1. Introduction
Thank you for choosing the Z-920 LCD Display Dashboard. This accessory is designed to provide essential information and control for your KUGOO M5 Pro Electric Scooter. This manual provides detailed instructions for the safe installation, proper operation, and basic maintenance of your new display unit. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
2. Safety Information
Always observe the following safety precautions:
- Ensure the electric scooter is powered off and disconnected from any power source before attempting installation or maintenance.
- If you are unsure about any installation steps, seek assistance from a qualified technician. Improper installation can lead to damage to the display, scooter, or personal injury.
- Do not attempt to open or modify the display unit. This will void any potential warranty and may cause damage.
- Keep the display unit dry and away from extreme temperatures.
3. Package Contents
Verify that all items are present in your package:
- 1x Z-920 LCD Display Dashboard with integrated throttle grip (48V)
Figure 3.1: Z-920 LCD Display Dashboard and Throttle Grip
4. Specifications
| Feature | Specification |
|---|---|
| Model | Z-920 |
| Nominal Voltage | 48V |
| Display Type | LCD |
| Connector Type | 6-pin |
| Functions Displayed | Speed (km/h), Battery Level, Mode Indication (typical) |
| Color | Black |
5. Setup Instructions
5.1 Pre-Installation Check
- Ensure your electric scooter is completely powered off and the battery is disconnected.
- Confirm that your scooter's wiring harness is compatible with a 6-pin connector.
- Gather necessary tools (e.g., screwdrivers, wire cutters/strippers if modification is needed).
5.2 Installation
- Carefully remove your existing throttle and display unit from the handlebar. Note the wiring connections before disconnecting.
- Connect the 6-pin cable from the Z-920 LCD Display Dashboard to the corresponding wiring harness on your scooter. Ensure the connection is secure.
- Mount the Z-920 unit securely onto the handlebar in a comfortable and accessible position. Tighten any screws or clamps as necessary.
- Once installed, double-check all connections before reconnecting the battery and powering on the scooter.
Important Note:
The Z-920 LCD Display Dashboard features a 6-pin connector. If your electric scooter's existing system uses a 5-pin connector, wiring modifications will be necessary for proper installation. It is highly recommended to seek professional assistance for such modifications to avoid damage to the scooter or the display unit.
Figure 5.1: Z-920 Display Unit with 6-pin Cable
Figure 5.2: Underside view showing the cable entry point
6. Operating Instructions
6.1 Power On/Off
After successful installation, turn on the main power switch of your electric scooter. The Z-920 LCD Display Dashboard should illuminate, indicating it is active.
6.2 Display Readings
The LCD screen provides real-time information:
- Speed: Displays current speed in kilometers per hour (km/h).
- Battery Level: Shows the remaining battery charge.
- Mode Indication: May display current riding mode (e.g., ECO, Normal, Sport) or other status indicators.
- Odometer/Trip Meter: Typically, these displays can cycle between total distance (ODO) and trip distance (TRIP).
Figure 6.1: Close-up of the Z-920 Display Screen
6.3 Throttle Operation
Gently twist the integrated throttle grip to control the acceleration of your electric scooter. Release the throttle to decelerate.
6.4 Button Functions
The Z-920 display unit features a red button, typically used for navigation and settings:
- Short Press: Briefly press the button to cycle through different display modes (e.g., Odometer, Trip Distance).
- Long Press: Press and hold the button to access settings menus (e.g., changing speed units, adjusting speed limits, or other advanced parameters). Refer to the scooter's main manual or the PDF manual for specific button functionalities.
Figure 6.2: Z-920 Display Unit with Red Control Button
7. Maintenance
- Cleaning: Wipe the display screen with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the screen or casing.
- Protection: Keep the display unit dry. Avoid exposing it to heavy rain or prolonged moisture.
- Connections: Periodically check the cable connections to ensure they are secure and free from corrosion or damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display not turning on | Scooter power off, loose connection, faulty unit | Ensure scooter is powered on. Check all cable connections. If problem persists, consult a technician. |
| Incorrect speed/battery readings | Improper installation, calibration issue | Verify installation. Check scooter's main manual for calibration procedures if available. |
| Throttle not responding | Loose throttle connection, faulty throttle | Check throttle cable connection. Ensure no physical obstruction. |
9. User Tips
- If you are replacing an older display unit with a different pin configuration (e.g., 5-pin), be prepared for wiring modifications. Professional assistance is highly recommended for such adjustments to ensure correct functionality and safety.
- The Z-920 unit is noted for its high-quality materials and workmanship, suggesting good durability when properly installed and maintained.
- Always ensure your scooter's voltage system matches the 48V requirement of this display for proper operation.
10. Frequently Asked Questions (FAQ)
- Q: Is this display compatible with 5-pin connectors?
- A: The Z-920 LCD Display Dashboard is designed with a 6-pin connector. If your scooter uses a 5-pin connector, wiring modifications will be necessary for installation. It is advisable to consult a professional for this.
- Q: Does the display show speed in km/h?
- A: Yes, the display shows the current speed, typically in kilometers per hour (km/h).
11. Warranty & Support
For specific warranty information, return policies, or technical support, please refer to the terms and conditions provided by your retailer or contact the point of purchase directly.
A detailed user manual in PDF format, which may contain additional information and diagrams, is available for reference: