JIKONG JK-BD6A24S12P

Contents

JIKONG JK-BD6A24S12P Smart Active Balance BMS

Instruction Manual

Model: JK-BD6A24S12P | Brand: JIKONG

1. Introduction

The JIKONG JK-BD6A24S12P is an intelligent active balanced Battery Management System (BMS) designed for advanced battery pack management. It supports 8S to 24S series configurations for Li-ion, LiFePo4, and LTO battery types, ensuring optimal performance and longevity.

This BMS features robust protection mechanisms including overcharge, over-discharge, overcurrent, and short circuit protection. Its fully enclosed aluminum alloy shell provides excellent dustproof, waterproof, anti-voltage, and anti-vibration properties, making it suitable for various demanding applications.

Key functionalities include Bluetooth (BT) connectivity for mobile app control, display output, RS485/CAN communication, NTC temperature sensing, soft switch control, SOC indication, key switch, and an active equalizer for precise cell balancing.

JIKONG JK-BD6A24S12P BMS Product Overview
Figure 1: JIKONG JK-BD6A24S12P BMS with key features highlighted.
JIKONG BMS Exploded View showing internal components
Figure 2: Exploded view illustrating the high-quality internal components and cooling aluminum alloy shell.

2. Setup

2.1 Packing List

Before installation, please verify that all components are present in the package:

JIKONG BMS Packing List
Figure 3: Contents of the JIKONG BMS package.
  1. BMS Unit x 1
  2. Switch x 1 (long 50cm)
  3. NTC Temperature Sensor x 1 (long 40cm)
  4. Sampling Line B x 1 (long 70cm)
  5. Sampling Line A x 1 (long 70cm)

2.2 Installation and Wiring

Follow these steps carefully to install and wire your JIKONG BMS:

  1. Connect all balance cables: Ensure each balance wire is connected to the correct cell terminal, starting from B1 (positive of the first cell) up to the highest cell in your series (e.g., B16 or B24). The B- wire connects to the total negative terminal of the battery pack.
  2. Insert the cable into the BMS: Carefully plug the balance cable harness into the designated port on the BMS.
  3. Connect the B-line and the P-line to the battery: The main B- (total negative electrode) and P- (total positive electrode) wires should be connected to the battery pack. The P- line is the main discharge output and charge input.

Refer to the following diagrams for detailed wiring configurations for 16-string and 24-string cell setups. Ensure all connections are secure and correctly polarized to prevent damage to the BMS or battery pack.

Wiring Diagram for 16-String Cells
Figure 4: Wiring method for a 16-string cell battery pack, including connections for motor load, inverter, and charger.
Wiring Diagram for 24-String Cells
Figure 5: Wiring method for a 24-string cell battery pack, showing connections for motor load, inverter, and charger.

The BMS unit features various ports for communication and sensors:

JIKONG BMS Interface Ports
Figure 6: Detailed view of the BMS interfaces, including CAN/RS485, NTC, Sampling ports, GPS, Display/Switch, and Hot.
  • CAN/RS485: Communication interfaces for external devices.
  • NTC: Port for connecting the NTC temperature sensor.
  • Sampling Port B & A: Ports for connecting battery cell sampling lines.
  • GPS: (If applicable) GPS module connection.
  • Display/Switch: For connecting an external display or switch.
  • Hot: (If applicable) Heating element control.

3. Operating Instructions

3.1 Interfaces and Functions

The JIKONG BMS offers a rich set of interfaces to meet various daily needs, allowing RS485/CAN communication modes to be realized simultaneously.

  • CAN: Controller Area Network communication.
  • RS485: Serial communication standard.
  • BT (Bluetooth): Wireless communication for mobile app.
  • NTC: Negative Temperature Coefficient thermistor input for temperature monitoring.
  • Soft Switch: For power control.
  • SOC Indicator: State of Charge indicator.
  • Key Switch: External key switch input.
  • Active Equalizer: Internal active balancing function.

