Eachine EV100

Contents

Eachine EV100 FPV Goggles User Manual

Model: EV100

1. Introduction

The Eachine EV100 FPV Goggles are designed to provide an immersive First Person View experience for RC drone enthusiasts. Featuring a 720*540 resolution display, 5.8G 72-channel receiver, and dual antennas, these goggles offer stable video reception and a comfortable viewing experience. This manual provides detailed instructions for setting up, operating, and maintaining your EV100 FPV Goggles.

Eachine EV100 FPV Goggles with antennas and battery case
Figure 1: Eachine EV100 FPV Goggles with included accessories.

2. Safety Warnings

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Always ensure proper ventilation when charging batteries.
  • Do not expose the goggles to extreme temperatures or direct sunlight for extended periods.
  • Keep the device away from water and moisture.
  • Do not attempt to disassemble or modify the goggles, as this may void the warranty and cause damage.

3. Package Contents

Please check the package contents carefully upon receipt. If any items are missing or damaged, contact your retailer.

  • 1 x Eachine EV100 5.8G 72CH FPV Goggles
  • 1 x 18650 Battery Case (Note: Battery will be changed to an 18650 battery case to facilitate transport. Batteries are not included.)
  • 2 x RP-SMA 3dBi Antenna
  • 1 x USB Data/Charger Cable
  • 1 x User Manual
Diagram of Eachine EV100 package contents
Figure 2: Included items in the Eachine EV100 package.

4. Specifications

CategoryParameterValue
GeneralBrand NameEachine
Model NumberEV100
Size165mm*76mm*30mm
Weight221g (with battery 57g and antenna 13g)
MaterialPlastic (ABS)
DisplayResolution720*540
FOV (Field of View)28° diagonal
IPD (Interpupillary Distance)58-68mm
Ratio4:3
ReceiverFrequency5.8G 5333Mhz-5945Mhz (72 Channels)
Sensitivity<=-93dB
Antenna Impedance50Ω
Antenna Gain3dBi
Antenna ConnectorRP-SMA
Video FormatNTSC/PAL
Working Temperature-10℃ to +40℃
PowerPower Input7.4V
Low Voltage Alert6.8V
Battery18650 battery case (batteries not included)
ChargingUSB Cable (not included)
Eachine EV100 FPV Goggles specifications table and frequency chart
Figure 3: Detailed specifications and frequency table for the EV100 goggles.
Eachine EV100 FPV Goggles dimensions
Figure 4: Dimensions of the Eachine EV100 FPV Goggles (165mm x 76mm x 30mm).

5. Key Features

  • AV Input and Output: Supports external video sources and output to other displays. Note: The built-in receiver does not support audio in FPV mode; audio is available only in AV-IN mode.
  • External DVR Module Support: Allows connection of an external DVR for recording footage.
  • Dual Antennas: Enhances reception and provides stable video performance.
  • Integrated Fan: Helps defog the lenses for a clear visual experience.
  • Adjustable Focal Length: Accommodates users with up to 400-degree myopia and 150-degree hyperopia, allowing direct viewing without corrective lenses.
  • Adjustable IPD (Interpupillary Distance): Range of 58~68mm for personalized comfort.
  • Auto Search Function: Automatically scans all frequencies and selects the channel with the strongest signal.
  • Multiple Racing Modes: Includes 4, 6, and 8 pilot modes with 60-80MHz intervals between adjacent channels to minimize interference.
  • Debug Mode: Requires a compatible VTX (Video Transmitter) that supports pit mode and an extra frequency of 5300MHz.
Summary of Eachine EV100 FPV Goggles features
Figure 5: Overview of EV100 FPV Goggles features.

6. Setup Guide

  1. Attach Antennas: Screw the two RP-SMA 3dBi antennas onto the connectors on top of the goggles.
  2. Prepare Battery: Insert appropriate 18650 batteries (not included) into the provided 18650 battery case. Ensure correct polarity.
  3. Connect Power: Connect the battery case cable to the power input port on the goggles.
  4. Power On: Press and hold the power button on the goggles until the display turns on.
  5. Adjust IPD: Use the IPD adjustment sliders (usually located on the bottom or sides of the goggles) to align the screens with your eyes for a clear, single image.
  6. Adjust Focal Length: If you have myopia or hyperopia, use the focal length adjustment knobs (if present, or as per instructions in the manual) to achieve a sharp image without glasses. The goggles support up to 400 degrees of myopia and 150 degrees of hyperopia.
Top view of Eachine EV100 FPV Goggles showing dual antennas
Figure 6: Goggles with dual antennas attached.
Diagram showing IPD and focal length adjustment on Eachine EV100 FPV Goggles
Figure 7: IPD (58-68mm) and focal length adjustment points.

