JIKONG JKBMS Smart Active Balance BMS (4S-24S)

Contents

JIKONG Smart Active Balance BMS User Manual

Models: JK-B1A8S10P, JK-B1A8S20P, JK-B2A8S20P, JK-B2A8S30P, and other 4S-24S variants

Brand: JIKONG

1. Introduction

The JIKONG Smart Active Balance Battery Management System (BMS) is an advanced solution designed to protect and optimize the performance of various battery chemistries, including Li-Ion, LiFePO4, and LTO. This intelligent system supports battery configurations from 4S to 24S and offers continuous current ratings from 40A to 300A, depending on the model. It features active balancing technology, comprehensive protection functions, and smart monitoring capabilities via mobile app and PC software.

This manual provides essential information for the safe and effective installation, operation, and maintenance of your JIKONG Smart Active Balance BMS.

2. Safety Information

Please read and understand all safety instructions before installing or operating the BMS. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

  • Always wear appropriate personal protective equipment (PPE), including safety glasses and insulated gloves, when working with batteries and electrical systems.
  • Ensure all power sources are disconnected before performing any installation, wiring, or maintenance.
  • Avoid short-circuiting battery terminals or BMS connections.
  • Do not expose the BMS to water, moisture, or extreme temperatures outside its operating range.
  • Handle battery cells with care. Damaged cells can be dangerous.
  • Ensure proper ventilation during battery charging and discharging.
  • Only use the BMS with compatible battery types and configurations as specified in the product documentation.
  • Keep out of reach of children.

3. Product Overview

The JIKONG Smart Active Balance BMS is engineered for high-efficiency performance and reliability. It integrates a main control chip (MCU) and robust components within a durable aluminum alloy shell for superior heat dissipation.

Key Features:

  • Active Balancing: Achieves voltage balance with minimal energy loss by transferring energy from higher-energy cells to lower-energy cells. Balancing currents typically range from 1A to 2A.
  • Comprehensive Protection: Includes overcharge protection, over-discharge protection, overcurrent protection, short circuit protection, and temperature protection.
  • Smart Monitoring: Connects via Bluetooth to a mobile app (iOS/Android/HarmonyOS) and PC software for real-time data display and parameter adjustment.
  • Multiple Interfaces: Supports various communication modes including RS485, CAN, Bluetooth (BT), NTC, Soft Switch, SOC Indicator, Key Switch, and Active Equalizer.
  • High-Quality Construction: Features selected core components and an aluminum alloy casing for enhanced durability and thermal management.

Product Components:

Exploded view of JIKONG BMS components including cooling aluminum alloy, MOS, JIKONG MCU, NTC, and sampling line.

Figure 1: Exploded View of BMS Components

Internal view of JIKONG BMS showing the main control unit (MCU) and other electronic components.

Figure 2: Internal View of BMS with MCU

Packing List:

Packing list for JIKONG BMS showing 1 BMS unit, 1 sampling line (70cm), 1 NTC (40cm), and 1 switch (50cm).

Figure 3: Standard Packing List

  1. BMS x 1
  2. Sampling line x 1 (long 70cm)
  3. NTC x 1 (long 40cm)
  4. Switch x 1 (long 50cm)

Available Accessories:

JIKONG offers various accessories to enhance your BMS experience, including different display sizes, switch keys, and RS485 modules.

JIKONG BMS Accessories including 2.5 Inch Display, Switch Key, RS485 module, Interface Board, 4.3 Inch Touch Display, and 3.2 Inch Display.

Figure 4: JIKONG BMS Accessories

4. Specifications

Note: Data tolerance range is ±2mm.

Table of JIKONG Product Specifications for models JK-B1A8S10P, JK-B1A8S20P, JK-B2A8S20P, JK-B2A8S30P, detailing battery strings, balance method, current, protection, interfaces, size, voltage range, and functions.

Figure 5: JIKONG Product Specifications Table

JIKONG Product Specifications (Example for 8S models)
Technical IndexJK-B1A8S10PJK-B1A8S20PJK-B2A8S20PJK-B2A8S30P
Number of Battery Strings (Li-Ion)3S-8S3S-8S3S-8S3S-8S
Number of Battery Strings (LiFePO4)4S-8S4S-8S4S-8S4S-8S
Number of Battery Strings (LTO)6S-8S6S-8S6S-8S6S-8S
Balance MethodActive Balance (Full State On)
Balance Current1A1A2A2A
Continuous Discharge Current100A200A200A300A
Continuous Charge Current100A200A200A300A
Maximum Discharge Current (MAX 2min)200A300A300A400A
Over Charge Protection (ADJ)10-100A (Adjustable)
Other Interfaces (Customized)RS485
Other Interfaces (Customized)CANBUS HEAT
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Acquisition Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection1 Pcs
Temp ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android iOS

Dimensions:

Dimensions vary by model. Please refer to the specific model for exact measurements.

Dimensions for JIKONG BMS model JK-B1A8S10P: 105mm width, 87mm internal width, 153.9mm height, 17.6mm thickness.

Figure 6: Dimensions for JK-B1A8S10P

Dimensions for JIKONG BMS model JK-B2A8S20P: 126mm width, 108mm internal width, 153mm height, 17.6mm thickness.

Figure 7: Dimensions for JK-B2A8S20P

Dimensions for JIKONG BMS model JK-B2A8S30P: 127.26mm width, 107.26mm internal width, 174.77mm height, 17.6mm thickness.

