1. Introduction
Thank you for choosing the Junsun X7 Series Car Multimedia Player. This device is designed to enhance your driving experience with advanced features such as a 2K HD screen, wireless CarPlay/Android Auto, GPS navigation, and a powerful Octa-core processor. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure you get the most out of your new car radio.
2. Package Contents
Please check the contents of your package against the list below. If any items are missing or damaged, please contact customer support.
- Junsun X7 Series Multimedia Player (Machine)
- Specific Frame for VW Passat B7 (or other compatible models)
- Additional Frames (9-inch, 10-inch, depending on model)
- Power Cable / Video Input Cable
- GPS Module
- Canbus Decoder
- 4G Module (if applicable)
- 4G SIM Cable (if applicable)
- USB Cables (4/6PIN)
- Rear Camera Input Cable (10PIN)
- Radio Antenna
- Instruction Manual (this document)

Figure 2.1: Typical package contents for Junsun X7 Series.
3. Specifications
| Brand Name | Junsun |
| Operating System | Android 12 |
| Processor Type | Octa-core A55 |
| Processor Speed | 1.6Ghz |
| RAM | 2G / 4G / 6G (model dependent) |
| ROM | 32G / 64G / 128G (model dependent) |
| Display Size | 9", 10", 11", 13.1" (model dependent) |
| Screen Type | 2K QLED HD Screen |
| Resolution | 1920*1200 (for 13.1"/11.5"), 1600*720 (for 10.33") |
| Touch Screen | Yes |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 2.5kg |
| Item Size | 13.1/11.5/10.33 inch (model dependent) |
| Max External Memory | 128G |
| Interface | USB, RCA |
| Special Features | Built-In Speaker/Microphone, WiFi, Steering Wheel Control, 3G/4G Network, Can-Bus, GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Remote Controller Included |
| Digital Media Format | CD |
| OSD Language | Multi-language support (Chinese, English, Arabic, German, French, etc.) |
| For Vehicle Brands/Model | Volkswagen Passat B6 B7 CC (2010-2015) |
| Certification | CE |
| Warranty | 2 Years |
4. Setup and Installation
4.1 Pre-Installation Notes
- During installation, if you find that some of your car's connectors are not compatible with the Android device accessories, please ignore them. Certain original car functions (such as the built-in microphone and GPS module) are already integrated into our Android device, so the corresponding original connectors do not need to be connected.
- If a specific accessory is not included in your package, it means your car model does not require it. Please ignore the corresponding connector on the device and proceed with the remaining installation steps.
- If the radio is working properly, please do not attempt to restore factory settings or update the firmware. This may cause some software to be lost or preset information to become invalid, which may result in the radio malfunctioning.
- If you encounter problems, contact Junsun Store online customer service.
4.2 Host Interface Definition and Wiring
Refer to the diagram below for the main unit's interface definitions and general wiring connections. Ensure all connections are secure before powering on the device.

Figure 4.1: Host interface definition and wiring diagram. This diagram shows connections for cooling fan, radio antenna, GPS antenna, 4G module, USB, Canbus, and RCA outputs. Pin definitions for GND, ACC, BACK, KEY1, FR-, FR+, FL-, FL+, B+, ILL, KEY2, ANT-12V, RL-, RL+, RR-, RR+ are also provided.
4.3 Accessories Connection Diagram
This diagram illustrates how to connect various accessories including USB cables, rear camera input, radio antenna, GPS antenna, and 4G module. The RCA cable definition is also provided.

Figure 4.2: Accessories connection diagram including USB cables (4/6PIN), Rear Camera Input Cable (10PIN), Radio Antenna, GPS Antenna, 4G Module, and RCA Cable definitions (AMP Control, Fan, AUX RIN/LIN, RCA FR/FL, Mic, AUX Out, Sub, AUX VIN/VIN2, 4G SIM).
4.4 GPS Antenna Installation
It is recommended to install the GPS antenna on the dashboard or rear shelf, on a leveled surface facing the sky to prevent signal blockage. If your vehicle has tempered glass or tint, consider installing the antenna outside the vehicle for better reception.
- Before affixing, clean the designated surface.
- Tear off the tape and press to place the GPS antenna.
- Route the cable through the storage box to the control panel and fix it with a cable tie.
- Connect the GPS antenna's plug to the machine.
Important Notes:
- Ensure the system power is off when connecting the GPS antenna.
- Do not shorten or extend the GPS cable, as this may cause malfunction.
- Install the antenna on a leveled surface to avoid affecting navigation accuracy.
- Do not interfere with the GPS antenna with the steering wheel or gear lever.
5. Operating Instructions
5.1 Basic Operation
- Power On/Off: When ACC is connected, press the power button on the front panel. To turn off, turn off the engine and unplug the car key.
- Volume Adjustment: Use the VOL+/VOL- buttons on the front panel.
- Mute Control: Press the volume button to display the volume bar, then press to mute.
- Backlight Control: Adjust in Display Settings under Car Settings.
- Camera: The screen automatically switches to rear view when the car is in reverse.
- Playback Memory: The system resumes to the last mode/channel/song played prior to shutdown.
5.2 Network & Internet
Go to Settings > Wi-Fi to enable Wi-Fi and connect to your desired network. You can also set up a personal hotspot and VPN.
5.3 Car Infotainment Settings
- Sleep Mode: Configure sleep duration in General Settings.
- Touch Assist: Enable/disable and customize touch assist options.
- Reverse Volume Control: Adjust volume suppression (None, Weak, Medium, Strong) when reversing.
- Restore Factory Setting: In General Settings, select to reset all settings to default.
5.4 Display and Volume
- Display Setting: Adjust background brightness for day and night.
- Volume Option: Adjust volume levels for various system functions.
5.5 Sound Effects
Access