Introduction
This manual provides detailed instructions for the operation and maintenance of your Baofeng UV16M V2 Walkie Talkie. The UV16M V2 is an upgraded 15W high-capacity AM/FM 2-way radio featuring a full band LCD, frequency copy function, NOAA weather reception, and noise reduction. It is designed for reliable communication across various environments.

Figure 1: Baofeng UV16M V2 Walkie Talkie Overview
Package Contents
Please check the package carefully to ensure all items are present:
- 1 x Baofeng UV16M V2 Radio
- 1 x Antenna
- 1 x Battery
- 1 x Belt Clip
- 1 x Hand Strap
- 1 x Type-C Charger
- 1 x User's Manual (this document)

Figure 2: Standard Package Contents
Product Overview
Familiarize yourself with the main components and controls of your UV16M V2 radio:

Figure 3: Front View and Key Controls

Figure 4: Side and Rear Views
Setup
- Attach Antenna: Screw the antenna clockwise into the connector on the top of the radio until it is secure.
- Install Battery: Align the battery with the back of the radio and slide it into place until it clicks.
- Charge Battery:
- Connect the Type-C charger cable to the radio's Type-C port (located on the rear, as shown in Figure 4).
- Connect the other end of the cable to a compatible USB power source (e.g., wall charger, power bank, car charger, USB plug).
- The indicator light will show charging status.

Figure 5: Type-C Charging Options
- Power On: Rotate the Power and Volume switch (top right) clockwise to turn on the radio and adjust the volume.
Operating Instructions
Basic Operation
- Power On/Off & Volume: Use the top-right knob.
- PTT (Push-to-Talk) Button: Press and hold to transmit, release to receive.
- Frequency/Band Selection: Use the "Frequency/Band" button to switch between frequency display and channel display. Use the "BAND" key to switch between different frequency bands.
- Channel Mode to Frequency Mode: Press the "F" button followed by "3" to switch between Channel mode and Frequency mode.
- Numeric Keyboard: Used for manual frequency input and menu navigation.
- MENU Key: Access the radio's settings menu.
- EXIT Key: Exit current menu or function.
Advanced Features
Wireless Frequency Copy
The UV16M V2 supports one-touch search frequency, easy pairing, and copying channel configuration parameters from other radios.
- To activate the function, press and hold the "BAND" key.
- Press "#" to switch the band during the copy process.

Figure 6: Wireless Frequency Copy Feature
NOAA Weather Reception
The radio supports NOAA weather reception in the United States and Canada, providing alerts for various weather events.
- To activate NOAA Weather, press and hold the "0" key.

Figure 7: NOAA Weather Reception
Aviation Band Reception (AM: 108-136MHz)
The UV16M V2 can receive signals on the aviation band, allowing you to monitor air traffic communications.

Figure 8: Aviation Band Monitoring
Manual Frequency Input
The full keyboard allows for direct frequency input and menu operation, enabling you to save useful frequencies as channels without programming software.

Figure 9: Manual Frequency Input
VOX Function (Voice Operated Transmission)
The VOX function allows you to transmit simply by speaking into the microphone, eliminating the need to press the PTT button.

Figure 10: VOX Function in Use
Repeater Function
The radio supports repeater functionality, extending communication range by utilizing repeater stations.

Figure 11: Repeater Function
Voice Encryption (Scrambler)
The 10-group scrambler function provides voice encryption for secure communications.

Figure 12: Voice Encryption Settings
Tri-Power Output
The radio offers three power output levels: High (H), Middle (M), and Low (L), allowing you to optimize power consumption and range.

Figure 13: Tri-Power Output Settings
Other Features
- FM Radio: Enjoy broadcast FM radio.
- Built-in High Light Torch: For illumination in low-light conditions.
- Dual Band Standby: Monitor two frequencies simultaneously.
- DTMF and 1750 Tone: For advanced signaling.
- Frequency/DCS/CTCSS Scan: Scan for active frequencies or tones.
- Digital Signal CTCC/DCS: For selective calling.
- INC Noise Reduction: Improves audio clarity.
Maintenance
Waterproof (IP67)
The Baofeng UV16M V2 is IP67 waterproof, meaning it is protected from dust and can withstand immersion in water up to 1 meter for up to 30 minutes. All materials, including the battery, headphone jack, and antenna jack, are designed to be waterproof.

Figure 14: IP67 Waterproof Feature
Video 1: Waterproof Demonstration of Baofeng UV16M V2
Despite its waterproof rating, avoid unnecessary exposure to water and ensure all ports are properly sealed before immersion.
General Care
- Clean the radio with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the radio in a cool, dry place when not in use.
- Avoid dropping the radio or subjecting it to severe impacts.
- Ensure the antenna is securely attached but do not overtighten.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on. | Battery is low or not installed correctly. | Charge the battery or re-install it properly. |
| Cannot transmit or receive. | Incorrect frequency/channel, antenna not connected, or out of range. | Verify frequency/channel settings. Ensure antenna is connected. Move closer to the other radio or repeater. |
| Poor audio quality. | Low signal strength, interference, or volume too low/high. | Adjust volume. Check for obstructions. Try a different frequency if interference is suspected. |
| Buttons unresponsive after water exposure. | Water may be temporarily affecting button contacts. | Dry the radio thoroughly. If issues persist, contact support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | UV16M-V2 |
| Output Power (W) | 10w-25w (Max 15W True Distance) |
| Battery Capacity (mAh) | High Capacity |
| Waterproof / Water-Resistant | IP67 |
| Battery Included | Yes |
| Material | Plastic |
| Storage Channel | 999 |
| Frequency Range | 65-520Mhz (RX), 136-174MHz (TX/RX), 200-260MHz (TX/RX), 400-520MHz (TX/RX), AM: 108-136MHz (RX), Police: 350-390MHz (RX), FM: 65-108MHz (RX) |
| Walkie Talkie Type | Portable |
| Display | Yes (1.77" Color Large Screen) |
| Maximum Range | 10km-50km |
| Certification | CE, FCC |
| Frequency stability | ±1ppm |
| Working temperature | -20℃ to +60℃ |
| Antenna impedance | 50Ω |
| Modulation mode | FM: 11KOF3E(12.5KHz), 16K0F3E(25KHz) |
| Number of NOAA channels | 10 |
| Audio Power | ≥0.5W |
| Audio Distortion | ≤10% |
| Emission Current | ≤1.5A |
| Maximum Frequency Deviation | ≤5KHz(25KHz), ≤2.5KHz(12.5KHz) |
| Modulation Distortion | ≤5% |
| Stray Power | ≤7.5uW |
| Adjacent Channel Power | 70dB(25KHz), 60dB(12.5KHz) |
| Residual Modulation | 40dB |

Figure 15: Key Features Summary

Figure 16: UV-16M vs. UV-5R Comparison
User Tips
- Language Settings: If you prefer the manual in a different language, please check the manufacturer's website or contact customer support for available translations.
- Performance: Users have reported the radio to be "very good" in performance, indicating reliable operation.
- Antenna: The high-gain antenna (20cm/7.87") is flexible and designed for longer distance and improved waterproof capabilities.

Figure 17: High Gain Antenna
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Baofeng website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.
Typical Applications
The Baofeng UV16M V2 is suitable for a variety of uses, including:
- Hiking and outdoor activities
- Climbing and mountaineering
- Security guard operations
- Agricultural work
- Farm communication
- Port operations

Figure 18: Where the UV16M V2 Can Be Applied