iCam365 4.3 inch LCD Wireless Digital Door Peephole User Manual

1. Introduction

The iCam365 ED-5001 is a 4.3-inch LCD wireless digital door peephole designed to enhance home security for apartments. It features a 3MP camera, two-way audio communication, infrared night vision, and PIR motion detection. With Wi-Fi connectivity, you can monitor your doorstep remotely via the iCam365 app on your iOS or Android device. The device is powered by a built-in 5000mAh lithium battery, offering a long operational life and easy recharging.

2. Package Contents

Please check the package for the following items:

• Indoor Unit (Mainframe with 4.3-inch LCD screen)
• Outdoor Camera (Peephole unit)
• Charging Cable (USB)
• Metal Bracket (Hanging plate)
• Screws (Various lengths for different door thicknesses)
• Instruction Manual

3. Specifications

4. Setup & Installation

Follow these steps to install your iCam365 digital door peephole:

1. Prepare the Outdoor Unit: Select two screws that fit your door's thickness. Insert these screws into the designated holes on the outdoor camera unit.
2. Thread Through Doorway: From the outside of the door, thread the cable and screws of the outdoor unit through the existing peephole.
3. Attach Hanging Plate: On the inside of the door, straighten the cable and thread the screws through the hanging plate.
4. Secure Hanging Plate: Use a screwdriver to tighten the screws, securing the hanging plate firmly to the door.
5. Connect Indoor Unit: Connect the cable from the outdoor unit to the corresponding port on the indoor mainframe. Ensure the connection is secure.
6. Mount Indoor Unit: Buckle the upper wire protection cover and then attach the indoor mainframe to the hanging plate. It should snap into place.

App Setup

To connect your device to the iCam365 app:

1. Download the iCam365 app from your device's app store (iOS or Android).
2. Open the app and create an account or log in.
3. Tap 'Add Device' and select the appropriate device type (e.g., Smart Camera (Wi-Fi)).
4. Follow the in-app instructions to reset the device if prompted.
5. Enter your 2.4 GHz Wi-Fi network details (5 GHz networks are not supported).
6. The app will generate a QR code. Present this QR code to the outdoor camera lens at a distance of 15-20 cm.
7. Once you hear a prompt indicating successful scanning, confirm in the app.
8. The device will connect to the network. Once connected, you can access the live feed and settings.

5. Operating Instructions

Live View & Two-Way Audio

Access the iCam365 app to view a live feed from your doorbell camera. Use the two-way audio feature to communicate with visitors at your door. The system supports noise cancellation for clear conversations.

PIR Motion Detection

The built-in PIR sensor detects motion near your door. When motion is detected, the camera automatically records a 20-second video clip and sends a notification to your phone. You can adjust the sensitivity of the PIR sensor in the app settings.

Night Vision

Equipped with 3 IR LEDs, the doorbell provides clear night vision, ensuring visibility even in low-light conditions.

Visitor Interaction

When a visitor presses the doorbell button, you will receive a video call notification on your phone, allowing you to see and speak to them directly.

Recording & Storage

The doorbell supports automatic picture and video recording when a visitor presses the doorbell or when motion is detected. Recordings can be stored in the cloud (subscription may be required) or on a local TF card (up to 128GB).

Multi-Device Sharing & View

The iCam365 app allows for multiple device sharing, enabling family members to view the camera feed and past video records simultaneously. The app also supports smart multi-view, allowing you to view feeds from up to 4 cameras at the same time.

6. Maintenance

Battery Charging

The device has a built-in 5000mAh lithium battery. To charge, connect the device using the provided USB cable to a 5V1A charger. It takes at least 5 hours for a full charge. Important: Do not use fast chargers, as this can damage the battery.

Cleaning

Wipe the outdoor camera lens and the indoor LCD screen with a soft, dry cloth to remove dust and smudges. Avoid using abrasive cleaners or solvents that could damage the surfaces.

7. Troubleshooting

• Device not powering on: Ensure the battery is charged. Connect the device to a 5V1A charger for at least 5 hours.
• Cannot connect to Wi-Fi: Verify that your Wi-Fi network is 2.4 GHz. 5 GHz networks are not supported. Ensure the Wi-Fi password is entered correctly in the app. Try resetting the device and re-pairing it with the app.
• Poor video quality: Check your Wi-Fi signal strength. A weak signal can affect video streaming. Ensure the camera lens is clean and free from obstructions.
• No motion detection alerts: Check the PIR sensitivity settings in the iCam365 app. Ensure motion detection is enabled.
• No video call when doorbell is pressed: Ensure the device is connected to Wi-Fi and the iCam365 app is running in the background or foreground on your phone with notifications enabled.

8. User Tips

• Battery Life: Expect 2-3 months of use from a fully charged 5000mAh battery, based on 5-10 events per day. Usage patterns may vary.
• Charging: Always use a 5V1A charger for recharging to prevent battery damage. Avoid fast chargers.
• Wi-Fi Stability: For optimal performance, ensure your doorbell is within a good range of your 2.4 GHz Wi-Fi router.

9. Safety Information

Please read and follow these safety guidelines:

• Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
• Keep the device away from water, moisture, and extreme temperatures.
• Use only the specified charging cable and a 5V1A power adapter for charging.
• Ensure proper ventilation around the device during operation and charging.
• Keep out of reach of children.

10. Compliance & Certifications

This device complies with relevant safety and environmental standards, including CE and FCC certifications.