Figure 8: Dimensions for JK-B2A8S30P

5. Setup and Installation

Careful wiring is crucial for the proper functioning and safety of your BMS. Always ensure all connections are secure and correctly oriented.

General Installation Steps:

  1. Connect all balance cables to the battery cells first, ensuring correct polarity and sequence.
  2. Insert the balance cable into the BMS.
  3. Connect the B- line (main negative) and the P- line (load/charge negative) to the battery.

Wiring Diagrams:

Below are example wiring diagrams for common battery string configurations. Always refer to the specific diagram for your BMS model and battery setup.

Wiring diagram for a 4-string battery cell setup with JIKONG BMS, showing connections for total positive electrode P+, total negative electrode, equal load of motor, inverter, and charger.

Figure 9: Wiring Method for 4-String Cells

Wiring diagram for an 8-string battery cell setup with JIKONG BMS, showing connections for total positive electrode P+, total negative electrode, equal load of motor, inverter, and charger.

Figure 10: Wiring Method for 8-String Cells

6. Operation

The JIKONG Smart BMS offers intelligent interaction and easy operation through its dedicated mobile application and PC software.

Mobile App and PC Software:

  • Download the JIKONG BMS APP from the official website (www.jk-bms.com) or your device's app store. The app supports iOS, Android, and HarmonyOS systems.
  • Connect to the BMS via Bluetooth. The app supports multiple languages and can switch automatically with your phone's system.
  • The mobile app and PC software provide a multi-interface display, showing real-time data such as voltage, current, temperature, State of Charge (SOC), and cycle count.
  • You can freely adjust multiple protection values, including overcharge, over-discharge, overcurrent, and temperature settings.
Multi-screen display and data connection options for JIKONG BMS, showing mobile app, PC software, and dedicated home storage display interfaces.

Figure 11: Multi-screen Display and Data Connection

Intelligent interaction and easy operation of JIKONG BMS, showing the app interface for monitoring and adjusting parameters.

Figure 12: Intelligent Interaction via App

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your JIKONG BMS and battery pack.

  • Regular Monitoring: Periodically check the BMS data via the app or PC software to ensure all parameters are within normal operating ranges.
  • Firmware Updates: Check the official JIKONG website (www.jk-bms.com) for any available firmware updates for your BMS model. Follow update instructions carefully.
  • Cleanliness: Keep the BMS clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
  • Connection Checks: Occasionally inspect all wiring connections for tightness and corrosion. Loose connections can lead to poor performance or safety hazards.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges. Avoid prolonged exposure to direct sunlight or extreme cold.

8. Troubleshooting

This section addresses common issues you might encounter with your JIKONG Smart BMS.

Common Issues and Solutions:

  • BMS Not Powering On:
    - Check all main power connections (B- and P-) to ensure they are securely connected to the battery.
    - Verify that the balance wires are correctly connected to each cell and to the BMS.
  • Bluetooth Connection Issues:
    - Ensure Bluetooth is enabled on your mobile device.
    - Make sure the BMS is powered on.
    - Try restarting the mobile app or your device.
    - If prompted for a password, the default password is usually '123456' or '888888'. If this doesn't work, refer to the specific model's documentation or contact support.
  • Cell Imbalance:
    - The active balancing feature should manage cell voltage differences. If significant imbalance persists, check the balance wire connections for any loose or incorrect wiring.
    - Monitor the balancing current via the app to ensure it is active.
  • Overcharge/Over-discharge Protection Triggered:
    - Check your charger/load settings to ensure they are within the battery's safe operating voltage range.
    - Verify the protection parameters set in the BMS app. Adjust if necessary, but always stay within safe limits for your battery chemistry.
  • Short Circuit Protection Triggered:
    - Immediately disconnect the load and inspect all wiring for any short circuits.
  • Temperature Protection Triggered:
    - Ensure the NTC temperature sensor is correctly installed and making good contact with the battery.
    - Check for adequate ventilation around the battery pack and BMS. Reduce load if overheating persists.

9. User Tips

  • Understanding Active Balancing: Active balancing continuously transfers energy from cells with higher energy to those with lower energy, achieving voltage balance with minimal energy loss. This process operates regardless of charging, discharging, or idle states, making it highly effective for maintaining battery health, especially in larger capacity battery packs.
  • Series Connection of Batteries with BMS: It is generally possible to connect two 12V battery packs, each equipped with a JIKONG BMS, in series to create a 24V system. However, ensure that both BMS units are rated for the combined voltage and current of the series configuration. Always consult the specific wiring diagrams and specifications for series connections to avoid damaging the batteries or BMS units.
  • Compatibility with 18650 Cells: Yes, JIKONG BMS units are compatible with 18650 cells, as these are a type of Li-Ion battery. Ensure the BMS model selected matches the series count (e.g., 4S, 8S) and current requirements of your 18650 battery pack.
  • Included Components: The JIKONG BMS typically includes a switch key, sampling cable, and NTC temperature sensor in the package, as indicated in the packing list.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact JIKONG Official Store directly. Keep your purchase records and product serial number handy when contacting support.

JIKONG Technology Co., Ltd. is committed to providing high-quality products and customer satisfaction. For the latest information, FAQs, and support resources, please visit the official JIKONG website: www.jk-bms.com.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.