3.2 Mobile App and PC Software

The JIKONG BMS can be easily monitored and configured via the dedicated mobile app, "JIKONG SMART BMS," available for iOS, Android, and HarmonyOS. PC software is also available for more detailed control and monitoring.

JIKONG BMS Mobile App, PC Software, and Home Display
Figure 7: Options for intelligent interaction: Mobile App, PC software, and JIKONG home storage display.

The mobile app provides a multi-screen display for real-time data connection, offering a clear overview of your battery's status at a glance. You can view information such as:

  • Voltage (Total and individual cell voltages)
  • Current (Charge/Discharge)
  • Temperature (NTC sensor readings)
  • SOC (State of Charge)
  • Alarm status
  • Cycle count
  • Cell wire resistance
JIKONG BMS Mobile App Data Display
Figure 8: Screenshot of the JIKONG SMART BMS mobile app displaying various battery parameters.

3.3 Parameter Adjustment

The BMS allows for intelligent interaction and easy operation. You can freely adjust multiple protection values such as overcharge, over-discharge, overcurrent, temperature, and balance settings. It is crucial to read the internal parameters of the protection board first before making any changes to ensure safe and effective operation.

3.4 Inverter Communication Protocol

The JIKONG BMS supports protocol docking with mainstream inverter communication protocols in the market, ensuring fast and convenient integration with your power system.

JIKONG BMS Inverter Communication Protocols
Figure 9: Supported CAN protocols for inverter communication, configurable via the mobile app or host computer.

Supported CAN Protocols include:

Protocol Name Compatible Brands
Low-voltage hybrid inverter CAN communication protocol JIKONG, NIU, China Tower
PYLON CANBUS Protocol V1.2 PYLONTECH
Growatt xxSxxP ESS Protocol V2.01 Growatt
CAB-BUS_BMS_Protocol_201707
INVT BMS CAN Bus protocol V1.02 INVT
GoodWe LV BMS Protocol (CAN) V1.7(For ES/EMG-BP Series) GoodWe
FSS-ConnectingBat-TI-en-10 | Version 1.0
PACE BMS Modbus Protocol for RS485
MUST PV1800F-CAN communication protocol
JIKONG BMS PC Software Interface
Figure 10: PC software interface for setting inverter communication protocols and monitoring.

4. Maintenance

Proper maintenance ensures the longevity and reliable operation of your JIKONG BMS:

  • Cleaning: While the BMS is dustproof and waterproof, it is good practice to keep the exterior clean and free from excessive dust or debris. Use a soft, dry cloth for cleaning.
  • Connection Checks: Periodically inspect all wiring connections (balance wires, main power cables, communication cables) to ensure they are secure and free from corrosion or damage. Loose connections can lead to poor performance or system failure.
  • Environmental Conditions: Operate the BMS within its specified temperature and humidity ranges. Avoid exposing it to extreme heat, cold, or moisture beyond its design limits.
  • Software Updates: Regularly check for and install any available firmware updates for the BMS and updates for the mobile app or PC software. Updates often include performance improvements, bug fixes, and new features.

5. Troubleshooting

If you encounter issues with your JIKONG BMS, consider the following troubleshooting steps:

  • No Power/No Display:
    • Check all main power connections (B- and P-).
    • Ensure the balance wires are correctly connected and in the right sequence.
    • Verify the battery pack voltage is within the operational range of the BMS.
  • App Connectivity Issues:
    • Ensure Bluetooth is enabled on your mobile device.
    • Confirm the BMS is powered on.
    • Try restarting the app and the BMS.
    • Check if the app requires an update.
  • Protection Triggered (Overcharge, Over-discharge, Overcurrent, Temperature):
    • Consult the mobile app or PC software for specific alarm messages and parameter readings.
    • Overcharge/Over-discharge: Check individual cell voltages. Ensure charger settings are correct.
    • Overcurrent: Reduce load. Check for short circuits in the system.
    • Temperature: Ensure the NTC sensor is correctly installed and functioning. Provide adequate ventilation for the battery pack and BMS.
  • Balancing Issues:
    • Verify all balance wires are securely connected to the correct cell terminals.
    • Check the balance current setting in the app.
    • Allow sufficient time for active balancing to occur, especially with large cell voltage differences.

