1. Introduction
The Vgate iCar Pro 2S is a Bluetooth-enabled diagnostic scan tool designed to transform your iPhone, Android device, or Windows PC into a professional-grade vehicle diagnostic system. This OBD-II adapter provides access to all legal OBD-II protocols, allowing for comprehensive vehicle diagnostics.
By connecting the iCar Pro 2S to your vehicle's diagnostic port, you can install client software and diagnostic applications to identify and resolve car faults. Its capabilities include reading non-specific and manufacturer-specific fault codes, monitoring real-time ECU sensor data (such as engine speed, fuel system status, fuel pressure, and oxygen sensor voltage), and much more.
Image: Vgate iCar Pro 2S device with blue light, indicating support for Hybrid/Pure Electric Vehicles and listing functions like Check Engine, Data logging, Display current sensor data, Real-time connected, Detect/Clear Fault Code, and Vehicle information.
2. Key Features
- Advanced Protection: Features over-voltage, over-temperature, and over-current protection to ensure device longevity and safe operation.
- High-Speed Connectivity: Utilizes a fast Bluetooth OBD-II adapter with a baud rate of 3Mbps for efficient data transfer.
- Software Updates: Supports free firmware updates to keep your device current with the latest protocols and features.
- BatterySaver Technology: Incorporates a low-power mode (3mA in idle state) and operates at 34mA during active use, protecting your car's battery life.
- Automatic Sleep & Wake-up: Automatically enters sleep mode when idle and wakes up wirelessly upon vehicle activity or battery voltage changes.
- Enhanced Filtering: Offers up to 208 groups of pass, block, and flow control filters for precise data management.
- Superior Compatibility: Works seamlessly with a wide range of third-party applications and software, offering broader utility than many other adapters.
- Hybrid/EV Support: Includes an automatic wake-up function specifically designed for Hybrid and Pure Electric Vehicles.
- Full OBD2 Protocol Compatibility: Fully compatible with all OBD2 protocols and commands.
Image: Vgate iCar Pro 2S device with a car in the background, emphasizing compatibility with electric and hybrid vehicle auto wake-ups and BatterySaver technology.
3. Package Contents
Upon opening your Vgate iCar Pro 2S package, you should find the following items:
- 1 x Vgate iCar Pro 2S Diagnostic Scanner Tool
- 1 x Start Guide (English)
Image: The Vgate iCar Pro 2S device, its English Start Guide, and the product box.
4. Specifications
| Attribute | Specification |
|---|---|
| Model | I CAR PRO 2S |
| Brand | Vgate |
| Item Type | Code Readers & Scan Tools |
| Connectivity | Bluetooth 5.2 |
| Hardware Version | I CAR PRO 2S |
| Software Version | Supports Hybrid / Pure Electric Vehicle |
| Software Update | Yes (Free firmware updates) |
| Maximum Communication Rate | 3.0 Mbps |
| Average Communication Rate (FPS) | 43.5 ~ 76.6 |
| Maximum Bytes of One Reading | 4095 |
| Auto Sleep Mode | Yes |
| Wake-up Triggers | OBD bus activity, Battery Voltage, Remotely (all vehicles) |
| Flow Control Filters | Up to 208 groups (Pass, Block, EV) |
| Compatible Systems | Android, iOS, Windows |
| ELM327 Instruction Compatibility | V2.3 |
| Recommended Apps | Car Scanner, OBD Auto Doctor, OBD JScan, OBD Fusion, etc. |
| Certifications | CE, FCC, RoHS |
| Dimensions (L x W x H) | Approximately 4.1 cm x 4 cm x 2 cm |
| Weight | 0.09 kg |
Image: Comparison table detailing the product configurations and performance metrics of iCar Pro 2S versus iCar Pro.
Image: The compact size and ease of use/carry of the Vgate iCar Pro 2S device, with approximate dimensions shown.
5. Setup and Installation
The Vgate iCar Pro 2S features an easy plug-and-play installation design, typically completed in just one second.
- Locate the OBD-II Port: The OBD-II diagnostic port is usually located under the steering wheel on most vehicle models. Refer to your vehicle's owner's manual if you have difficulty finding it.
- Plug in the Device: Firmly insert the Vgate iCar Pro 2S into your vehicle's OBD-II port. The device should power on, indicated by an LED light.
- Download a Compatible App: On your smartphone (iOS/Android) or Windows PC, download a compatible OBD-II diagnostic application. Recommended apps include Car Scanner, OBD Auto Doctor, OBD JScan, and OBD Fusion.
