and cell wire resistance.
  • Settings Tab: Allows configuration of various protection parameters such as overcharge/discharge voltages, balancing thresholds, and temperature limits.
  • Control Tab: Provides options to enable/disable charging and discharging, and other control functions.
Screenshots of the Jikong BMS mobile application interface showing Status and Settings tabs
Figure 6: Screenshots of the mobile APP, showing real-time cell voltage monitoring, wire resistance, and configurable charge/discharge parameters for LiFePO4 and Li-ION batteries.

7. Active Balancing Function

The BMS features active balancing, which is crucial for maintaining the health and longevity of your battery pack. Active balancing works by transferring energy from higher voltage cells to lower voltage cells, ensuring all cells remain at a similar state of charge.

Diagram illustrating active balance energy transfer between battery cells
Figure 7: Active balancing mechanism, showing energy transfer from high voltage cells to compensate low voltage cells, thereby extending battery life.

8. Troubleshooting

If you encounter issues with your BMS, consider the following common problems and solutions:

  • No Power Output: Check all wiring connections, especially the main B- and P- terminals. Verify individual cell voltages are within acceptable range using the APP.
  • BMS Not Connecting to APP: Ensure Bluetooth is enabled on your device and the BMS is powered on. Try restarting the APP or your phone.
  • Balancing Not Occurring: Check the balancing initial voltage setting in the APP. Balancing only activates when cell voltage differences exceed this threshold.
  • Over-protection Triggered: The BMS may shut down due to overcharge, over-discharge, overcurrent, or overtemperature. Check the APP for fault codes or status indicators. Address the cause (e.g., reduce load, allow cooling, charge battery).
  • Inaccurate Readings: Ensure balance wires are securely connected and not damaged. High resistance in balance wires can lead to inaccurate cell voltage readings.

For complex issues, refer to the detailed block diagram of the BMS to understand the internal components and their interactions:

Block diagram of JIKONG Active Balancing Protection Board
Figure 8: Internal block diagram of the JIKONG Active Balancing Protection Board, illustrating the MCU, communication interfaces (RS485, Bluetooth), sensing modules (NTC, current acquisition), and protection circuits.

9. Maintenance

Proper maintenance ensures the longevity and reliable operation of your BMS and battery pack:

  • Regular Inspection: Periodically check all wiring for loose connections, corrosion, or damage.
  • Keep Clean and Dry: Ensure the BMS unit is kept clean and free from dust, moisture, and conductive debris.
  • Temperature Management: Operate the BMS within its specified temperature range (-30°C to 70°C). Avoid extreme heat or cold.
  • Firmware Updates: Check the manufacturer's website or APP for any available firmware updates to improve performance or address bugs.
  • Parameter Review: Occasionally review the BMS settings in the APP to ensure they are still appropriate for your battery and application.

10. User Tips

  • Initial Balance: For new battery packs, allow the BMS sufficient time to perform initial balancing. This can take several charge/discharge cycles.
  • Monitor Cell Voltages: Regularly check individual cell voltages via the APP to identify any potential issues early.
  • Proper Sizing: Ensure the BMS current rating (60A) is appropriate for your application's maximum continuous and peak current demands.
  • Ventilation: If the BMS is enclosed, ensure adequate ventilation to prevent overheating, especially during high current operation.

11. Warranty and Support

For warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt and product model number (JK-BD4A8S6P) handy for faster service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.