CNCEST 7018 Motor

Contents

CNCEST 7018 Motor 16-inch Electric Chainsaw Instruction Manual

Model: 7018 Motor | Brand: CNCEST

1. Introduction

Thank you for choosing the CNCEST 7018 Motor 16-inch Electric Chainsaw. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new electric chainsaw. Please read this manual thoroughly before use and keep it for future reference.

This electric chainsaw is designed for cutting various types of wood, including large logs, with its powerful 2000W motor and 16-inch guide plate. It features an automatic oil spray system for chain lubrication and an ergonomic design for comfortable use.

CNCEST 7018 Motor 16-inch Electric Chainsaw

Figure 1: Overview of the CNCEST 7018 Motor 16-inch Electric Chainsaw

2. General Safety Information

Always prioritize safety when operating power tools. Failure to follow safety instructions can result in serious injury or property damage.

  • Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and sturdy footwear.
  • Ensure the work area is clear of bystanders, especially children and pets.
  • Inspect the chainsaw before each use for any damage, loose parts, or worn components.
  • Keep hands and feet away from the chain when the chainsaw is plugged in or operating.
  • Do not operate the chainsaw in wet conditions or in the presence of flammable liquids or gases.
  • Always maintain a firm grip on both handles of the chainsaw.
  • Avoid cutting materials other than wood. Do not use the chainsaw for cutting hard stones, as this can damage the chain and guide plate.
  • Unplug the chainsaw from the power source before performing any adjustments, maintenance, or when not in use.

3. Package Contents

Upon unpacking, please ensure all items are present and undamaged:

  • 1 x Electric Chainsaw (main unit)
  • All necessary accessories for installation (e.g., guide bar, chain, side cover, bolts, adjustment knob)

4. Specifications

FeatureSpecification
MaterialCopper, Plastic, Aluminum
ColorRed
Voltage220V
Rated Power2000W
Frequency50Hz
Motor Type35 High All Copper Wire Motor (Brushed)
Chain AdjustmentTool-free External Adjustment
Drive Shaft Type9 Teeth
Rotation Speed800 r/min
Saw Chain Speed650 m/min (2132 ft/min)
Guide Plate Length405 mm / 16 inches
Power Cord Length1.5 m / 4.92 ft
Weight5.3 kg / 11.68 lbs
Product Size22 x 80 cm / 8.7 x 31.5 inches
CertificationCE

5. Setup and Assembly

The chainsaw requires some assembly before first use. Follow these steps carefully:

5.1 Chain and Guide Bar Installation

  1. Place the chain onto the guide bar, ensuring the cutting teeth are facing outwards in the direction of rotation.
  2. Hook the chain onto the drive sprocket located on the chainsaw motor unit.
  3. Align the chain tensioner pin (adjustment screw) with the corresponding hole in the guide bar.
  4. Place the side cover over the guide bar and chain, ensuring the tensioner pin correctly engages with the guide bar.
  5. Insert the two main bolts and loosely tighten them. Do not fully tighten yet.
  6. Adjust the chain tension using the external adjustment knob. Turn the knob until the chain is snug against the guide bar but can still be moved freely by hand. The chain should not sag on the underside of the guide bar.
  7. Once the chain tension is correct, fully tighten the two main bolts to secure the side cover and guide bar.

Watch the following video for a visual guide on chain installation and tensioning:

Video: Demonstration of chain installation and tensioning.

5.2 Filling with Chain Oil

Before operating, fill the oil reservoir with appropriate chainsaw chain oil. The chainsaw features an automatic oil spray system for continuous lubrication during operation.

  • Locate the refueling port, typically covered by a cap.
  • Unscrew the cap and carefully pour chainsaw chain oil into the reservoir.
  • Monitor the oil level through the visible oil window to avoid overfilling or underfilling.
  • Securely replace the cap to prevent leaks.
Chainsaw chain tensioning mechanism and oil window

Figure 2: Close-up of the chain tensioning mechanism and visible oil window.

6. Operating Instructions

Once assembled and filled with oil, your chainsaw is ready for operation. Always ensure you are wearing appropriate safety gear.

6.1 Pre-Operation Checks

  • Verify the chain is properly installed and tensioned.
  • Check the oil level in the reservoir.
  • Ensure the power cord is in good condition and connected to a suitable 220V power outlet.
  • Confirm the guard stopper is in place to prevent wood chip scratches.
  • Hold the chainsaw firmly with both hands, utilizing the auxiliary handle to reduce hand fatigue.
Chainsaw with thoughtful design features

Figure 3: Thoughtful design features including Guard Stopper, Auxiliary Handle, and Adjustable Knob.

6.2 Starting and Cutting

  1. Plug the chainsaw into the power outlet.
  2. Hold the chainsaw securely with both hands.
  3. Engage the safety switch (if present) and press the trigger to start the motor.
  4. Allow the chain to reach full speed before making contact with the wood.
  5. Apply steady, even pressure when cutting. Do not force the chainsaw through the wood.
  6. Be aware of kickback and maintain a stable stance.
  7. Release the trigger to stop the chainsaw.

7. Maintenance

Regular maintenance ensures the longevity and safe operation of your chainsaw.

7.1 Cleaning

  • Always unplug the chainsaw before cleaning.
  • Remove sawdust, wood chips, and debris from the guide bar, chain, and motor housing using a brush or compressed air.
  • Clean the oil reservoir and visible oil window periodically.

7.2 Chain and Guide Bar Care

  • Regularly check chain tension and adjust as needed using the external adjustment knob.
  • Ensure the automatic oil spray system is functioning and the oil reservoir is adequately filled with dedicated chainsaw chain oil.
  • Inspect the chain for dullness or damage. Sharpen or replace the chain as necessary.
  • Check the guide bar for wear, especially on the rails. Rotate the guide bar periodically to ensure even wear.
Chainsaw chain and guide bar close-up

Figure 4: Close-up view of the 16-inch chain and guide bar.

8. Troubleshooting

If you encounter issues with your chainsaw, refer to the following common problems and solutions:

  • Chainsaw does not start: Check if the power cord is securely plugged in and the power outlet is functional. Ensure the safety switch is disengaged.
  • Chain is not moving or moves slowly: Verify the chain tension is correct. Inspect the chain and guide bar for any obstructions or damage. Ensure the side cover bolts are not overtightened to the point of binding the chain.
  • Excessive vibration or noise: Check for loose components, incorrect chain tension, or a damaged chain/guide bar.
  • Chain oil not dispensing: Check the oil reservoir level. Ensure the oil port is not clogged.

9. User Tips

  • The chainsaw uses a 16-inch chain, corresponding to the guide plate length.
  • Always use dedicated chainsaw chain oil for lubrication to ensure optimal performance and extend the life of your chain and guide bar.
  • Take advantage of the ergonomic handle design and auxiliary handle to reduce muscle fatigue during extended use.
  • The 4.92ft power cord provides ample reach, but always be mindful of its position to avoid accidental cutting.

10. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Chainsaw side view with power cord

Figure 5: Side view of the electric chainsaw, highlighting the power cord.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.