1. Introduction
The TEYUN Q12 is a professional 2-channel portable audio interface and mini USB mixer designed for high-quality audio recording and mixing. It is suitable for various applications including guitar recording, studio sessions, and singing. Featuring 16-bit/48kHz audio resolution and switchable 48V phantom power, the Q12 ensures professional-grade sound quality.

Figure 1: TEYUN Q12 Audio Interface
2. Product Features
- 2-Channel Input: Supports microphone and line-level inputs.
- High-Resolution Audio: 16-bit/48kHz audio resolution for clear and professional sound.
- 48V Phantom Power: Switchable phantom power for condenser microphones.
- Hi-Z Input: Dedicated input mode for electric guitars and basses.
- USB Connectivity: Connects to a computer for both audio transmission and power.
- Monitoring: Headphone monitoring interface with dedicated volume control.
- Compact and Portable: Ideal for recording studios and personal setups.
3. Setup Instructions
Before connecting any devices, ensure all volume levels on the Q12 and connected equipment are set to minimum to prevent sudden loud noises.
3.1. Connecting to a Computer
- Connect the TEYUN Q12 to your computer using a USB cable. The USB connection provides power to the device and enables audio communication.
- Your computer should automatically detect the Q12 as an audio device. Install any necessary drivers if prompted by your operating system.
3.2. Connecting Audio Devices
Refer to the connection schematic below for proper wiring.

Figure 2: Connection Schematic
- Microphones: Connect microphones to INPUT 1 or INPUT 2 (MIC/LINE). For condenser microphones, ensure the +48V PHANTOM (CH1-2) switch is turned ON after connecting the microphone.
- Instruments (Guitar/Bass): Connect electric guitars or basses to INPUT 1 or INPUT 2. Turn on the HI-Z switch for instrument input mode after connecting the instrument. Remember to turn off the HI-Z switch before unplugging the instrument.
- Keyboards/Line-level Devices: Connect keyboards or other line-level devices to INPUT 1 or INPUT 2 (MIC/LINE).
- Speakers: Connect your speakers to the MAIN OUTPUTS (1/L and 2/R).
- Headphones: Connect your headphones to the PHONES output for monitoring.
Important Safety Note: Always turn all volume levels to a minimum before connecting or disconnecting any external devices to prevent damage to your equipment or hearing.
4. Operating Instructions
Familiarize yourself with the controls and indicators on the TEYUN Q12 using the product function diagram.

Figure 3: Product Function Diagram
4.1. Controls and Indicators
- INPUT 1 / INPUT 2 (MIC/LINE): Combination XLR/TRS inputs for microphones and line-level instruments.
- +48V PHANTOM (CH1-2) Switch: Activates 48V phantom power for condenser microphones on both channels.
- HI-Z Switch: Engages high-impedance input mode for electric guitars and basses.
- LEVEL 1 / LEVEL 2 Knobs: Adjust the input gain for Channel 1 and Channel 2 respectively.
- ST PAN Switch: Toggles between mono and stereo outputs for channels 1 and 2.
- REC Switch: Activates recording mode.
- OUTPUT Knob: Controls the main output volume to your speakers.
- PHONES Knob: Adjusts the volume for headphone monitoring.
- PEAK Indicators: Light up when the input signal is too high, indicating potential clipping. Adjust the LEVEL knobs to prevent peaking.
- SIG Indicators: Light up when an input signal is detected.
- +48V Indicator: Lights up when phantom power is active.
- POWER Indicator: Lights up when the device is powered on.
4.2. Basic Operation
- Power On: Connect the Q12 to your computer via USB. The POWER indicator will light up.
- Input Level Adjustment: Connect your microphone or instrument. Slowly increase the corresponding LEVEL knob while speaking or playing. Watch the PEAK indicator; if it lights up, reduce the level slightly. The SIG indicator should light consistently.
- Monitoring: Adjust the PHONES knob to set your desired headphone monitoring volume.
- Main Output: Adjust the OUTPUT knob to control the volume sent to your main speakers.
- Recording: Engage the REC switch to activate recording. Ensure your Digital Audio Workstation (DAW) software is configured to recognize the TEYUN Q12 as its input device.
5. Maintenance
To ensure the longevity and optimal performance of your TEYUN Q12 audio interface, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
- Storage: Store the device in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Handling: Avoid dropping or subjecting the device to strong impacts.
- Cable Management: Ensure cables are not kinked or strained, which can lead to damage over time.
6. Troubleshooting
If you encounter issues with your TEYUN Q12, try the following troubleshooting steps:
- No Sound Output:
- Check all cable connections (inputs, outputs, USB).
- Ensure the OUTPUT and PHONES knobs are turned up.
- Verify that the Q12 is selected as the audio output device in your computer's sound settings and DAW.
- Check if the input LEVEL knobs are sufficiently high and the SIG indicators are active.
- Distorted Sound / Clipping:
- Reduce the input LEVEL knobs if the PEAK indicators are lighting up.
- Ensure the output volume to your speakers/headphones is not too high.
- Check for damaged cables.
- Microphone Not Working (Condenser Mic):
- Ensure the +48V PHANTOM switch is ON.
- Check the microphone cable.
- Guitar Not Working:
- Ensure the HI-Z switch is ON for instrument input.
- Check the guitar cable.
- Device Not Recognized by Computer:
- Try a different USB port or USB cable.
- Restart your computer.
- Check your computer's device manager for driver issues.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | TEYUN |
| Model Number | TEYUN-Q12 |
| Type | Mixers / Audio Interface |
| Channels | 2 |
| Audio Resolution | 16-bit/48kHz |
| Phantom Power | 48V (Switchable) |
| Power Source | AC (via USB) |
| Built-in Battery | No |
| Inbox Adaptor | No (USB powered) |
| High-concerned chemical | None |
| Origin | Mainland China |
| Certifications | CE, FCC, RoHS, UL |
| Package Length | 17 cm |
| Package Width | 14 cm |
| Package Height | 6 cm |
| Package Weight | 0.32 kg |
8. User Tips
- Laptop Compatibility: The TEYUN Q12 is generally good for use with laptops for various plugins and recording software. Ensure your laptop has available USB ports and sufficient processing power for your audio tasks.
- Software Setup: When using with a Digital Audio Workstation (DAW), make sure to select the TEYUN Q12 as your primary audio input and output device within the DAW's preferences or settings.
- Gain Staging: Always aim for healthy input levels (SIG indicator active, PEAK indicator rarely flashing) to get the best signal-to-noise ratio without distortion.
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact the TEYUN Official Store directly. Keep your purchase receipt as proof of purchase.