K&F CONCEPT K234A0+BH-28L

Contents

K&F CONCEPT K234A0+BH-28L Camera Tripod Instruction Manual

Model: K234A0+BH-28L

Multi-Angle Center Column Lightweight Travel Outdoor DSLR Tripod

1. Introduction

Thank you for choosing the K&F CONCEPT K234A0+BH-28L Camera Tripod. This professional-grade tripod is designed for versatility and portability, featuring a multi-angle center column, a 360-degree rotatable ball head, and a lightweight aluminum construction. It is suitable for a wide range of cameras, including DSLRs, mirrorless cameras, point-and-shoot cameras, video cameras, and smartphones. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your equipment.

K&F CONCEPT Tripod with 8kg load, 360° ball head, extension arm kits, and 195cm max height.
Figure 1: K&F CONCEPT Tripod highlighting key features.
Video 1: Product demonstration showcasing the tripod's adjustable center column, leg adjustments, and phone holder.

2. Safety Information

  • Always follow the instructions for use provided in this manual.
  • Adult supervision is required when children are using or near the tripod.
  • Ensure all locks and adjustments are securely tightened before mounting equipment or leaving the tripod unattended.
  • Do not exceed the maximum load capacity of 8 kg (17.6 lbs).
  • Avoid exposing the tripod to extreme temperatures or corrosive environments.
  • Keep the tripod clean and free from dust and debris to ensure smooth operation.

3. Package Contents

Please check the package to ensure all items are present:

  • 1 x K234A0 Tripod (with BH-28L Ball Head)
  • 1 x Removable Extension Boom Arm
  • 1 x Phone Clip
  • 1 x Carry Bag
  • 1 x User Manual (this document)
Contents of the K&F CONCEPT tripod package.
Figure 2: Package List.

4. Specifications

FeatureSpecification
Model NumberK234A0+BH-28L
TypeProfessional Tripod
MaterialAluminum
Max Extended Length1950mm (76.7 inches)
Folded Length390mm (15.4 inches)
Weight (with ball head & extension arm kits)1.65 kg (3.63 lbs)
Load Capacity8 kg (17.6 lbs)
Leg Sections4
Leg Tube Diameter2.3 cm (0.91 inches)
Ball Head Diameter2.8 cm (1.1 inches)
Ball Head Bottom Connection3/8"
CompatibilityVideo Camera, Point & Shoot Cameras, DSLRs, Smartphones, Mirrorless System Camera
Diagram showing tripod heights: folded 395mm, short 530mm, medium 1200mm, and extended 1630mm.
Figure 3: Tripod height configurations. Note: Maximum extended length is 1950mm, this image illustrates common extended heights up to 1630mm.

5. Setup

5.1 Unpacking and Initial Inspection

Carefully remove all components from the carry bag and packaging. Inspect for any signs of damage. Ensure all parts listed in Section 3 are present.

5.2 Attaching the Camera/Phone

  1. Ensure the quick release plate is securely attached to your camera or phone clip. The tripod features a standard 1/4 inch thread for compatibility.
  2. Align the quick release plate with the clamp on the ball head.
  3. Slide the plate into the clamp and tighten the locking knob until your device is firmly secured.
Tripod with a smartphone mounted using a quick release plate.
Figure 4: Attaching a smartphone using the quick release plate.

5.3 Adjusting Leg Angles and Height

  1. To adjust the leg angle, press the leg angle adjustment tab at the top of each leg and move the leg to the desired position. The tripod offers three adjustable angles for stability on various terrains.
  2. To extend or retract the legs, use the quick flip leg locks. Flip the lock open, extend or retract the leg section, and then flip the lock closed to secure.
Close-up of the tripod leg with a quick flip leg lock.
Figure 5: Efficient and flexible quick flip leg lock mechanism.
Tripod legs adjusted to three different angles.
Figure 6: Tripod legs adjustable in three angles for stability.

