1. Introduction
The JIKONG Lithium Battery Intelligent Protection Board (BMS) is a management system designed for large-capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high-current active balancing, overcharge and over-temperature protection, coulomb metering, Bluetooth communication, and GPS remote capabilities. This BMS is compatible with various battery chemistries, including lithium iron phosphate (LiFePo4), ternary lithium, and lithium titanate (LTO) battery types.
The protection board utilizes energy transfer active balancing technology with proprietary intellectual property rights, enabling a continuous balance current of up to 0.6A. This high-current active equalization technology ensures battery consistency, extends battery range, and prolongs battery life by delaying aging. The compact size, ease of operation, and comprehensive functionality make it suitable for a wide range of applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.
A mobile application (APP) is available for both Android and iOS operating systems, allowing users to connect via Bluetooth to monitor battery status, modify protection parameters, and control charge/discharge switches.
2. Functional Characteristics
The JIKONG BMS offers a comprehensive set of features to ensure optimal battery performance and safety:
- LED Bluetooth Status Indicator: Provides visual feedback on Bluetooth connection status.
- APP Remote Operation: Allows control and monitoring via a mobile application.
- Battery Capacity Calculation: Accurately estimates remaining battery capacity.
- High Precision Voltage Acquisition (±3mV): Ensures accurate cell voltage readings.
- High Precision Current Acquisition: Monitors current flow with high accuracy.
- Information Screen Display Support: Compatible with external display screens for real-time data viewing.
- Accurate Time Logging: Records operational data with precise timestamps.
- RS485/CAN Support (one of two): Offers flexible communication options.
- Heating Function Support: Enables battery heating in low-temperature environments.
- GPS Communication Support: Allows for battery location tracking.
- Discharge Precharge Function: Manages initial discharge to prevent current surges.
- Charge Overcurrent Protection: Prevents damage from excessive charging current.
- Charge Overvoltage Protection: Protects against overcharging individual cells.
- Charge Over Temperature Protection: Safeguards the battery during high-temperature charging.
- Low Temperature Protection During Charge: Prevents charging in dangerously cold conditions.
- Discharge Overcurrent Protection: Protects against excessive discharge current.
- Discharge Undervoltage Protection: Prevents over-discharging individual cells.
- Discharge Over Temperature Protection: Safeguards the battery during high-temperature discharging.
- Short Circuit Protection: Automatically disconnects in case of a short circuit.
3. Package Contents
The standard package for the JIKONG BMS includes the following components:
- 1 x BMS unit
- 1 x Switch (long 50cm)
- 1 x NTC (long 40cm)
- 1 x Sampling line B (long 70cm)
- 1 x Sampling line A (long 70cm)

4. Specifications
The JIKONG BMS JK-BD6A24S10P is available in various configurations. Below are the general and model-specific parameters.
4.1. General Parameters (150A/200A Protection Board)
| Technical Index | Description | Unit |
|---|---|---|
| Supply Voltage | 20-100 | V |
| Operating Power Consumption | <800 | mW |
| Operating Temperature | -30-70 | °C |
| Max. Number of Collection Strings | 24 | Strings |
| Max. Balancing Current | 0.6 | A |
| Max. Internal Loop Resistance | 0.65 (150A) / 0.5 (200A) | mΩ |
| Protection Board Size (L*W*H) | 162*102*20.4 | mm |
| Finished Weight | 420 | g |
4.2. Model-Specific Parameters
| Model | Continuous Charge Current | Continuous Discharge Current | Max. Instantaneous Current |
|---|---|---|---|
| JK-BD6AxxS-15P | 150A | 150A | 300A |
| JK-BD6AxxS-20P | 200A | 200A | 350A |


5. Setup and Installation
5.1. Unpacking and Precautions
Upon receiving your JIKONG BMS, please observe the following:
- Handle the packing box and protection board gently. Do not turn it upside down.
- Before unpacking, inspect the package for any signs of impact, damage, or other irregularities.
- Ensure all components listed in the package contents are present and undamaged.
5.2. Wiring Instructions
The JIKONG BMS JK-BD6AxxS-15P/20P series is compatible with 7-24 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure correct connections to prevent damage or malfunction.
General Wiring Steps:
- Connect all necessary cables to the BMS.
- Insert the cables securely into the BMS ports.
- Connect the B-line (battery negative) and P-line (load/charger negative) to the battery.


5.3. Interface Definitions
The BMS features various connectors for different functions. Proper identification and connection are crucial for correct operation.
| Pin Number | Name | Definition |
|---|---|---|
| 1 | B- | Total negative battery |
| 2 | B1 | The first battery positive |
| ... | ... | ... |
| 15 | B14 | The fourteenth battery positive |
| Pin Number | Name | Definition |
|---|---|---|
| 1 | B15 | The fifteenth battery positive |
| ... | ... | ... |
| 10 | B24 | The twenty-fourth battery positive (Total battery positive) |
| Pin Number | Name | Definition |
|---|---|---|
| 1 | T1A | 1st temperature sensor pin A |
| 2 | T1B | 1st temperature sensor pin B |
| 3 | T2A | 2nd temperature sensor pin A |
| 4 | T2B | 2nd temperature sensor pin B |
| Pin Number | Name | Definition |
|---|---|---|
| 1 | D_N | CAN_L/RS485-B signal negative |
| 2 | D_P | CAN_H/RS485-A signal positive |
| 3 | GND | Signal ground |
| Pin Number | Name | Definition |
|---|---|---|
| 1 | VGPS | Power output (voltage close to B+) |
| 2 | TX | UART_TX, 3.3V |
| 3 | RX | UART_RX, 3.3V |
| 4 | GND | Power/signal ground |
| Pin Number | Name | Definition |
|---|---|---|
| 1 | VCC | Display power output |
| 2 | A | Display RS485 signal positive |
| 3 | B | Display RS485 signal negative |
| Pin Number | Name | Definition |
|---|---|---|
| 1-5 | HT- | Heater element negative electrode |
| 6 | CD+ | Charge indication input positive terminal |
| 7 | CD- | Charge indication input negative terminal |


6. Operating Instructions
6.1. Device Activation
Before powering on the protection board, ensure that the balance cable is correctly connected and that the P- and B- terminals are properly wired. Verify that the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or even damage.
The protection board does not have a physical power-on switch. It is designed for charging activation, meaning the charger voltage should be 2V higher than the battery voltage. After assembling the battery, connect the charger to activate the protection board.
Alternatively, the BMS can be activated via a key or an optional display screen. If you have a display screen and button, simply connect the cable to the display interface and press the button to activate.
6.2. APP Operation and Parameter Setting
The JIKONG BMS features a mobile APP for comprehensive control and monitoring. The APP supports both Android (minimum version 7) and iOS operating systems.

To install the APP, scan the QR code below:

