Introduction
The PaiPaitek PD 519V-1 No Shock Dog Training Collar is designed to provide a gentle, humane, and effective way to train your dog. This system utilizes powerful vibrations and audible beeps, avoiding any electric shocks or painful prongs. With a remote range of up to 3300 feet, waterproof design, and long-lasting rechargeable batteries, it offers a versatile solution for addressing common behavioral issues such as excessive barking, jumping, digging, and leash pulling.
Emphasizing humane training with no shock and no prongs.
Safety Information
- This training collar is designed for humane training and does not use electric shock or prongs.
- Ensure the collar is fitted correctly to prevent skin irritation. It should be snug enough to stay in place but not too tight to restrict breathing or cause discomfort.
- Do not leave the collar on your dog for more than 12 hours a day to prevent pressure sores.
- Always supervise your dog during initial training sessions.
- This device is intended for dogs weighing between 5 lbs and 120 lbs, with neck sizes from 8 to 27 inches.
Package Contents
Please check the package for the following items:
- Remote Transmitter
- Receiver Collar
- Adjustable Nylon Strap
- Dual Charging Cable
- Wrist Band
- User Manual (this document)
The PaiPaitek dog training collar and remote control.
Product Overview
Remote Transmitter
- LCD Large Display: Shows current settings, battery level, and channel.
- Power Button/Keylock: Turns the remote on/off and locks/unlocks buttons.
- Signal Channel Button (CH): Selects the dog channel (1, 2, or 3).
- Tone Button: Activates the audible beep.
- Tone and Vibration Button: Activates both beep and vibration simultaneously.
- Vibration Button: Activates vibration only.
- +/- Buttons: Adjusts vibration intensity levels (1-9).
- Charging Port: For recharging the remote.
Receiver Collar
- Power Button: Turns the receiver on/off.
- Indicator Light: Shows operational status and battery level.
- Charging Port: For recharging the receiver.
Detailed view of the remote and receiver with labeled components.
Setup
1. Charging the Devices
Before first use, fully charge both the remote transmitter and the receiver collar. Use the provided dual charging cable to charge both units simultaneously.
- Connect the dual charging cable to a standard USB power adapter (not included).
- Plug one end into the remote's charging port and the other into the receiver's charging port.
- The indicator lights will show charging status (e.g., solid light while charging, off when fully charged).
- A full charge provides approximately 20 days of working time.
Illustration of the dual charging process for the remote and receiver.
2. Pairing the Remote and Receiver
The devices are usually pre-paired from the factory. If re-pairing is needed or you are adding additional receiver collars (up to 3), follow these general steps:
- Turn on the remote transmitter.
- Press the 'CH' button on the remote to select the desired channel (1, 2, or 3).
- Turn on the receiver collar.
- Press and hold the power button on the receiver collar until the indicator light flashes rapidly, indicating pairing mode.
- Within a few seconds, press any training button (Tone or Vibration) on the remote.
- If successful, the receiver's indicator light will stop flashing and remain solid, or flash slowly.
3. Fitting the Collar
Proper fit is crucial for comfort and effectiveness. The collar is adjustable to fit dogs with neck sizes from 8 to 27 inches, suitable for breeds weighing 5 lbs to 120 lbs.
- Place the receiver collar around your dog's neck.
- Ensure the receiver unit is positioned centrally on the underside of your dog's neck.
- Adjust the strap so it is snug but not tight. You should be able to fit two fingers comfortably between the collar and your dog's neck.
- Trim any excess strap length if necessary.
Guide for adjusting the collar to fit different dog sizes.
Operating Instructions
1. Turning On/Off
- Remote: Press and hold the Power button until the LCD screen lights up/turns off.
- Receiver: Press and hold the Power button until the indicator light turns on/off.
2. Selecting a Channel (for multiple dogs)
If you are training multiple dogs (up to 3), use the 'CH' button on the remote to switch between channels 1, 2, and 3. Each channel corresponds to a paired receiver collar.
The remote supports training up to 3 dogs simultaneously using separate channels.
3. Training Modes
The collar offers three humane training modes:
- Tone (Beep): Press the 'Tone' button to emit an audible beep. There are 9 different beep types.
- Vibration: Press the 'Vibration' button to activate vibration. The intensity can be adjusted from 1 to 9 levels.
- Tone + Vibration: Press the 'Tone and Vibration' button to activate both simultaneously. The vibration intensity can be adjusted from 1 to 9 levels.
Visual representation of the Sound, Vibration, and combined Sound + Vibration modes.
4. Adjusting Vibration Intensity
Use the '+/-' buttons on the side of the remote to increase or decrease the vibration intensity from level 1 (lowest) to level 9 (highest). Start with the lowest effective level and increase only if necessary.
The remote allows for adjustable sound and vibration levels.
5. Safety Keypad Lock
The remote features a safety lock to prevent accidental activation. Slide the 'ON/OFF' switch to the 'Lock' position to disable the training buttons. Slide it to 'Unlock' to enable them.
The safety lock prevents unintended commands.
6. Remote Range
The remote offers an ultra-wide range of up to 3300 feet, allowing for effective training outdoors and in large spaces.
The 3300ft range allows for training in open outdoor areas.
Maintenance
Cleaning
- Wipe the remote and receiver with a soft, damp cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure charging ports are free of debris.
Waterproofing
The receiver collar features IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. It does not need to be removed if your dog goes swimming or plays in the rain.
The collar is 100% waterproof, suitable for dogs in water.
Battery Care
- Recharge the devices when the battery indicator shows low power.
- Avoid fully depleting the battery regularly to prolong its lifespan.
- Store the devices in a cool, dry place when not in use.
Troubleshooting
- Device not turning on: Ensure both the remote and receiver are fully charged.
- No response from receiver: Check if the remote and receiver are paired correctly and on the same channel. Ensure the remote's keypad lock is disengaged.
- Collar not effective: Adjust the collar fit to ensure good contact. Increase the vibration intensity level gradually. Ensure your dog is within the 3300ft remote range.
- Short battery life: Ensure devices are fully charged. Battery life can vary based on usage frequency and intensity settings.
Specifications
| Feature | Specification |
|---|---|
| Model Number | PD 519V-1 |
| Brand Name | PaiPaitek |
| Item Type | Training Collars |
| Material | Plastic |
| Type | Dogs |
| Functions | Beep/Vibration/Beep +Vibration |
| Intensity Levels | 1-9 Levels (Vibration) |
| Waterproof Level | IPX7 Upgrade |
| Remote Range | 3300ft |
| Working Time | Up to 20 Days |
| Channels | 3 Channels |
| Battery Type | Rechargeable Li-ion battery |
| Collar Fit | 8-27 inch neck, 5-120 lbs dogs |
User Tips
- Consistency is Key: Use the collar consistently with commands to help your dog associate the stimulus with the desired behavior.
- Positive Reinforcement: Always pair the collar's cues with positive reinforcement (treats, praise) when your dog responds correctly.
- Start Low: Begin with the lowest vibration intensity level and only increase if your dog does not respond. The goal is to get their attention, not to punish.
- Short Sessions: Keep training sessions short and positive to maintain your dog's engagement.
- Observe Your Dog: Pay close attention to your dog's reactions to determine the most effective settings and timing for cues.
Warranty & Support
For any questions, technical support, or warranty claims, please contact the manufacturer or seller directly. Refer to your purchase documentation for specific contact information.
