JIKONG JK-B1A20S15P

Contents

JIKONG JK-B1A20S15P Smart Active Balance BMS User Manual

Model: JK-B1A20S15P

For 8S-24S Li-Ion, LiFePo4, LTO Batteries

1. Introduction

The JIKONG JK-B1A20S15P is an intelligent active balance Battery Management System (BMS) designed to protect and optimize the performance of your lithium battery packs. It supports a wide range of battery configurations from 8S to 24S, including Li-Ion, LiFePo4, and LTO chemistries. This BMS features smart active balancing, comprehensive protection functions, and versatile communication interfaces, ensuring the safety and longevity of your battery system.

JIKONG BMS JK-B1A20S15P product overview
Figure 1: JIKONG BMS JK-B1A20S15P with key features highlighted. Functions include Bluetooth/Display, Battery BMS type, 1A balancing current, 8S-20S battery strings, and 150A charge/discharge current.
JIKONG Intelligent Active Balanced Power Management System features
Figure 2: Overview of JIKONG Intelligent Active Balanced Power Management System (BMS) capabilities. Supports 8S-24S Li-ion, LiFePo4, LTO batteries, with app support for iOS, Android, and HarmonyOS. Features include five major interfaces, multi-interface display, high-performance MCU, full aluminum alloy shell, 100A-200A continuous current, and 200A-350A instantaneous current.

2. Packing List

Please check the contents of your package against the following list:

JIKONG BMS Packing List
Figure 3: Contents of the JIKONG BMS package.
  1. BMS Unit x 1
  2. Switch x 1 (long 50cm)
  3. NTC Temperature Sensor x 1 (long 40cm)
  4. Sampling Line B x 1 (long 70cm)
  5. Sampling Line A x 1 (long 70cm)

3. Specifications

The JIKONG JK-B1A20S15P BMS offers robust performance and features. Refer to the table below for detailed specifications. Note: Data tolerance range is ±2mm for dimensions.

JIKONG Product Specifications Table
Figure 4: Detailed product specifications for various JIKONG BMS models, including the JK-B1A20S15P.
JIKONG JK-B1A20S15P Key Specifications
AttributeValue
Brand NameJIKONG
ModelJK-B1A20S15P
TypeLIFEPO4 Battery BMS
Handware or SmartSMART BMS
Balance FunctionActive Balanced BMS
Balancing Current1A
Number of Battery Strings8S-24S
Charge and Discharge PortCommon Port BMS
Continuous Charge Current150A
Continuous Discharge Current150A
Maximum Discharge Current (MAX 2min)300A
FunctionOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
Bluetooth FunctionSupport for Android/iOS phone
CertificationCE, FCC
Dimensions (L x W x H)162mm x 102mm x 16.6mm
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS
JIKONG BMS Product Dimensions
Figure 5: Product dimensions of the JIKONG BMS. Length: 162mm, Width: 102mm, Thickness: 16.6mm. Mounting hole width: 95mm, distance between mounting holes: 68.5mm.

4. Setup and Installation

Proper installation and wiring are crucial for the safe and efficient operation of your BMS. Please follow these steps carefully.

4.1. BMS Interfaces

The BMS is equipped with various interfaces to support different functionalities and communication modes.

JIKONG BMS Interfaces
Figure 6: Rich interface options on the JIKONG BMS, including CAN/RS485, NTC, GPS, Sampling ports (A and B), and Display/Switch ports.
  • CAN/RS485: For communication with inverters and other devices.
  • NTC: For connecting the NTC temperature sensor.
  • GPS: For GPS module connection (if applicable).
  • Sampling Port A/B: For connecting the battery cell voltage sampling lines.
  • Display/Switch: For connecting external display units or control switches.
  • Hot: For heating function (if supported by your battery pack).

4.2. Wiring Instructions

Follow these general steps for wiring the BMS to your battery pack:

  1. Connecting all the cables: Ensure all necessary cables (sampling lines, main power cables, switch, NTC) are prepared.
  2. Insert the cable into the BMS: Carefully connect the sampling lines, NTC, and switch cables to their respective ports on the BMS.
  3. Connect the B-line and the P-line to the battery: Connect the main negative (B-) and positive (P-) lines from the BMS to your battery pack.

Refer to the following diagrams for specific wiring configurations for 16-string and 24-string cells.

Wiring Diagram for 16-string cells
Figure 7: Wiring diagram for a 16-string battery cell configuration. Shows connections for individual cells, NTC sensors, B- (total negative electrode), P- (total positive electrode), and external loads/chargers.
Wiring Diagram for 24-string cells
Figure 8: Wiring diagram for a 24-string battery cell configuration. Similar to the 16-string diagram but adapted for more cells.

Important Safety Note: Incorrect wiring can cause damage to the BMS, battery, and connected equipment, and poses a fire hazard. If you are unsure, seek professional assistance.

5. Operating Instructions

The JIKONG BMS offers intelligent interaction and easy operation through various interfaces.

5.1. Active Balancing

The BMS features intelligent active balancing technology to ensure cell voltage consistency, which extends battery lifespan and improves performance.