6. Operating Instructions

6.1 Using the Multi-Angle Center Column

The unique multi-angle center column can be moved from 0 to 180 degrees and rotated 360 degrees horizontally, allowing for versatile shooting angles, including horizontal, inverted, and low-angle shots.

  1. Loosen the center column locking knob.
  2. Adjust the center column to the desired angle or position.
  3. Tighten the locking knob securely to fix the column in place.
Tripod with camera mounted on the removable extension boom arm, demonstrating its multi-angle capability.
Figure 7: Removable extension boom arm in use for multi-angle shooting.
Tripod with the universal center column adjusted to an angle.
Figure 8: Universal center column adjusted for flexible shooting angles.

6.2 Operating the 360-Degree Ball Head

The 28mm metal ball head allows for smooth and precise camera positioning.

  1. Loosen the main locking knob on the ball head to adjust the camera angle.
  2. For panoramic shots, loosen the panning lock knob at the base of the ball head to rotate the camera 360 degrees horizontally. The integrated scale helps with precise alignment.
  3. Once the desired position is achieved, tighten all locking knobs securely.
Detailed view of the Ball Head BH-28L with specifications.
Figure 9: Ball Head BH-28L details.
Tripod set up for 360-degree panoramic shooting.
Figure 10: Achieving 360-degree panoramic shooting with the ball head.

6.3 Inverted Shooting

For extreme low-angle photography or macro shots, the center column can be inverted:

  1. Remove the ball head and center column from the tripod base.
  2. Reinsert the center column upside down into the tripod base.
  3. Reattach the ball head and your camera to the inverted center column.

6.4 Portability

The tripod folds down to a compact 39cm (15.4 inches) for easy transport.

Tripod folded down to 39cm, emphasizing its lightweight and portable design.
Figure 11: Tripod folded for portability.
A person carrying the folded tripod in a backpack.
Figure 12: Ultra-portable design, fitting into a backpack.

7. Maintenance

  • Cleaning: After each use, especially in dusty or sandy environments, wipe down the tripod legs and joints with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
  • Lubrication: Periodically check the leg locks and ball head for smooth operation. If necessary, apply a small amount of silicone-based lubricant to moving parts, avoiding excessive application.
  • Storage: Store the tripod in its carry bag in a dry, cool place away from direct sunlight and moisture.
  • Inspection: Regularly inspect all screws, knobs, and leg locks for tightness and wear. Tighten any loose components.

8. Troubleshooting

8.1 Tripod is unstable

  • Ensure all leg sections are fully extended and all quick flip locks are securely closed.
  • Verify that the leg angles are evenly spread and locked into position.
  • Check that the center column is fully lowered or securely locked if extended.
  • Ensure the ground surface is as level as possible.

8.2 Camera/Phone is not secure on the ball head

  • Make sure the quick release plate is correctly seated in the ball head clamp.
  • Tighten the quick release plate locking knob firmly.
  • Ensure the camera or phone clip is properly attached to the quick release plate.

8.3 Ball head movement is stiff or loose

  • If stiff, check for dirt or debris. Clean the ball head and apply a small amount of silicone lubricant if needed.
  • If too loose, tighten the main locking knob on the ball head.

9. User Tips

  • The ball head is included with the tripod, so you don't need to purchase it separately.
  • When using the extension boom arm, ensure the tripod legs are spread wide for maximum stability, especially with heavier cameras.
  • Always carry the tripod in its dedicated carry bag to protect it during travel.

10. Warranty & Support

K&F CONCEPT provides a 1-year warranty for this product. For warranty claims or technical support, please contact K&F CONCEPT Official Store directly or visit their official website.

Manufacturer: Shenzhen Zhuo Lr Photographic Equipment Co.

Manufacturer Address: Goming No venengong Park Nol Denghuan Road Yousong Community conghua sweet, Longhia Den Shenzhen China

Official Website: Please refer to the product packaging or official K&F CONCEPT channels for the most up-to-date contact and support information.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.