- Pair via Bluetooth:
- For iOS: Go to your device's Bluetooth settings, find 'Vgate' or 'iCar Pro 2S' and pair.
- For Android/Windows: Go to your device's Bluetooth settings, find 'Vgate' or 'iCar Pro 2S' and pair. You may be prompted for a PIN (usually '1234' or '0000').
- Connect via App: Open your chosen diagnostic app and follow its instructions to connect to the Vgate iCar Pro 2S device.
Image: Diagram illustrating the easy installation of the OBD interface, showing the device plugging into the OBD port, typically found under the steering wheel.
Image: The Vgate iCar Pro 2S device shown plugged into a car's OBD port, ready for use.
6. Operating Instructions
Once the Vgate iCar Pro 2S is connected and paired with your device and diagnostic app, you can begin to utilize its various functions:
- Check Engine Light: Read and understand the status of your vehicle's check engine light.
- Data Logging: Record and store vehicle data over time for later analysis.
- Display Current Sensor Data: View real-time data from various ECU sensors, including engine RPM, coolant temperature, fuel system status, vehicle speed, fuel pressure, oxygen sensor voltages, and more.
- Real-time Connection: Maintain a continuous, real-time connection to your vehicle's data stream.
- Detect/Clear Fault Codes: Identify both generic and manufacturer-specific diagnostic trouble codes (DTCs) and clear them after repairs.
- Vehicle Information: Access general vehicle information such as VIN (Vehicle Identification Number) and calibration IDs.
Specific operations will vary depending on the diagnostic application you choose. Always refer to the app's instructions for detailed guidance on using its features.
Image: A visual summary of the Vgate iCar Pro 2S functions, including Check Engine, Data logging, Display current sensor data, Real-time connected, Detect/Clear Fault Code, and Vehicle information.
7. Troubleshooting
- Device Not Powering On: Ensure the iCar Pro 2S is fully inserted into the OBD-II port. Check your vehicle's fuse box for any blown fuses related to the OBD-II port.
- Bluetooth Pairing Issues:
- Make sure your device's Bluetooth is enabled and discoverable.
- Forget the device from your Bluetooth settings and try pairing again.
- Ensure no other Bluetooth devices are interfering.
- Try restarting both your mobile device/PC and the vehicle (turn ignition off and on).
- Confirm the correct PIN (if prompted, usually '1234' or '0000').
- App Not Connecting to Device:
- Verify that the iCar Pro 2S is successfully paired via Bluetooth in your device's system settings.
- Check the app's settings to ensure it is configured to connect to the correct Bluetooth device.
- Update the diagnostic app to its latest version.
- Try a different compatible diagnostic app to rule out app-specific issues.
- Unable to Read Data or Clear Codes:
- Ensure your vehicle's ignition is in the 'ON' position (engine can be off or running, depending on the desired data).
- Confirm your vehicle is OBD-II compliant (most vehicles manufactured after 1996 in the US, 2001 in EU for petrol, 2004 for diesel).
- Some fault codes may be 'hard codes' that cannot be cleared until the underlying issue is resolved.
- Ensure the app has the necessary permissions to access Bluetooth and vehicle data.
8. User Tips
- Hybrid/EV Compatibility: The Vgate iCar Pro 2S is confirmed to support diagnostic and fault clearing for hybrid vehicles, including newer models like the Toyota Fielder 2022, thanks to its specialized auto wake-up function for electric vehicles.
- App-Specific Connections: When using third-party apps like LeafSpy, be aware that some applications may require specific connection procedures or credentials (e.g., user and password) within the app itself. Always consult the app's documentation for detailed connection instructions.
- Firmware Updates: Regularly check for and install free firmware updates for your iCar Pro 2S to ensure optimal performance and compatibility with the latest vehicle protocols and diagnostic features.
- Battery Saver: Take advantage of the device's BatterySaver technology. The low power consumption in idle mode helps protect your car's battery, so you can leave the device plugged in without significant drain.
9. Warranty and Support
The Vgate iCar Pro 2S comes with free firmware updates, ensuring your device remains up-to-date. For specific warranty details, return policies, or technical support, please contact the seller directly. You can reach the Win-Win Diagnostic Tool Store via:
- Skype: obd2scannertool
- E-mail: obd2scannertool@outlook.com
Please retain your purchase receipt for any warranty claims or support inquiries.
