Introduction
The Eachine TX06 is a compact and lightweight All-In-One (AIO) FPV camera and video transmitter designed for RC drones, particularly suitable for micro and tiny whoop builds. It features a 700TVL camera, a 5.8Ghz 48-channel 25mW video transmitter, and supports Smart Audio for convenient configuration. This manual provides detailed instructions for setting up, operating, and maintaining your TX06 FPV camera system.

Package Contents
Please inspect the package contents carefully. If any items are missing or damaged, contact your retailer.
- 1 x Eachine TX06 700TVL 5.8Ghz 25mW FPV Camera
- 1 x Molex 2P 1.25mm to JST-DS 2.0mm Power Adapter Cable
- 1 x User Manual (this document)

Specifications
| Feature | Specification |
|---|---|
| Frequency | 5.8Ghz |
| Channels | 48CH (40CH mentioned in some specs, but 48CH is supported by frequency table) |
| Transmission Distance | Up to 150 meters (line of sight) |
| Working Current | 280mA |
| Resolution | 700TVL M7 Lens |
| Lens Angle | 130° FOV, 160° DFOV (Diagonal Field of View) |
| Output Power | 25mW |
| Input Voltage | 3.3-5.5V (1S LiPo compatible) |
| Input Current | 40mA @ 3.7V |
| Video Format | NTSC / PAL (selectable) |
| Video Angle | Horizontal: 110° / Vertical: 90° |
| Extra Features | Smart Audio, Pitmode |
| Dimensions (L*W) | 14mm * 13.8mm |
| Net Weight | 2.8g |
| Connectors | Molex 1.25mm 2P & JST-SH 1.0mm 4P |


Setup
Wiring Diagram
The Eachine TX06 is designed for plug-and-play integration. Connect the camera to your flight controller or power source using the provided cables. Ensure correct polarity to prevent damage.
- Red Wire: Positive Power Input (3.3-5.5V)
- Black Wire: Ground
- Yellow Wire: Video Output
- White/Green Wires: Smart Audio (for OSD configuration via FC Uart)


Video Format Selection (NTSC/PAL)
The TX06 supports both NTSC and PAL video formats. The selection is typically done via the flight controller's OSD if Smart Audio is connected, or it may be pre-set. Refer to your flight controller's manual for specific instructions on configuring video format via Smart Audio.
Operating Instructions
Frequency and Channel Switching
The TX06 features a single button for manual frequency and channel selection, indicated by two groups of LEDs (Blue LED 1-6 for bands, Red LED 1-8 for channels).
- Channel Switching: Short press the button to cycle through channels 1-8.
- Band Switching: Press and hold the button for 2 seconds to cycle through bands 1-6.
The TX06 Pro model has memory for settings, meaning it will retain the last selected channel/band after power cycling. If your model does not have this feature, you will need to set it each time.


Frequency Table
The TX06 supports 48 channels across 6 bands. Refer to the table below for specific frequencies:

Smart Audio and Pitmode
The TX06 integrates Smart Audio technology, allowing you to change VTX settings (like channel, band, and Pitmode) directly from your flight controller's OSD (On-Screen Display) via a UART connection. This eliminates the need for physical button presses, offering greater convenience.
Pitmode is a feature that reduces the video transmitter's power output to a very low level (e.g., 0.01mW or less), allowing you to power up your drone without interfering with other pilots' video feeds. This is particularly useful in race environments or when performing maintenance.

Maintenance
- Cleaning: Keep the camera lens clean using a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals.
- Storage: Store the camera in a dry, dust-free environment when not in use.
- Physical Inspection: Regularly check for any loose connections, damaged wires, or physical damage to the camera module or antenna.
- Heat Management: Ensure adequate airflow around the camera during operation, especially in enclosed spaces, to prevent overheating.
Troubleshooting
- No Video Signal:
- Check power connections (Red/Black wires) to ensure correct voltage (3.3-5.5V) and polarity.
- Verify the video output wire (Yellow) is correctly connected to your video receiver or flight controller.
- Ensure your FPV goggles/monitor are set to the correct frequency and band as the TX06.
- Confirm the camera is not in Pitmode if you expect a full power signal.
- Poor Video Quality / Static:
- Check for interference from other electronic components on your drone.
- Ensure the antenna is securely attached and not damaged.
- Try changing to a different channel or band, as local interference can vary.
- Verify the camera lens is clean and free from smudges or debris.
- Smart Audio Not Working:
- Ensure the Smart Audio wires (White/Green) are correctly connected to a UART TX pad on your flight controller.
- Verify that Smart Audio is enabled and configured correctly in your flight controller's firmware (e.g., Betaflight, Kiss).
User Tips
- Antenna Care: The brass dipole antenna is durable but can be bent. Handle with care to maintain optimal signal quality.
- Mounting: Due to its small size and light weight, the TX06 can be mounted in various ways. Ensure it is securely fixed to prevent vibration, which can affect video quality. Avoid mounting directly next to high-current components that might cause electrical interference.
- Power Source: Always use a stable 1S (3.3-5.5V) power source. Over-voltage can permanently damage the unit.
- Testing: Before flying, always perform a range test in a safe environment to ensure your video link is stable.
Warranty and Support
Eachine products are designed for reliability and performance. For technical support, troubleshooting assistance, or warranty inquiries, please contact the retailer where you purchased the product. Keep your proof of purchase for warranty claims.
Compliance Information
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.