Introduction
Thank you for choosing the REWARD RD831509M Square Men's Quartz Watch. This manual provides detailed instructions for setting up, operating, and maintaining your new timepiece. Please read this manual thoroughly to ensure proper use and to enjoy all the features of your watch.
Safety Information
- Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes.
- Do not expose the watch to strong magnetic fields, as this may affect the accuracy of the quartz movement.
- Keep the watch away from harsh chemicals, solvents, and detergents, which can damage the case, band, or seals.
- Avoid strong impacts or drops.
- For water resistance, ensure the crown is pushed in completely before exposure to water.
Package Contents
- 1 x REWARD RD831509M Quartz Watch
- 1 x Paper Box
- 1 x Instruction Manual (this document)
Product Overview
The REWARD RD831509M features a square metallic alloy case, a silicone band, and a multi-function dial with chronograph capabilities and a calendar display.

Key components include:
- Main Crown: Used for adjusting time and date.
- Push Buttons: Used for operating the chronograph functions and calendar adjustment.
- Dial: Features 1/10 seconds dial, minute dial, seconds dial, and a calendar display.
- Luminous Hands: For easy reading in low light conditions.

Setup and Operation
1. Setting the Time
- Pull the main crown out to the second click position.
- Turn the crown to set the hour and minute hands. Ensure the AM/PM is correctly set if your watch has a 24-hour indicator or if setting the date.
- Push the crown back into the normal position.
2. Setting the Date (Calendar)
- Pull the main crown out to the first click position.
- Turn the crown to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this may interfere with the automatic date change mechanism.
- Push the crown back into the normal position.
3. Using the Chronograph (Stop Watch)
The chronograph function allows you to measure elapsed time.
- Start/Pause: Press the "Start/Pause Button" (typically the top pusher) to start the chronograph. Press it again to pause.
- Restart: To reset the chronograph to zero, ensure it is paused, then press the "Restart Button" (typically the bottom pusher).
- The sub-dials will display 1/10 seconds, minutes, and seconds of the elapsed time.
Features
Luminous Display
The watch hands are treated with a luminous material, allowing you to read the time in low-light conditions after exposure to light. The glow intensity and duration depend on the exposure to light.

Water Resistance (3 ATM / 30 Meters)
This watch is designed with a water resistance rating of 3 ATM (30 meters), making it suitable for everyday use. This means it can withstand splashes, rain, hand washing, and car washing. It is NOT suitable for swimming, diving, or prolonged submersion in water.

Important: Do not operate the crown or push buttons while the watch is wet or submerged in water.
Maintenance
Cleaning
- Wipe the watch case and band regularly with a soft, dry cloth to remove dust and dirt.
- For the silicone band, you can use a slightly damp cloth with mild soap and water, then rinse and dry thoroughly.
- Avoid using abrasive materials or harsh chemicals for cleaning.
Battery Replacement
The watch is powered by a quartz movement with a battery life of approximately 2 years. When the watch stops or the second hand starts skipping, it's an indication that the battery needs to be replaced. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is maintained.
Storage
When not wearing your watch, store it in a cool, dry place, away from direct sunlight and extreme temperatures. The original paper box can be used for storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch stops or runs intermittently. | Low battery. | Replace the battery (recommended by a professional). |
| Date changes at noon. | AM/PM setting is incorrect. | Advance the time by 12 hours. |
| Chronograph hands do not reset to zero. | Requires calibration. | Consult a watch technician for adjustment. |
| Condensation inside the watch. | Exposure to extreme temperature changes or compromised water seal. | Seek professional service immediately to prevent damage. |
Specifications

| Feature | Detail |
|---|---|
| Model Number | RD831509M |
| Movement | Quartz (Model PE902, Brand SUNON) |
| Movement Origin | China |
| Display Type | Analog, Numberless |
| Case Material | Alloy |
| Case Shape | Square |
| Case Size | 44 mm |
| Case Thickness | 13 mm |
| Dial Window Material Type | Hardlex (Curved) |
| Band Material Type | Silicone |
| Band Width | 24*20 mm |
| Band Length | 24 cm (240 mm) |
| Clasp Type | Buckle |
| Water Resistance Depth | 3 Bar (30 Meters) |
| Watch Weight | 95 g |
| Battery Included | Yes |
| Battery Life | 2 Years |
| Features | Stop Watch, Luminous, Complete Calendar, Water-Resistance, Luminous Hands |
User Tips
- To maximize the glow of the luminous hands, expose the watch to a bright light source for a few minutes before entering a dark environment.
- Regularly check that the crown is fully pushed in to maintain the watch's water resistance, especially after adjusting the time or date.
Warranty and Support
For any issues or questions regarding your REWARD watch, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase for warranty claims.