1. Introduction
Thank you for choosing the OUPES Exodus 600 Plus Portable Power Station. This device is a versatile and reliable power solution designed for home use, camping, and various outdoor activities. With its 512Wh capacity and 600W output, it can power multiple devices simultaneously. This manual provides essential information for safe operation, optimal performance, and proper maintenance of your power station.
2. Safety Instructions
- Do not disassemble, repair, or modify the unit.
- Keep the unit away from fire or extreme temperatures.
- Do not expose the unit to liquids.
- Use only recommended accessories and charging cables.
- Ensure proper ventilation during use and charging.
- Keep out of reach of children.
3. Package Contents
Please check that all the following items are included in your package:
- 1 x OUPES Exodus 600 Plus Portable Power Station
- 1 x AC Charging Cable
- 1 x User Manual (this document)
- 1 x Warranty Card
- 1 x Fuse 10A

4. Product Overview
The OUPES Exodus 600 Plus features a compact design with multiple output ports and an intuitive LCD display for monitoring status.

4.1. Ports and Controls
- AC Outlets: Two Pure Sine Wave AC outlets (110V/600W, 1200W Peak) for household appliances.
- USB-A Ports: Two USB-A ports (18W max) for charging smartphones, tablets, and other USB-powered devices.
- USB-C Port: One PD TYPE-C port for fast charging compatible devices.
- DC Port: One 12V DC port (120W) for automotive accessories or other DC-powered devices.
- Power Button: Central button to turn the unit on/off.
- LCD Display: Shows battery level, input/output power, and error indicators.

4.2. LCD Display Indicators
The LCD display provides real-time information about the power station's status, including:
- Battery charge level indicator.
- Input power (charging wattage).
- Output power (discharge wattage).
- Error icons (e.g., short-circuit, over-current, over-voltage, low-voltage, over-load, over-heating).
5. Setup
5.1. Initial Charging
Before first use, fully charge your OUPES Exodus 600 Plus. Connect the provided AC charging cable to the power station's input port and then to a wall outlet. The LCD display will show the charging status. It is recommended to fully charge the unit before storing it for extended periods.
6. Operating Instructions
6.1. Turning On/Off
Press and hold the central POWER button for a few seconds to turn the power station on or off. The LCD display will illuminate when the unit is on.
6.2. Using AC/DC/USB Outputs
Once the unit is on, you can activate specific output sections:
- AC Output: Press the 'AC' button next to the AC outlets to enable AC power. Connect your devices to the AC outlets.
- DC Output: Press the 'DC' button next to the 12V DC port to enable DC power. Connect your 12V devices.
- USB Output: The USB-A and USB-C ports are typically active when the unit is on. Connect your USB devices directly.
Ensure that the total power consumption of your connected devices does not exceed the maximum output of each port or the overall unit capacity.
6.3. Charging the Power Station
The Exodus 600 Plus supports multiple charging methods:
- AC Wall Outlet: Use the included AC charging cable. Recharges 0-80% in approximately 2 hours (with 300W AC input).
- Solar Panel (PV): Connect a compatible OUPES 240W solar panel (sold separately) to the input port. Recharges 0-80% in approximately 2 hours (with 240W PV input).
- AC Wall Outlet + Solar Panel: Combine AC and solar charging for ultra-fast recharging. Recharges 0-80% in approximately 59 minutes (with 540W AC+PV input), and 0-100% in 1.5 hours.

7. Maintenance
- Storage: Store the power station in a cool, dry place, away from direct sunlight and moisture.
- Battery Care: If the power generator is not in use, recharge it every 3 months to maintain battery health and prolong its lifespan.
- Cleaning: Use a dry, soft cloth to clean the exterior of the unit. Do not use harsh chemicals or abrasives.
8. Troubleshooting
The OUPES Exodus 600 Plus features a built-in Battery Management System (BMS) and MPPT controller for multi-protection. If an issue occurs, an icon may flash on the LCD screen.
| Problem Indicator (LCD Icon) | Possible Cause | Solution |
|---|---|---|
| Short-circuit icon | External device short-circuit or internal fault. | Disconnect all devices. Turn off and restart the power station. If the issue persists, contact support. |
| Over-current icon | Connected device draws too much current. | Disconnect high-power devices. Ensure total load is within specifications. |
| Over-voltage icon | Input voltage is too high during charging. | Check charging source voltage. Use only compatible chargers/solar panels. |
| Low-voltage icon | Battery voltage is too low. | Recharge the power station immediately. |
| Over-load icon | Total power draw exceeds the unit's capacity. | Reduce the number or power consumption of connected devices. |
| Over-heating icon | Internal temperature is too high. | Move the unit to a cooler, well-ventilated area. Allow it to cool down before resuming use. |
If you encounter persistent issues not resolved by the above steps, please contact OUPES customer service.
9. Specifications
| Feature | Specification |
|---|---|
| Model | Exodus 600 Plus |
| Capacity | 512Wh |
| AC Output | 2 x 110V/600W (1200W Peak) Pure Sine Wave |
| USB-A Output | 2 x 18W Max |
| USB-C Output | 1 x PD TYPE-C (18W Max) |
| DC Output | 1 x 12V/10A (120W) |
| Charging Input (AC) | 300W Max |
| Charging Input (Solar) | 240W Max |
| Combined Charging (AC+PV) | 540W Max |
| Recharge Time (AC 300W) | 0-80% in approx. 2 hours |
| Recharge Time (PV 240W) | 0-80% in approx. 2 hours |
| Recharge Time (AC+PV 540W) | 0-80% in approx. 59 minutes; 0-100% in 1.5 hours |
| Cycle Life | 3500+ cycles |
| Weight | 12.35 lbs (approx. 5.6 kg) |
| Protection Systems | MPPT, BMS (Short-circuit, Over-current, Over-voltage, Low-voltage, Over-load, Over-heating) |


10. User Tips
- For optimal battery longevity, avoid completely draining the power station frequently.
- When using solar charging, position the solar panels directly towards the sun for maximum efficiency.
- Always check the power requirements of your devices before connecting them to ensure they are within the power station's limits.
11. Warranty and Support
OUPES offers a 36-month product warranty for the Exodus 600 Plus Portable Power Station. For any technical assistance, troubleshooting, or warranty claims, please contact OUPES customer service. Keep your purchase receipt and warranty card for reference.