AVATTO WT498

Contents

AVATTO WT498 Tuya WiFi Smart Thermostat Instruction Manual

RF Wireless Receiver Temperature Controller for Water and Gas Boilers

1. Introduction

The AVATTO WT498 is a smart WiFi thermostat system designed to provide precise and convenient temperature control for water and gas boilers. It features an RF433 wireless connection between the thermostat unit and the receiver, eliminating the need for extensive wiring. With support for the Smart Life/Tuya app, Amazon Alexa, Google Home, and Yandex Alice, you can manage your home's heating from anywhere, anytime, using your smartphone or voice commands. This manual provides detailed instructions for installation, operation, and maintenance of your AVATTO WT498 thermostat.

AVATTO WT498 Thermostat and RF Receiver with smart home logos

Figure 1: AVATTO WT498 Thermostat and RF Receiver

2. Package Contents

  • 1 x AVATTO WT498 Wireless Thermostat
  • 1 x RF Receiver
  • 1 x USB Type-C Power Cable (for thermostat)
  • 1 x User Manual (this document)
  • Mounting Screws and Anchors

3. Specifications

FeatureSpecification
Model NumberWT498
Brand NameAVATTO
OriginMainland China
CertificationCE
Temperature SensorNTC
Thermostat Power3 x 1.5V AA Batteries or Type-C USB
Temperature Precision±1°C
Load Current (Receiver)3A (negative)
Self-Consumed Power<170uW
Protection GradeIP20
Temperature Hysteresis0.5~10°C
Minimum Temperature Setting0.5°C
Upper/Lower Temperature Limits5~95°C
RF Thermostat Dimensions8.6cm (W) x 8cm (D) x 10.5cm (H)
RF Receiver Dimensions8.6cm (W) x 2.8cm (D) x 8.6cm (H)
Wireless CommunicationRF433 (Thermostat to Receiver), WiFi (Receiver to Router)
App CompatibilitySmart Life / Tuya Smart
Voice Assistant SupportAmazon Alexa, Google Home, Yandex Alice
Dimensions of RF Thermostat and RF Receiver

Figure 2: Product Dimensions

Thermostat display and button functions

Figure 3: Thermostat Display and Controls

4. Setup Instructions

4.1 RF Receiver Wiring

The RF Receiver is the central control unit that connects to your boiler or actuator. Ensure power is OFF before performing any wiring. It is recommended that a qualified electrician performs the installation.

  • For Boiler Connection: Connect the Live (L) and Neutral (N) wires from your power supply to the corresponding terminals on the receiver. Connect the boiler's control wires to the output terminals as shown in the diagram.
  • For Actuator Connection: Depending on your actuator type (Normally Open - NO or Normally Closed - NC), connect the power supply and actuator wires to the appropriate terminals on the receiver as illustrated.
Wiring diagram for connecting RF Receiver to a boiler

Figure 4: Wiring Diagram for Boiler

Wiring diagram for connecting RF Receiver to an electric actuator (NO and NC types)

Figure 5: Wiring Diagram for Actuator (NO/NC)

After wiring, ensure all connections are secure and turn on the power. The receiver has indicator lights for Output, Wireless, and Power.

4.2 Thermostat Powering

The wireless thermostat unit can be powered by three 1.5V AA batteries or via a Type-C USB cable. Insert batteries into the compartment or connect the Type-C cable to the port on the side of the unit.

Side view of the thermostat showing battery compartment and Type-C charging port

Figure 6: Thermostat Power Options

4.3 App Installation and Pairing

To utilize smart features, download the "Smart Life" or "Tuya Smart" app from your smartphone's app store (iOS or Android). Follow the in-app instructions to add your device. The receiver will connect to your home WiFi network (2.4GHz only). The thermostat communicates wirelessly with the receiver via RF433.

Smartphone displaying Tuya/Smart Life app interface for remote control of the thermostat

Figure 7: App Remote Control

5. Operating Instructions

5.1 Control Modes

The thermostat offers three operational modes:

  • Manual Mode: Set a desired temperature manually, and the thermostat will maintain it until changed.
  • Program Mode: Follows a pre-set schedule of temperatures throughout the day and week.
  • Temporary Mode: Allows a temporary override of the Program Mode. The thermostat will revert to the program schedule after a set duration or the next scheduled event.
App screenshot showing the mode selection (Manual, Auto, Temporary)

Figure 8: Mode Selection in App

5.2 Programming Schedule

In Program Mode, you can set a detailed heating schedule. The thermostat supports 5+2 (weekday/weekend), 6+1 (weekdays/Saturday/Sunday), or 7-day programming, with up to 6 time periods daily. Each period allows for a different temperature setting.