7. Operation

7.1. Powering On/Off

Press and hold the power button to turn the goggles on or off.

To find the best signal, press and hold the mode button for 6 seconds. The goggles will automatically search all available frequencies and select the channel with the strongest signal.

7.3. OSD Display

The On-Screen Display (OSD) provides real-time information. In regular mode, it shows details like "Band-A CH1 5865MHz". In racing mode, it displays "RACER-X-Y" where X is the race number and Y is the channel.

OSD display examples for Eachine EV100 FPV Goggles
Figure 8: Examples of OSD information in regular and racing modes.

7.4. Racing Modes

The goggles support 3 racing modes for 4, 6, or 8 pilots. These modes utilize 60-80MHz intervals between adjacent channels to significantly reduce interference during multi-pilot races.

7.5. Debug Mode

Debug Mode is available for advanced users and requires a compatible Video Transmitter (VTX) that supports pit mode and an additional frequency of 5300MHz.

7.6. AV Input/Output

The EV100 goggles support AV IN/OUT functionality. You can connect external video sources such as a digital video camera (DV), PC, or TV to the goggles. Similarly, the goggles' video feed can be output to an external display.

Diagram showing AV IN/OUT connectivity for Eachine EV100 FPV Goggles
Figure 9: AV IN/OUT connections to various devices.

Note: While the goggles support audio input in AV-IN mode, the built-in FPV receiver does not process audio. For FPV audio, an external DVR module with audio capabilities would be required.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the goggles. For lenses, use a specialized lens cleaning cloth and solution to avoid scratches.
  • Fan Operation: The integrated fan helps prevent fogging. Ensure the fan vents are clear of obstructions for optimal performance.
  • Sponge Replacement: The face foam (sponge) is detachable and easy to change, allowing for cleaning or replacement to maintain hygiene and comfort.
  • Storage: Store the goggles in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
Diagram showing detachable patch and sponge on Eachine EV100 FPV Goggles
Figure 10: Detachable patch and easy-to-change sponge for maintenance.

9. Troubleshooting

ProblemPossible CauseSolution
No image or poor signalIncorrect channel, weak signal, antenna issueUse the Auto Search function. Ensure antennas are securely attached and pointed correctly. Check VTX power and channel.
Goggles not powering onLow battery, incorrect battery installation, faulty cableCheck battery charge and polarity in the 18650 case. Ensure power cable is securely connected.
Low battery alert (6.8V)Battery voltage is lowReplace or recharge the 18650 batteries immediately. The goggles will power off if voltage drops further.
Blurred imageIncorrect IPD or focal length adjustmentAdjust IPD and focal length sliders/knobs until the image is clear.
No audio in FPV modeBuilt-in receiver limitationThis is normal. The built-in FPV receiver does not support audio. Audio is only available when using AV-IN mode with an external source that provides audio.
Low battery alert diagram for Eachine EV100 FPV Goggles
Figure 11: Visual representation of the low battery alert at 6.8V.

10. User Tips

  • Battery Choice: Since the goggles use an 18650 battery case, consider using high-quality, matched 18650 cells for optimal performance and runtime.
  • External Power: For extended use, an external power bank can be connected via the USB interface for an alternative power supply.
  • Compatibility: The goggles are compatible with any FPV drone or system that transmits video on the 5.8G frequency band (5333Mhz-5945Mhz) and uses NTSC/PAL video format. For specific drone models like Mavic Pro 1 or SJRC11S4K, ensure they have a compatible 5.8G video transmitter.
  • TV Mirroring: Yes, it is possible to connect the goggles to a TV for mirroring using the AV OUT function, provided your TV has an AV input.
  • Firmware Upgrading: The goggles support firmware upgrading via the USB interface. Refer to the Eachine website or support resources for the latest firmware and instructions.
Eachine EV100 FPV Goggles battery case and USB port for firmware upgrading
Figure 12: 18650 battery case and USB port for charging and firmware upgrades.

11. Warranty and Support

Eachine products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official Eachine website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.