Once installed, connect to the BMS via Bluetooth to access the following functions:
- Active Equalization: Set the balance trigger voltage difference (mV). When the difference between any two battery strings exceeds this value, balancing automatically activates. The default balance current is 0.6A. It is recommended that the balance current not exceed 0.2C of the battery capacity.
- GPS & Display Interface: The BMS has reserved ports for optional GPS modules and external display screens. Users can select these accessories to view battery information and track location as needed.
- Heating Function: If equipped, this function heats the battery in low temperatures to maintain activity. The designed heating current is 4A. Users can switch this function on/off via the APP. It is recommended to use a temperature control switch (45-65°C normally closed type) in series with the heating circuit for secondary protection.
- Overvoltage Protection: Set the single overcharge protection voltage and recovery voltage in the APP. The BMS will stop charging if any cell exceeds the set overvoltage and resume when all cells are below the recovery voltage.
- Undervoltage Protection: Set the battery undervoltage protection voltage, recovery voltage, and automatic shutdown voltage. The BMS will stop discharging if any cell falls below the protection voltage and resume when all cells are above the recovery voltage. If any cell drops below the automatic shutdown voltage, the BMS will shut down.
- Overcurrent Protection (Charge/Discharge): Set continuous charge/discharge current, overcurrent delay, and overcurrent release times. The BMS will trigger protection if current exceeds the set value for the specified delay and resume after the release time. Note: Max continuous discharge current should not exceed 150A/200A.
- Overtemperature Protection (Charge/Discharge): Set charge/discharge overtemperature protection and recovery temperatures. The BMS will stop operation if temperatures exceed the set limits and resume when they fall below recovery levels.
- Low Temperature Protection (Charge): Set charge low temperature protection and recovery temperatures. The BMS will stop charging if temperatures fall below the set limit and resume when they rise above recovery levels.
- Short Circuit Protection: This function is standard. Users can adjust the short circuit protection delay (µs) and recovery time (S) via the APP. If short circuit protection is triggered during initial charging or load connection, increasing the delay time may resolve issues caused by peak currents from chargers or capacitive loads.
- Discharge Precharge Function: This optional function has a default precharge time of 5 seconds. It can be enabled or disabled via the APP.
- Emergency Switch: This standard function allows the BMS to continue charge/discharge for 30 minutes in case of over-temperature, over-discharge, over-charge, or cell string drop issues, providing emergency operation time.
- Intelligent Sleep: This standard function puts the BMS into a low-power sleep mode if the charge/discharge current is less than 1A for 26 consecutive hours, reducing self-consumption. It can be reactivated by pressing a button or connecting a charger.
- Communication Function: The BMS supports optional CAN/RS485 communication. Users can select the desired protocol and set the address and communication parameters via the APP. Refer to the Jikong Protection Board communication protocol document for specific details.
7. Troubleshooting
This section provides guidance on common issues you might encounter with your JIKONG BMS.
7.1. Common Issues and Solutions
- BMS not activating after battery assembly: Ensure the balance cable is properly connected and P- and B- terminals are correctly wired. The BMS requires charging activation; connect a charger with a voltage 2V higher than the battery voltage to initiate operation. If using an optional display and button, ensure the cable is inserted and the button is pressed.
- Unexpected short circuit protection: If short circuit protection triggers during initial charging or load connection, it might be due to a peak current from the charger or a large capacitance in the load. Try increasing the short circuit protection delay time in the APP settings.
- BMS not balancing or balancing inconsistently: Verify that the active equalization function is enabled in the APP and that the basic battery parameters (like battery type and cell count) are correctly set. Check the balance trigger pressure difference and ensure it's appropriate for your battery.
- Temperature-related shutdowns: If the BMS is shutting down due to over-temperature or low-temperature protection, check the temperature sensor connections and the set temperature thresholds in the APP. For low-temperature issues, consider using the optional heating function if available.
- Communication issues (Bluetooth/RS485/CAN): Ensure the APP is correctly installed and updated. For Bluetooth, check that the BMS indicator is steady on when connected. For RS485/CAN, verify the correct protocol and address settings in the APP and ensure physical connections are secure.
7.2. Error Codes and Indicators
The LED Bluetooth status indicator provides basic operational feedback. For detailed error codes and diagnostics, refer to the JIKONG BMS mobile application, which offers real-time monitoring and alarm information.
8. User Tips
- Initial Setup Verification: Always double-check all wiring connections, especially the balance leads and main power terminals (P- and B-), before applying power to the BMS. Incorrect wiring can cause severe damage.
- APP Parameter Customization: Take advantage of the mobile APP to fine-tune protection parameters (e.g., overvoltage, undervoltage, overcurrent, temperature limits) to match your specific battery pack and application requirements.
- Temperature Management: In cold environments, consider utilizing the optional heating function to maintain battery performance and prevent charging issues. For safety, always use a temperature control switch in series with the heating circuit.
- Monitoring with APP: Regularly use the JIKONG SMART BMS APP to monitor your battery's status, including individual cell voltages, current, temperature, and cycle count. This helps in proactive maintenance and identifying potential issues early.
- PDF Manual Reference: A detailed user manual in PDF format is available for further reference. It contains in-depth information on advanced settings and specific configurations. You can access it via the link provided by the seller or by scanning the QR code for the APP.
9. Warranty and Support
For any technical support, warranty claims, or service inquiries, please contact JIKONG Official Store directly. Ensure you have your product model (JK-BD6A24S10P) and purchase details available when contacting support.
Manufacturer: Chengdu Jikong Technology Co., Ltd.