1. Product Overview
The Staniot WSR100 is a wireless outdoor strobe siren designed to enhance your home security alarm system. It features a high-decibel alarm and a flashing strobe light to deter intruders. Equipped with a solar panel and a built-in lithium battery, it offers reliable operation in various outdoor environments.

Figure 1: Staniot WSR100 Wireless Strobe Siren highlighting its key features.
This siren is designed to work in conjunction with a compatible home alarm system (e.g., Tuya Smart Home Burglar WiFi GSM Alarm System) and does not operate as a standalone device.
2. Setup Instructions
2.1 Pairing with an Alarm System
Follow these steps to pair the WSR100 siren with your compatible alarm panel:
- On your alarm panel, navigate to the 'Menu'.
- Select 'Accessory'.
- Choose 'Siren'.
- Select 'Type A'.
- Press 'Siren pair' on the alarm panel.
- Ensure the siren is powered on.
- On the siren, long press the 'Setting' button until you hear the second beep.
- Press 'OK' on the alarm panel to complete the pairing process.
Video 1: Demonstration of pairing the Staniot WSR100 siren with an alarm panel.
2.2 Physical Installation
The WSR100 siren is designed for wall-mounted installation. Choose a location that receives adequate sunlight for optimal solar charging and is suitable for broadcasting the alarm sound and strobe light effectively.
- Ensure the mounting surface is stable and secure.
- Mount the siren in a position where its solar panel (45° angle) can efficiently absorb solar energy.
- Consider the siren's waterproof design for outdoor placement.

Figure 2: Examples of suitable installation locations for the outdoor siren.
3. Operating Instructions
Once paired with your alarm system, the WSR100 siren will activate automatically when an alarm event is triggered by your main alarm panel. Upon activation, the siren will:
- Emit a high-decibel sound (up to 110dB) to alert occupants and deter intruders.
- Activate its integrated strobe light, providing a visual warning.

Figure 3: The siren operating in conjunction with a security panel during an alarm event.
The siren's alarm and strobe will cease once the alarm system is disarmed or the alarm duration expires, as configured in your main alarm panel settings.
4. Maintenance
- Solar Charging: The siren is equipped with a solar panel for continuous charging of its internal battery. Ensure the solar panel is kept clean and free from obstructions (e.g., dirt, leaves) to maximize charging efficiency.
- Battery: The siren has a built-in 1000mAh lithium battery, providing power backup. Regular exposure to sunlight is crucial for maintaining battery charge.
- Waterproof Design: The siren features a waterproof design, making it suitable for outdoor use in various weather conditions. No special waterproofing maintenance is required.
- Cleaning: Periodically wipe the siren's exterior with a soft, damp cloth to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.

Figure 4: The solar panel on the siren, designed for efficient energy absorption.

Figure 5: Internal battery capacity of the siren.
5. Troubleshooting
- Siren not pairing:
- Ensure the siren is powered on and within range of the alarm panel.
- Verify that you are following the pairing steps correctly as outlined in Section 2.1.
- Check if the alarm panel is in pairing mode.
- Siren not alarming/flashing:
- Confirm that the siren is successfully paired with your alarm system.
- Check the battery level of the siren. Ensure the solar panel is receiving sufficient sunlight.
- Test the alarm system to ensure it is triggering correctly.
- Low battery indication:
- Relocate the siren to an area with more direct sunlight.
- Ensure the solar panel is clean and unobstructed.
- Siren always connected to light (charging):
- The siren is designed to be continuously charged by its solar panel when exposed to light. This is normal operation and ensures the internal battery remains charged.
- No power supply:
- The primary power source for the siren is its solar panel and internal battery. It does not typically come with an external AC power adapter. Ensure the solar panel is functioning.
6. Specifications

Figure 6: Physical dimensions of the Staniot WSR100 siren.
| Feature | Specification |
|---|---|
| Model Number | WSR100 |
| Brand Name | staniot |
| Built-in Battery | 3.7V/1000mAh lithium battery |
| Maximum Output of Solar Panel | 5V/150mA |
| Standby Current | ≤350mA |
| Alarm Volume | 110dB |
| Wired Defense Zone | 2 (Z0, Z1) |
| Wireless Defense Zones | 25 |
| Working Temperature | -10°C ~ +50°C |
| Relative Humidity | <95% (no condensation) |
| Wireless Parameters | 433MHz, eV1527 |
| Smart Home Platform Compatibility | Tuya |
| Certification | CE |
| Dimensions (approx.) | 265mm (H) x 190mm (W) x 60mm (D) |
7. User Tips
- For optimal performance, ensure the siren's solar panel is positioned to receive maximum direct sunlight throughout the day. This will help maintain the internal battery's charge and ensure continuous operation.
- Remember that the WSR100 siren is an accessory and requires a compatible main alarm system (e.g., Tuya-enabled WiFi GSM alarm system) to function. It cannot operate independently.
- Regularly test your entire alarm system, including the siren, to ensure all components are working correctly.
8. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your complete alarm system or contact the Staniot customer service directly. Keep your purchase receipt for any warranty claims.