Excellent Balance Effect
Figure 9: Comparison of cell voltage pressure difference before and after active balancing, demonstrating improved cell consistency.
Intelligent Active Balancing Technology
Figure 10: Description of intelligent active balancing technology, highlighting its benefits for battery lifespan and stability.

5.2. Monitoring and Control

You can monitor and adjust BMS parameters using a mobile APP, PC software, or an optional JIKONG home storage display.

Intelligent Interaction and Easy Operation
Figure 11: Shows mobile APP, PC software, and JIKONG home storage display options for intelligent interaction and easy operation.

5.2.1. Mobile APP (JIKONG SMART BMS)

The mobile APP supports iOS, Android, and HarmonyOS. It allows you to view real-time data such as voltage, current, temperature, SOC (State of Charge), alarms, and cycle counts. You can also adjust various protection values like overcharge, over-discharge, overcurrent, temperature, and balance settings.

JIKONG SMART BMS Mobile App Interface
Figure 12: Mobile phone Bluetooth APP "JIKONG SMART BMS" interface, displaying various battery parameters and status.

5.2.2. PC Software

The PC software provides a comprehensive interface for monitoring and configuring the BMS, including setting inverter communication protocols.

JIKONG BMS PC Software Interface
Figure 13: PC software interface for setting inverter communication protocols and monitoring BMS data.

5.3. Inverter Communication

The JIKONG BMS is compatible with mainstream inverter communication protocols, allowing seamless integration into various energy systems.

Compatible Inverter Protocols
Figure 14: List of compatible mainstream inverter communication protocols, including Deye, PYLONTECH, Growatt, Victron Energy, INVT, Goodwe, SMA, and SRNE.

6. Maintenance

To ensure the longevity and optimal performance of your JIKONG BMS, consider the following maintenance guidelines:

  • Physical Inspection: Regularly inspect the BMS and its connections for any signs of damage, loose wires, or corrosion.
  • Environmental Protection: The BMS features a fully enclosed aluminum alloy shell, providing dustproof, waterproof, anti-voltage, and anti-vibration protection. However, avoid exposing it to extreme conditions beyond its rated specifications.
Dustproof and Waterproof BMS
Figure 15: Illustration of the BMS's dustproof and waterproof capabilities, highlighting its robust aluminum alloy casing.
  • Firmware Updates: Check the JIKONG official website or app for any available firmware updates to ensure your BMS has the latest features and bug fixes.
  • Cleaning: Keep the BMS clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
  • Heat Dissipation: Ensure adequate airflow around the BMS, especially if it's operating under high current loads, to facilitate proper heat dissipation from its aluminum alloy shell.
BMS Heat Dissipation
Figure 16: Exploded view showing the fully aluminum alloy shell and its superior heat dissipation effect, crucial for maintaining performance.

7. Troubleshooting

If you encounter issues with your JIKONG BMS, consider the following general troubleshooting steps:

  • No Power/No Display:
    1. Check all power connections to ensure they are secure and correctly wired.
    2. Verify the battery voltage is within the operating range of the BMS.
    3. Ensure the external display (if used) is properly connected and powered.
  • Balancing Issues:
    1. Confirm all cell voltage sampling lines are correctly connected and making good contact.
    2. Check the cell voltages using the app or display to identify any significantly unbalanced cells.
    3. Ensure the active balancing function is enabled in the BMS settings.
  • Over-protection Triggered:
    1. Overcharge/Over-discharge: Check individual cell voltages. Ensure charger/load is appropriate for the battery.
    2. Overcurrent: Reduce the load or check for short circuits in the system.
    3. Overtemperature: Ensure the NTC sensor is correctly installed and the BMS has adequate ventilation.
  • Communication Problems (Bluetooth/RS485/CAN):
    1. Ensure the communication module (e.g., Bluetooth) is enabled and discoverable.
    2. Check cable connections for RS485/CAN.
    3. Verify that the correct communication protocol is selected in the app/PC software.
  • Unusual Behavior:
    1. Perform a soft reset of the BMS if possible (refer to app/PC software for this option).
    2. Review all wiring against the diagrams provided in Section 4.2.

If the problem persists after attempting these steps, please contact JIKONG customer support for further assistance.

8. User Tips

  • Initial Setup: Always connect the balance wires to the battery cells first, starting from B- (negative) and moving upwards, before connecting the main power cables to the BMS. Disconnect in reverse order.
  • Parameter Adjustment: When adjusting protection parameters via the app or PC software, make small, incremental changes and observe the system's behavior. Always understand the implications of each setting before modifying it.
  • Monitoring: Regularly check the battery status through the JIKONG SMART BMS app or PC software to catch potential issues early and ensure optimal battery health.
  • Firmware: Keep your BMS firmware updated to benefit from performance improvements and new features.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the JIKONG Official Store or your authorized dealer. Ensure you have your product model number (JK-B1A20S15P) and purchase details available when seeking support.

© 2024 JIKONG Official Store. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.