Introduction
Thank you for choosing the RiceBlock V12 Vision Car Technic Building Block Set. This manual provides essential information for assembling, operating, and maintaining your new remote-controlled model car. Please read these instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.
This set is designed for enthusiasts aged 14 and above, offering a challenging yet rewarding construction project that culminates in a functional, remote-controlled vehicle.
Package Contents
Before you begin, please verify that all components are present. The package typically includes:
- Building blocks (approximately 1148 pieces, may vary slightly by model variant)
- Remote Control unit
- Motor components
- Battery box for the car
- Detailed assembly instructions (physical booklet)
Note: Batteries are NOT included and must be purchased separately for both the car's battery box and the remote control unit.

Image: V12 Vision Car model (Black/Purple variant) with included remote control, battery box, and motors. Dimensions are shown as Length 36.5cm (14.4in), Width 18.5cm (7.3in), Height 9.9cm (3.9in).
Setup and Assembly
- Unpacking and Sorting: Carefully open the package and sort the building blocks by type or color as indicated in the included physical instruction booklet. This will significantly aid the assembly process.
- Assembly: Follow the step-by-step instructions provided in the physical manual. Pay close attention to the diagrams and ensure each piece is securely connected.
- Electronic Component Installation:
- Battery Box: Install the required batteries (e.g., AA or AAA, refer to the physical manual for exact type and quantity) into the car's battery box. Ensure correct polarity.
- Motors: Connect the motor components to the designated points on the car chassis as per the instructions.
- Remote Control: Install the required batteries into the remote control unit.
- Pairing the Remote Control: Once the car and remote control have batteries installed and all electronic components are connected, follow the pairing instructions in your physical manual. Typically, this involves turning on the car's power and then the remote control, allowing them to establish a connection.
Operating Instructions
Once assembled and paired, your V12 Vision Car is ready for operation.
- Power On: Ensure the car's battery box switch is in the 'ON' position and the remote control is powered on.
- Driving Controls: Use the joysticks or buttons on the remote control to maneuver the car:
- Forward/Backward: Typically controlled by one joystick (push forward/pull back).
- Turn Left/Right: Typically controlled by the other joystick (push left/right).
- Range: Operate the car within the effective range of the remote control, usually several meters, to maintain optimal responsiveness. Avoid obstacles and other electronic interference.
- Power Off: When finished, turn off both the car's power switch and the remote control to conserve battery life.
Maintenance
- Cleaning: Use a soft, dry cloth to gently wipe down the model. Avoid using water or chemical cleaners, as these can damage the blocks or electronic components.
- Storage: Store the assembled model in a cool, dry place away from direct sunlight and extreme temperatures. Disassemble if long-term storage is required, keeping all pieces organized.
- Battery Care: Remove batteries from both the car and the remote control if the model will not be used for an extended period to prevent leakage and damage.
- Component Check: Periodically check for any loose or damaged blocks and reattach or replace them as needed.
Troubleshooting
- Car Not Moving/Responding:
- Check if batteries are correctly installed and fully charged in both the car's battery box and the remote control.
- Ensure both the car and remote control are powered on.
- Re-attempt the pairing process as described in the assembly manual.
- Verify all motor connections are secure.
- Poor Performance/Weak Movement:
- Replace batteries with fresh ones.
- Ensure no blocks are obstructing the wheels or motor mechanisms.
- Missing or Damaged Parts: Refer to the contact information in the Warranty/Support section for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | riceblock |
| Model Name | V12 Vision Car Building Block Set |
| Number of Pieces | Approx. 1148 PCS (some variants may be 1039 PCS) |
| Dimensions (L x W x H) | 36.5 cm x 18.5 cm x 9.9 cm (14.4 in x 7.3 in x 3.9 in) |
| Power Source | Requires batteries (not included) for car and remote control |
| Recommended Age | 14+ years |
| Origin | Mainland China |
User Tips
- Organize Your Build: Before starting, sort all pieces into separate containers or bags. This makes finding specific blocks much faster and reduces frustration.
- Double-Check Connections: Especially for the electronic components (motors, battery box, remote), ensure all wires and connectors are firmly seated. A loose connection is a common cause of non-responsiveness.
- Patience is Key: Technic building sets can be complex. Take your time, follow the instructions step-by-step, and don't hesitate to retrace your steps if something doesn't look right.
- Battery Quality: Use high-quality batteries for both the car and remote control to ensure optimal performance and longer playtimes.
Warranty and Support
For any questions, concerns, or issues regarding your RiceBlock V12 Vision Car Technic Building Block Set, please contact the seller or manufacturer directly through your purchase platform. They can provide assistance with missing parts, technical support, and warranty claims if applicable.
Please retain your proof of purchase for any warranty or support inquiries.