August SE10B Portable CD and MP3 Player User Manual

Introduction

Thank you for purchasing the August SE10B Portable CD & MP3 Player. This user manual is designed to familiarize you with all the features of this device. Please take the time to read this user manual carefully, even if you are already familiar with a similar product.

Safety Instructions

To ensure the safety of yourself and others, please read the Safety Instructions before using this device. Do not disassemble the SE10B, as it can be unsafe and will invalidate the manufacturer's warranty.

Storage and Use

• Do not store or use this device in extreme temperatures.
• Do not expose this device to dust, oil, or smoke.
• Do not store or use this device in wet or damp environments.
• Do not drop or strike this device.
• When transporting this device, store it securely to avoid impact damage.
• Do not scratch this device with sharp objects.

Disposal

Please ensure the product and accessories are disposed of in compliance with the WEEE (Waste Electrical and Electronic Equipment) Directive and any other regulations applicable to your country. Always check with the environment agency and any other relevant authorities for current disposal regulations.

Product Overview

The August SE10B is a versatile portable CD and MP3 player designed for high-quality audio playback on the go or at home. It features:

• Built-in Stereo Speakers & 3.5mm Audio Jack
• Equalizer with 5 Sound Modes (Bass, Pop, Jazz, Rock, Classic)
• Adjustable Playback Speed
• Built-in Rechargeable Battery (up to 15 hours battery life)
• Electronic Skip Protection
• Micro SD/TF Card Reader for MP3 playback
• Supports CD, MP3 CD, CD-R, HDCD formats
• Backlit LCD display

Box Contents

The package includes the following items:

• August SE10B Portable CD and MP3 Player
• USB Charging Cable
• 3.5mm Audio Cable (AUX Cable)
• User Manual (this document, also available as PDF here)

Part Names and Functions

1. Micro SD/TF Card Slot
2. Power ON/OFF Switch
3. DC IN 5V Charging Port
4. Charging LED Indicator
5. Earphone Port
6. Speed Decrease Button
7. Speed Increase Button
8. Repeat A-B Button
9. Programme Button
10. Play/Pause Button
11. Stop Button
12. Previous Track Button
13. Next Track Button
14. EQ (Equalizer) Button
15. Mode Button
16. OPEN Button (for CD compartment)
17. HOLD ON/OFF Switch
18. Volume Increase/Decrease Dial

Setup

Charging the Player

The player has a built-in rechargeable lithium battery. To charge, connect the player to a USB power source (e.g., a computer USB port or a USB wall adapter) using the provided USB charging cable. The charging LED indicator will be red while charging and turn green when fully charged. A full charge takes approximately 4 hours, providing up to 15 hours of playback.

Power On/Off

• Power On: Toggle the power switch (2) on the side to the 'ON' position. If no disc is present or a disc has finished playing, the player will enter standby mode after 20 seconds. Press the Play button to restart.
• Power Off: For short-term standby, press the STOP button. For long-term storage, toggle the power switch (2) to the 'OFF' position.

Loading a CD

1. Push the OPEN button (16) to the right to open the CD compartment door.
2. Insert your index finger into the center hole of the disc and hold the edge of the disc with your thumb.
3. Place the disc upwards onto the spindle and gently press until it clicks into place.
4. Close the disc door gently. Ensure it is fully closed for proper playback.

Note: The SE10B is compatible with CD, CDR, MP3 & HDCD formats.

Inserting a Micro SD/TF Card

1. Locate the Micro SD/TF Card slot (1).
2. Insert the Micro SD/TF card with the arrow pointing towards the slot.
3. Carefully slide it into the slot until it clicks into place.
4. Turn on the player, then press and hold the Play/Pause button until 'Sd' displays to switch to Micro SD card mode.

Note: The SE10B is compatible with MP3 format in Micro-SD Card mode only.

Operating Instructions

Basic Playback Controls

• Play/Pause (10): Press to start or pause playback.
• Stop (11): Press to stop playback.
• Previous (12): Press to go to the beginning of the current track or the previous track.
• Next (13): Press to skip to the next track.

