1. Product Overview
The Feyree EVSE Wallbox Type2 Cable EV Charger is an intelligent charging station designed for electric vehicles, offering various power capacities (7.6KW, 11KW, 22KW) and smart control features. It is built with high-quality materials and multiple protection mechanisms to ensure safe and efficient charging.
Key Features:
- Faster Charging Speed: Available in 7.6KW, 11KW, and 22KW models to suit various EV charging needs.
- Smart and Intelligent Design: Equipped with an intelligent chip to monitor voltage, current, charging time, and power consumption.
- Convenient WiFi Connectivity: Control and monitor charging remotely using the free Tuya Smart app. Features include charge notifications, current setting, and scheduling.
- Multiple Protection: Provides lightning-proof, leakage, overvoltage, overheat, IP66 waterproof, UL94V-0 flame resistance, and overcurrent protection.
- Control Box Functions: Includes leakage protection (restart recover), overvoltage/undervoltage protection (self-checking recover), lightning protection, overheat protection, ground protection, adjustable current (8A-32A), RFID card function, and charging time scheduling.
2. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your EV charger. It is recommended that installation be performed by a qualified electrician.
2.1 Physical Installation
The charger is designed for wall-mounted installation. Ensure the mounting location is suitable for the charger's dimensions and environmental conditions.
2.2 Electrical Wiring
Connect the charger to your electrical system according to the appropriate wiring diagram for your model (7.6KW 1-Phase, 11KW 3-Phase, or 22KW 3-Phase). Always ensure the main power supply is disconnected before performing any wiring.
2.3 Initial App Connection
The charger supports both WiFi and Bluetooth connectivity for app control. For initial setup or when WiFi is unavailable, Bluetooth can be used.
2.4 RFID Card Management
You can add or delete RFID cards to control access to the charger.
- Long press any button on the charger for 5 seconds to enter the settings interface.
- Navigate to 'Rfid Manage' using the display buttons.
- Select 'Add Card' or 'Delete Card'.
- For 'Add Card', swipe a blank RFID card to register it. Up to 10 additional RFID cards can be added.
- For 'Delete Card', select the card you wish to remove from the list.
3. Operating Instructions
The Feyree EV charger offers multiple ways to initiate and manage charging sessions.
3.1 Charger Display and Controls
The 2.8-inch LCD display provides real-time charging information and access to settings.
3.2 Charging Modes
The charger supports four primary charging modes:
- WiFi App Control: Manage charging remotely via the Tuya Smart app when connected to WiFi.
- Bluetooth App Control: Control the charger via the Tuya Smart app using Bluetooth, especially useful when WiFi is not available.
- RFID Card: Tap a registered RFID card to start or stop charging.
- Plug and Play: Simply plug in the charging cable to begin charging (if RFID function is disabled).
3.3 Smart Scheduling and Remote Control
Utilize the Tuya Smart app for advanced charging management:
- Schedule Charging: Set specific times for charging to take advantage of off-peak electricity rates.
- Real-Time Monitoring: View live charging status, including voltage, current, power, and temperature.
- Remote Start/Stop: Initiate or terminate charging sessions from your mobile device.
- Delay Charging: Set a delay before charging begins.
3.4 Adjusting Charging Current
The charging current can be adjusted from 8A to 32A via the charger's control panel or the mobile app.
3.5 Enabling/Disabling RFID Function
To toggle the RFID card function:
- Long press any button on the charger for 5 seconds to enter the settings page.
- Navigate to 'Setting' and then 'CardID Check'.
- Toggle the 'CardID Check' option ON or OFF to enable or disable RFID card usage.
3.6 Unbinding Mobile App
If you need to bind a different phone to the charging station, you must first unbind the current phone:
- Access the charger's settings menu (long press for 5 seconds).
- Navigate to 'Setting' and then 'Reset Wifi'.
- Confirm the reset to unbind the current mobile app connection.
4. Maintenance
To ensure the longevity and optimal performance of your Feyree EV charger, follow these maintenance guidelines:
- Cleaning: Regularly wipe the exterior of the charger with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Cable Care: Inspect the charging cable periodically for any signs of wear, damage, or fraying. Ensure the cable is not kinked or run over by vehicles.
- Environmental Protection: The charger is rated IP66, making it suitable for outdoor use and resistant to dust and water jets. However, avoid submerging the unit or exposing it to extreme physical impact.
- Material Durability: The charger utilizes high-quality TPU material for the cable, offering excellent aging resistance, flame resistance, and low-temperature performance. The charging pins are silver-plated copper alloy for better conductivity.
5. Troubleshooting
This section addresses common issues you might encounter with your EV charger.
5.1 Intelligent Temperature Protection
The charger features intelligent temperature protection. If the internal temperature exceeds 85°C, charging will automatically stop. Charging will resume automatically once the temperature drops to 65°C.
5.2 Safety Protections
The charger is equipped with multiple safety features. If charging stops unexpectedly, check the display for any error messages or indicators related to these protections:
- IP65 Waterproof (Note: Some images state IP66, refer to specifications for exact rating)
- Leakage Protection
- Lightning Protection
- Over-Voltage Protection
- Over-Current Protection
- Over-Temperature Protection
- Short Circuit Protection
- Compression Protection
5.3 App Connectivity Issues
- Ensure your phone's WiFi or Bluetooth is enabled.
- Verify the charger is within range for Bluetooth connection (within 10 meters).
- If using WiFi, ensure the charger is connected to a stable network.
- If issues persist, try unbinding and re-binding the app as described in Section 3.6.
6. Specifications
Below are the detailed specifications for the Feyree EVSE Wallbox Type2 Cable EV Charger, available in different power configurations.
General Specifications:
| Attribute | Value |
|---|---|
| Brand Name | feyree |
| Charger Type | Charging Station |
| Charging Type | Type2 IEC 62196-2 |
| Current | 8A-10A-13A-16A-20A-25A-32A Adjustable |
| Operating Temperature | -30°C to 55°C |
| Cable Length | 5m |
| IP Rating (Charger Plug) | IP66 |
| IP Rating (Charger Box) | IP66 |
| Leakage Protection | Type B AC 30mA + DC 6mA |
| Material | Copper alloy, silver plating (pins) |
| Dimensions (L x W x H) | 46cm x 40cm x 10cm (approximate, based on package) |
| Weight | 4.5kg (approximate) |
Model-Specific Specifications:
7. Warranty and Support
The Feyree EVSE Wallbox Type2 Cable EV Charger comes with a 2-year warranty, ensuring peace of mind regarding product quality and performance.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Feyree customer service channel provided at the point of purchase.
8. User Tips
- Professional Installation: Always ensure the charger is installed by a certified electrician to guarantee safety and compliance with local electrical codes.
- Optimize Charging Schedules: Use the Tuya Smart app to schedule charging during off-peak electricity hours to save on energy costs.
- Keep RFID Cards Handy: If you prefer RFID card activation, keep your registered cards in an easily accessible location for quick charging initiation.
- Monitor Charging Status: Regularly check the charger's display or the mobile app for real-time charging data and to ensure optimal performance.
- Regular Inspections: Periodically inspect the charging cable and plug for any signs of wear or damage to prevent potential hazards.
