1. Product Overview
The Yeelight LED Lightstrip Pro (Model YLDD005) is an advanced smart lighting solution designed to enhance your environment with dynamic and customizable illumination. Featuring addressable RGB LEDs, it can display 16 million colors and a variety of distinct lighting effects, including dynamic patterns like shooting stars, queues, and flowing water. This lightstrip offers seamless integration with popular smart home platforms and gaming ecosystems, providing versatile control and immersive experiences.



2. Package Contents
The Yeelight Lightstrip Pro package typically includes the following items:
- Yeelight Lightstrip Pro (2m standard length)
- Controller
- Connector
- Data cable
- Power cable
- Adapter (plug type subject to sales territory standard)
- User Manual
Optional accessories, such as the 1M Extension Strip, must be purchased separately.
3. Setup Instructions
Follow these steps to set up your Yeelight LED Lightstrip Pro:
- Connect the Adapter: Plug the adapter into the power cable. Rotate it by 45 degrees clockwise and snap it into place.
- Connect the Controller: Insert the end of the lightstrip with 4 pins into the corresponding socket on the controller, and fasten the buckle to secure it.
- Prepare Installation Surface: Clean the desired installation surface thoroughly.
- Attach Lightstrip: Carefully peel off the adhesive backing and paste the lightstrip onto the cleaned surface. Ensure it is fixed securely.
- Power On: Connect the power supply to an electrical outlet.

Extending the Lightstrip:
If you need to extend the lightstrip (up to a maximum of 10m / 32.9ft), you will need a Yeelight Lightstrip Pro Extension (sold separately).
- Open the tail end buckle of the original light strip and remove the tail plug.
- Connect the 4-pin end of the extension strip to the tail end of the original strip.
- Tighten the buckle to secure the connection.
- Install the tail plug at the new tail end of the extended strip and fasten the buckle.
4. Operating Instructions
Manual Control:

- Short press: Turn the light on/off.
- Double click: Change addressable lighting effects.
- Long press: Change colors.
Smart App Control:
The Yeelight Lightstrip Pro can be controlled via the Mi Home / Xiaomi Home app, allowing for advanced customization and smart features.


To use the app:
- Scan the QR code in the user manual (or search 'Mi Home / Xiaomi Home' in your app store) to download and install the app.
- Open the app, tap '+' on the upper right corner, and follow the prompts to add your device.
Voice Control and Smart Home Integration:
The lightstrip works with major smart home platforms for convenient voice control and automation.
- Apple HomeKit: Integrate with your Apple HomeKit ecosystem. To add to Siri Shortcuts, use the app.
- Google Assistant, Amazon Alexa, Samsung SmartThings: Control your lightstrip using voice commands through these platforms.


Immersive Gaming Experience:
The LED Light Strip Pro is compatible with gaming platforms like Razer Chroma RGB and Overwolf, allowing your lights to react to in-game events in real-time.

Currently supported PC games include League of Legends, Hearthstone, CS:GO, and Dota2. For other games, please refer to the Razer official website.
5. Troubleshooting
How to Reset:
If you encounter issues or need to reset your lightstrip, follow these steps:
- Disconnect the power supply from the lightstrip.
- Press and hold the power button on the controller.
- While holding the button, reconnect the power supply.
- Continue holding the button for five seconds until the lightstrip cycles through red, green, and blue, and then turns yellow.
- Release the button. The reset is complete.
Note: It is recommended to reset the lightstrip before using it in a new network environment.
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Yeelight |
| Model Number (Standard Pack 2m) | YLDD005 |
| Model Number (Extension Pack 1m) | YLDD007 |
| Wireless Communication | WiFi |
| Communication method | Wi-fi |
| Power Source | AC |
| Battery Included | No |
| State of Assembly | Ready-to-Go |
| Features | Flashing |
| Luminous Flux | 200 lm |
| Operating Temperature | -10~40°C |
| Frequency Bands | 2412MHz-2472MHz (Wi-Fi), 2402MHz-2480MHz (BT) |
| Rated Input (2m) | 24 VDC, 0.21A, 5.1W |
| Rated Input (10m) | 24 VDC, 0.88A, 21W |
| Rated Input (Adapter 2m) | 100-240V~50/60Hz, 0.06A, 5.5W |
| Rated Input (Adapter 10m) | 100-240V~50/60Hz, 0.25A, 24W |
| Maximum Output Power (Wi-Fi) | 18 dBm |
| Maximum Output Power (BT) | 6 dBm |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 4.2 BLE |
| System Requirements | Android 4.4 & iOS 10.0 or above |
7. User Tips
- Extension Strip Usage: The 1M Extension Strip cannot be used independently; it requires connection to the Lightstrip Pro version. When selecting the '1M Extension Strip' option, only the extension strip is included, not the main lightstrip.
- Activating Extensions: After connecting an extension package, ensure the tail plug is correctly inserted at the end of the light strip. Then, power cycle the device (power off and restart) to activate the extension package.
- Customizing Cut Lengths: If you trim the light strip, go to the Mijia APP to set the new length of the cut light strip. Power cycle the device to activate this setting.
- HomeKit Compatibility: For proper HomeKit compatibility, it is recommended to use iOS 9 or above. HomeKit codes are required for each reset.
- Network Requirements: Ensure your Wi-Fi network is available and has internet access. This product is not compatible with 5G networks.
8. Warnings and Safety Information
Please read and adhere to the following warnings to ensure safe operation and prevent damage:
- Check the voltage before using the product. Improper voltage may damage the product and cause potential safety hazards.
- For indoor use only.
- To prevent early product failure, the lightstrip should only be installed in operating environments ranging between -10°C to +40°C.
- The lightstrip is not waterproof.
- Regularly check the cable, the power supply, and all other parts. Do not use this luminaire if any part is damaged.
- The external flexible cable or cord of this luminaire cannot be replaced. Do not use the luminaire if the cable or cord is damaged.
- The lightstrip is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
- Do not disassemble the product privately.
- Keep the lightstrip away from kids under 3 years old.
- Maximum interconnected length is 10m (400in).
- Do not bend the LED inside the lightstrip in more than 90 degrees to avoid any possible damage.
- Do not connect the lightstrip to the power supply when it is in the package.
- Interconnection shall be made only by the use of the supplied connectors. Any open end must be sealed-off before use.
- Do not use the lightstrip when covered or recessed into a surface.
- Do not open or cut the lightstrip.
- Under normal use conditions, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
9. Compliance Information
FCC Compliance Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
EU Declaration of Conformity:
Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type YLDD005 is in compliance with Directive 2014/53/EU.
WEEE Disposal and Recycling:
Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
10. Further Support
For additional detailed instructions and information, please refer to the official user manual PDF available at: Yeelight Lightstrip Pro User Manual (PDF).
For warranty information and customer support, please contact your retailer or the manufacturer directly.