Volume Control

The volume dial (18) is located on the side of the SE10B. Rotate it to the left to decrease volume or to the right to increase volume. Listen at an appropriate volume to avoid hearing damage.

Equalizer (EQ)

Press the EQ button (14) to cycle through the 5 available sound modes: Bass, Pop, Jazz, Rock, and Classic. This allows you to adjust the audio output to your preference.

Repeat Modes

Press the MODE button (15) to cycle through different playback orders:

• REP1: Repeats the current song only.
• ALL: Repeats all songs on the disc/card.
• SHUF: Shuffles the playback order.
• INTRO: Plays the first 10 seconds of each track.

A-B Repeat Function

This function allows you to repeat a specific section of audio. This is useful for learning languages or instruments.

1. During playback, press the A-B button (8) at the beginning of the section you wish to repeat (point A).
2. Press the A-B button (8) again at the end of the section (point B). The player will repeat the selected section.
3. To resume normal playback, press the A-B button (8) once more.

Programme Mode

You can program a custom playback order for up to 30 tracks.

1. When playback is stopped, press the PROG button (9) to enter programming mode.
2. Use the Previous (12) or Next (13) buttons to select the desired track.
3. Press PROG (9) again to confirm the track.
4. Repeat steps 2-3 for up to 30 tracks.
5. After programming, press the Play button (10) to start programmed playback.
6. To cancel or reprogram, press the STOP button (11).

Bookmark Function

This function allows the player to resume playback from the last played track on a CD. In Micro-SD Card mode, it resumes playback from 5 seconds before the bookmark point.

• To activate/deactivate: Press and hold the PROG button (9). 'ON' or 'OFF' will be displayed. This function is ON by default.
• Note: To use the Bookmark function, power off the device by pressing the STOP button to enter standby mode. If the Power Switch is toggled to OFF, all settings will be erased.

Hold Function

After setting your desired playback mode and EQ, toggle the HOLD switch (17) to 'ON' to prevent accidental changes to settings during use.

Maintenance

Please unplug all leads before cleaning this device.

• Wipe the device and buttons with a soft, dry cloth.
• Never wipe this device with an abrasive cloth or apply detergent, alcohol, or chemical-based cleaning products.

Troubleshooting

Specifications

Warranty and Support

Warranty Information

This product is guaranteed for 12 months from the date of the original purchase. In the unlikely event of any defect arising due to faulty materials or workmanship, the unit will be either replaced or repaired free of charge (where possible) during this period. An alternative product will be offered in case the product is no longer available or repairable.

This warranty is subject to the following conditions:

• The warranty is only valid within the country where the product is purchased.
• The product must be correctly installed and operated according to the instructions given in this user manual.
• The product must be used solely for domestic purposes.
• The warranty only covers the main unit, and does not cover accessories.
• The warranty does not cover damage caused by misuse, negligence, accident, and natural disaster.
• The warranty will be rendered invalid if the product is resold or has been damaged by inexpert repairs. The manufacturers disclaim any liability for incidental or consequential damages.
• Please consult customer service before returning any product; unexpected product returns are not the responsibility of the manufacturer.
• Any faulty product must be kept and returned in the original packaging with all accessories and the original copy of the purchase receipt.

The warranty is in addition to, and does not diminish, your statutory or legal rights.

Customer Service

For further technical support or customer service, you can contact August International Ltd:

• Phone: +44 (0) 845 250 0586 (Carrier Rates Apply)
• Email: service@augustint.com
• Website: www.augustint.com

The Declaration of Conformity can be found on their website at http://augustint.com/en/declaration/.

User Tips

• For optimal sound quality, consider connecting the player to external speakers or a car stereo system using the 3.5mm AUX cable.
• When using the player in a car, ensure it is placed on a stable surface to minimize movement, even with electronic skip protection enabled.
• Experiment with the different EQ modes to find the best sound profile for your music genre.
• Utilize the A-B repeat function for focused listening, especially when studying audiobooks or learning new material.
• Remember to fully charge the device before extended use to enjoy the maximum 15 hours of battery life.