FMS FCX24M Land Rover Series RC Car User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and care of your FMS FCX24M 1/24 Land Rover Series RC Car. Please read this manual thoroughly before operating the vehicle to ensure proper usage and to maximize your enjoyment.

The FMS FCX24M series features highly detailed 1:24 scale remote control cars, ready-to-run (RTR) out of the box, designed for off-road crawling and adventurous play.

2. Safety Guidelines

• WARNING: Not suitable for children under 36 months. Contains small parts which may present a choking hazard.
• Always operate the RC car in open areas, away from people, pets, and obstacles.
• Do not operate near water or in wet conditions to prevent damage to electronics.
• Ensure batteries are correctly installed and charged according to instructions.
• Never leave charging batteries unattended.
• Turn off the RC car and remote controller when not in use.
• Keep fingers, hair, and loose clothing away from moving parts.

3. Package Contents

Your FMS FCX24M RC Car package includes the following items:

• 1x FMS FCX24M Land Rover Series RC Car (RTR version)
• 1x Remote Controller
• 1x Rechargeable Lithium Battery for the RC Car
• 1x Charger for the RC Car Battery
• 1x Operating Instructions Manual (this document)
• Original Box

4. Specifications

Available Models:

• SKU: FMS12481RTRYL - 1:24 RANGE ROVER FIRST-GENERATION RTR YELLOW

  

• SKU: FMS12482RTRYL - 1:24 LAND ROVER DEFENDER 110 RTR YELLOW

  

• SKU: FMS12483RTRYL - 1:24 LAND ROVER DISCOVERY FIRST-GENERATION RTR YELLOW

  

• SKU: FMS12491RTRYL - 1:24 LAND ROVER DEFENDER 90 RTR YELLOW

  

5. Initial Setup

5.1 Charging the Vehicle Battery

1. Locate the rechargeable Lithium Battery and the charger included in your package.
2. Connect the battery to the charger.
3. Plug the charger into a suitable power source.
4. Allow the battery to charge fully. Refer to the charger's indicator lights for charging status (e.g., red for charging, green for fully charged).
5. Once charged, disconnect the battery from the charger.

5.2 Installing Batteries in the Remote Controller

The remote controller typically requires AA batteries (not always included, check package for details). Refer to the remote controller's manual for specific battery type and installation.

1. Open the battery compartment on the back of the remote controller.
2. Insert the required batteries, ensuring correct polarity (+/-).
3. Close the battery compartment securely.

5.3 Installing the Vehicle Battery

1. Locate the battery compartment on your RC car. This is usually on the underside or accessible by removing the body shell.
2. Carefully insert the charged Lithium Battery into the compartment.
3. Connect the battery connector to the vehicle's power connector, ensuring correct orientation.
4. Secure the battery compartment cover.

5.4 Pairing the Remote Controller

Your FMS FCX24M RC car is an RTR (Ready-to-Run) version, meaning the remote controller and vehicle are typically pre-bound from the factory. If re-pairing is necessary, consult the specific remote controller manual for detailed instructions. Generally, the process involves:

1. Turn on the remote controller.
2. Turn on the RC car.
3. The remote and car should automatically connect. If not, look for a 'bind' button on both the receiver (in the car) and the remote, and follow the binding procedure outlined in the remote's manual.

6. Operation

6.1 Basic Controls

Familiarize yourself with the remote controller's layout:

• Throttle Trigger: Pull to move forward, push to brake/reverse.
• Steering Wheel: Turn left or right to steer the vehicle.
• Trim Dials: Adjust steering and throttle trim to ensure the car drives straight and stops when the trigger is neutral.
• Power Switch: Turns the remote controller on/off.

6.2 Driving Tips

• Start slowly in an open area to get a feel for the controls.
• Practice steering and throttle control to navigate obstacles.
• The FCX24M is designed for off-road crawling; experiment with different terrains and inclines.
• Avoid prolonged full-throttle operation, especially on rough terrain, to prevent overheating.
• Monitor battery life and return the vehicle before the battery is completely depleted to avoid sudden power loss.

7. Maintenance

7.1 Cleaning

• After each use, especially in dusty or dirty conditions, clean the vehicle.
• Use a soft brush or compressed air to remove dirt and debris from the chassis, wheels, and suspension components.
• Wipe the body with a soft, damp cloth. Avoid harsh chemicals.

7.2 Battery Care and Storage

• Always disconnect the battery from the vehicle when not in use.
• Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
• For long-term storage, charge Lithium batteries to a storage voltage (typically around 3.8V per cell) rather than fully charged or fully discharged.
• Never puncture or damage batteries. Dispose of damaged batteries properly.

7.3 General Inspection

• Regularly check all screws and fasteners for tightness.
• Inspect tires for wear and tear.
• Ensure all moving parts (suspension, steering linkages) move freely and are not obstructed.

8. Troubleshooting

9. User Tips

• For optimal performance, ensure all moving parts are free of dirt and debris before and after each use.
• Experiment with different driving styles and terrains to discover the full capabilities of your FCX24M.
• Always keep spare batteries charged for extended play sessions.

10. Warranty and Support

FMS products are manufactured to high-quality standards. For any issues or support inquiries, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.

Please note that this product is intended for recreational use and is not covered by warranty for damage caused by misuse, accidents, or unauthorized modifications.