App screenshot showing the programming mode (weekday setting)

Figure 9: Programming Mode (Weekday Setting)

5.3 Voice Control

Integrate your thermostat with Amazon Alexa, Google Home, or Yandex Alice for convenient voice control. Once linked through the Smart Life/Tuya app, you can use commands like "Alexa, set the temperature to 22 degrees Celsius" or "Hey Google, what's the living room temperature?"

User interacting with Alexa for voice control of the thermostat

Figure 10: Voice Control with Smart Assistants

5.4 Temperature Calibration

If you notice a discrepancy between the thermostat's displayed temperature and the actual room temperature, you can calibrate it. This feature allows you to adjust the temperature reading by -9.9°C to 9.9°C within the app settings.

Screenshot of the app showing temperature correction settings

Figure 11: Temperature Calibration in App

5.5 Child Lock

Activate the Child Lock function via the app to prevent accidental changes to settings by children. This locks the physical controls on the thermostat unit.

Image depicting the child lock feature on the app

Figure 12: Child Lock Feature

5.6 Group Control

For homes with multiple AVATTO thermostats, the Group Control function allows you to manage several thermostats simultaneously within the app. This is useful for controlling heating in different zones or rooms with a single command.

Diagram illustrating the group control function for multiple thermostats in different rooms

Figure 13: Group Control Function

5.7 Family Share

Share control of your smart thermostat with family members through the app. This allows multiple users to manage the heating settings from their own devices, creating a collaborative smart home environment.

Illustration of the family sharing function for smart home devices

Figure 14: Family Share Function

6. Maintenance

  • Cleaning: Wipe the thermostat and receiver surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement: If using AA batteries, replace them when the low battery indicator appears on the thermostat display. Ensure correct polarity.
  • Firmware Updates: Periodically check the Smart Life/Tuya app for available firmware updates for your device to ensure optimal performance and access to new features.

7. Troubleshooting

Q: The app cannot connect to the device, and there is no QR code.
A: Ensure your home WiFi network is 2.4GHz, as most smart home devices do not support 5GHz. Refer to the app's pairing instructions, which usually involve a reset process on the receiver to enter pairing mode. The app name is typically "Smart Life" or "Tuya Smart".
Q: Does it work with 5GHz WiFi?
A: No, the AVATTO WT498 receiver connects to 2.4GHz WiFi networks only. Ensure your router is configured to broadcast a 2.4GHz signal or that your phone is connected to the 2.4GHz band during setup.
Q: How does temperature calibration work? The option is not available in the app.
A: The temperature calibration feature is available within the Smart Life/Tuya app under the thermostat's settings. Look for "Temp Correction" or similar options, as shown in Figure 11. If you cannot find it, ensure your app and device firmware are up to date.
Q: Is it compatible with a 24V Carrier DX unit AC? Can I connect two thermostats to one receiver?
A: This thermostat is designed for water and gas boilers, not typically for 24V AC units. Compatibility with AC systems is not guaranteed. Each thermostat unit requires its own dedicated RF receiver for proper operation and control.
Q: Can I connect the receiver to 220V AC?
A: Yes, the receiver is designed to be wired into your boiler's power supply, which is typically 220V AC in many regions. Always ensure wiring is done by a qualified professional and power is disconnected during installation.

8. User Tips

  • Optimal Placement: Place the wireless thermostat in a central location in the room, away from direct sunlight, drafts, or heat sources, to ensure accurate temperature readings.
  • WiFi Network: For stable connectivity, ensure your 2.4GHz WiFi network has good signal strength where the receiver is installed.
  • App Exploration: Take time to explore all the features within the Smart Life/Tuya app, including advanced programming, scene creation, and automation, to maximize your thermostat's potential.
  • Battery Life: While the thermostat can be powered by batteries, using the Type-C USB power cable can provide continuous operation without needing battery replacements.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.