For persistent issues, refer to the detailed specifications and wiring diagrams, or contact JIKONG customer support.

6. Specifications

The following table outlines the key technical specifications for the JIKONG JK-BD6A24S12P BMS:

JIKONG Product Specifications Table
Figure 11: Detailed JIKONG Product Specifications, including various models.
Technical Index Specification (JK-BD6A24S12P)
Number of Battery Strings (Li-Ion/LiFePo4/LTO) 8S-24S
Balance Current 0.6A
Conductive Resistance in Main Circuit 1mΩ
Continuous Discharge Current 120A
Continuous Charge Current 120A
Maximum Discharge Current (MAX 20ms) 250A
Over Charge Protection Current 10-120A
Other Interfaces (Customized) RS485, CANBUS, HEAT
Size (mm) 162*102*20mm
Wiring Output Common Port
Single Cell Voltage Range 1-5V
Voltage Detection Accuracy ±5mV
Overcharge Protection Voltage 1.2-4.35V Adjustable
Over Charge Release Voltage 1.2-4.35V Adjustable
Over Current Detect Delay 2-120S Adjustable
Over Discharge Protection Voltage 1.2-4.35V Adjustable
Over Discharge Release Voltage 1.2-4.35V Adjustable
Quantity of Temperature Detection 3Pcs
Temp Protection Yes
Short Circuit Protection Yes
Coulomb Counter Yes
Bluetooth Function Support for Android/iOS phone
JIKONG BMS Product Dimensions
Figure 12: Product dimensions (Note: Data tolerance range is ±2mm).

7. User Tips

To maximize the performance and lifespan of your battery system with the JIKONG BMS, consider these user tips:

  • Balance Wire Connection Order: Always connect the balance wires to the battery cells in the correct sequence, typically from the lowest cell voltage (B1+) upwards. Incorrect connection order can damage the BMS.
  • Pre-Power Verification: Double-check all wiring connections, especially the main B- and P- cables and all balance wires, before applying power to the BMS or battery pack.
  • Regular Monitoring: Utilize the JIKONG SMART BMS mobile app for regular monitoring of individual cell voltages, temperatures, and overall battery health. This helps in early detection of potential issues.
  • Optimal Ventilation: Ensure the BMS and battery pack are installed in a location with adequate ventilation to facilitate heat dissipation, especially during high charge/discharge cycles.
  • Parameter Backup: Before making significant changes to the BMS parameters via the app or PC software, it is advisable to record or back up your current settings.

8. Warranty and Support

The JIKONG JK-BD6A24S12P BMS is manufactured by Chengdu Jikong Technology Co., Ltd., a high-tech enterprise known for its active balance power battery management systems.

For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the official seller, JIKONG Official Store, through your purchase platform. Provide your product model and purchase details for efficient support.

Chengdu Jikong Technology Co., Ltd. Company Information
Figure 13: Information about Chengdu Jikong Technology Co., Ltd., the manufacturer.

9. Accessories

JIKONG offers various accessories to enhance the functionality and monitoring of your BMS system:

JIKONG BMS Accessories
Figure 14: Available JIKONG BMS accessories, including various display units, switch key, RS485 module, and interface board.
  • 2.5 Inch Display
  • 4.3 Inch Touch Display
  • 3.2 Inch Display
  • Switch Key
  • RS485 Module
  • Interface Board

These accessories can be purchased separately to customize your battery management setup according to your specific needs.

© 2023 JIKONG Official Store. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.