KKMOON FJ3396C

Contents

FJ3396C Digital Weather Station Alarm Clock User Manual

Model: FJ3396C | Brand: KKMOON

1. Introduction

The FJ3396C Digital Weather Station Alarm Clock is a versatile electronic device designed for household use, providing accurate temperature, humidity, and weather forecast information. It features a large LCD touch screen, supports up to three wireless outdoor sensors, and includes an alarm clock with snooze functionality. This manual will guide you through the setup, operation, and maintenance of your device.

FJ3396C Digital Weather Station Alarm Clock with wireless sensor
Figure 1: FJ3396C Digital Weather Station Alarm Clock with Wireless Sensor

2. Package Contents

Depending on your purchase, your package may contain the following items:

Weather Station Set:

  • 1 x Digital Alarm Clock (Weather Station)
  • 1 x USB Cable
  • 1 x Wireless Outdoor Sensor (Black or White, depending on selection)
  • 1 x User Manual (En, DR, FR, ES, IT)

Sensors Only (Black or White):

  • 1 x Wireless Outdoor Sensor (Black or White, depending on selection)

Note: Batteries are not included in any package.

3. Specifications

FeatureDetail
Model NumberFJ3396C (Electronic Alarm Clock)
Brand NameKKMOON
TheoryThermometer Hygrometer
Display TypeDIGITAL
Max Measuring Temperature49°C & Under
Indoor Temperature Range-9.9°C (14.2°F) ~ 50°C (122°F)
Outdoor Temperature Range-40°C (-40°F) ~ 70°C (158°F)
Humidity Range20%RH ~ 95%RH
Wireless RF Transmitting Frequency433.92MHz
Wireless Transmission Range60 meters (open area)
Waterproof Rating (Sensor)IPX4
Power Supply (Weather Station)2 x AAA Batteries (not included) or USB cable
Power Supply (Remote Sensor)2 x AA Batteries (not included)
Dimensions (Weather Station)Approx. 15.2cm (L) x 9.6cm (H) x 6.1cm (W)
Weight (Weather Station)Approx. 453g / 16oz (Package Weight)
Dimensions (Sensor)Approx. 10.5cm (L) x 4.5cm (W) x 6cm (D)
Weight (Sensor)Approx. 73g / 2.57oz (Package Weight)
Indoor and Outdoor Temperature Measurement Ranges
Figure 2: Display showing indoor and outdoor temperature ranges.
Weather Station Dimensions
Figure 3: Weather Station dimensions.

4. Setup

4.1 Powering the Weather Station

  1. Battery Power: Insert 2 x AAA batteries (not included) into the battery compartment of the weather station. When powered by batteries, the backlight will briefly illuminate when touched.
  2. USB Power: Connect the provided USB cable to the weather station and a suitable USB power adapter (not included). When using USB power, the backlight will remain continuously on.
Video 1: Product demonstration showing power options and backlight behavior.

4.2 Setting up the Wireless Outdoor Sensor

  1. Insert 2 x AA batteries (not included) into the wireless outdoor sensor.
  2. Place the sensor in an outdoor location where it is protected from direct sunlight and rain, but can still transmit data to the main unit. The sensor has an IPX4 waterproof rating, making it suitable for outdoor use.
  3. Ensure the sensor is within 60 meters (in an open area) of the main weather station for optimal signal reception.
Wireless Outdoor Sensor placement and features
Figure 4: Wireless Outdoor Sensor features and recommended placement.

4.3 Pairing Additional Sensors (Optional)

The weather station can support up to 3 wireless outdoor sensors. If you have additional sensors, they should automatically pair with the main unit once powered on and within range. The display will show readings for CH1, CH2, and CH3.

Weather station showing 3 sensor channels
Figure 5: Weather station display indicating multiple sensor channels.

5. Operating Instructions

5.1 Display Overview

The large LCD screen displays the following information:

  • Time (12/24 hour format)
  • Date and Day of the week
  • Indoor Temperature and Humidity
  • Outdoor Temperature and Humidity (from wireless sensor)
  • Weather Forecast (Sunny, Cloudy, Overcast, Rain, Ice Alert)
  • Barometric Pressure
  • Moon Phase
  • Humidity Comfort Levels (DRY, OK, WET)
Weather station display with weather forecast icons
Figure 6: Weather forecast icons (sunny, cloudy, overcast, rain, ice alert).
Weather station display with humidity comfort levels
Figure 7: Humidity comfort levels (DRY, OK, WET) on the display.

5.2 Backlight Control

The LCD touch screen has 4 backlight levels (high/medium/low/off). Touch the screen to activate or adjust the backlight. When using battery power, the backlight works briefly. When using USB power, the backlight is always working and its brightness can be adjusted.

5.3 Setting Time and Date

Refer to the included User Manual (En, DR, FR, ES, IT) for detailed instructions on setting the time, date, and 12/24 hour format. The perpetual calendar supports dates up to the year 2099.

5.4 Alarm Clock Function

The device features a dual alarm clock. Consult the user manual for specific steps to set alarms and configure the snooze time (1-30 minutes or OFF).

5.5 Temperature and Humidity Display

The weather station displays both indoor and outdoor temperature and humidity. You can switch between Celsius (°C) and Fahrenheit (°F) display modes as per your preference.

5.6 Weather Prediction

The weather station forecasts weather conditions for the next 12 hours based on changes in temperature, humidity, and barometric pressure. The display will show one of five weather icons: sunny, cloudy, overcast, rain, or ice alert.

6. Maintenance

  • Cleaning: Wipe the device and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement: Replace batteries in both the main unit and the wireless sensor when the low battery indicator appears on the display. Ensure correct polarity when inserting new batteries.
  • Sensor Placement: Periodically check the outdoor sensor's placement to ensure it remains protected from extreme weather and maintains a clear signal path to the main unit.

7. Troubleshooting

ProblemPossible CauseSolution
No display on weather stationNo power or dead batteries.Insert fresh AAA batteries or connect the USB cable to a power source.
Outdoor temperature/humidity not displayedSensor out of range, dead sensor batteries, or pairing issue.Check sensor batteries, move sensor closer to the main unit, or re-pair the sensor (refer to the full user manual for pairing instructions).
Backlight not staying onUsing battery power.This is normal behavior for battery power. For continuous backlight, use USB power.
Inaccurate readingsSensor exposed to direct sunlight/rain or placed near heat sources.Relocate the outdoor sensor to a shaded, protected area. Ensure proper ventilation around the indoor unit.

8. User Tips

  • For continuous backlight and optimal visibility, always use the USB power option for the main weather station.
  • When placing the outdoor sensor, consider locations that are easily accessible for battery changes but still provide accurate environmental readings.
  • If you plan to use multiple outdoor sensors, ensure they are all within the 60-meter transmission range of the main unit.

9. Warranty and Support

For warranty information and technical support, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.